1991 Volkswagen Golf 2.0 Reverse Light Plug Not Working [Easy Troubleshooting]

Do you own a 1991 Volkswagen Golf 2.0 and your reverse lights aren’t working You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, I’m here to help. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your reverse lights working again. So let’s get started!

Reasons Why 1991 Volkswagen Golf 2.0 Reverse Light Plug Not Working

Burnt-out bulb

The most common cause of a reverse light not working is a burnt-out bulb. To check if this is the case, remove the bulb from the socket and inspect it for damage. If the filament is broken, the bulb will need to be replaced.

Faulty wiring

Another common cause of a reverse light not working is a faulty wiring connection. To check for this, inspect the wiring harness for damage or corrosion. If you find any damage, the wiring harness will need to be repaired or replaced.

Faulty switch

The reverse light switch is responsible for sending power to the reverse lights when the car is in reverse. If the switch is faulty, it will not be able to send power to the lights, and they will not work. To check if the switch is faulty, you can use a multimeter to test for continuity between the switch and the lights. If there is no continuity, the switch will need to be replaced.

Faulty ground

The reverse lights need to have a good ground in order to work properly. If the ground connection is faulty, the lights will not work. To check for a faulty ground, you can use a multimeter to test for voltage between the ground wire and the body of the car. If there is no voltage, the ground connection will need to be repaired or replaced.

Also Read: 1991 Volkswagen Golf Reverse Light Not Working

How to Troubleshoot: 1991 Volkswagen Golf 2.0 Reverse Light Plug Not Working

The reverse light plug on a 1991 Volkswagen Golf 2.0 is a small electrical connector that sends power to the reverse lights. If this plug is not working, the reverse lights will not come on when you shift the transmission into reverse. This can be a dangerous situation, as it makes it difficult to see when you are backing up.

Symptoms

There are a few symptoms that may indicate that the reverse light plug on your 1991 Volkswagen Golf 2.0 is not working. These include:

The reverse lights do not come on when you shift the transmission into reverse.
The reverse lights come on when you are not in reverse.
The reverse lights flicker or are dim.

Causes

There are a few different things that could cause the reverse light plug on your 1991 Volkswagen Golf 2.0 to stop working. These include:

A loose or damaged wire.
A corroded or damaged connector.
A faulty reverse light switch.

Diagnosis

To diagnose the problem with the reverse light plug on your 1991 Volkswagen Golf 2.0, you will need to:

1. Inspect the wire harness for any damage. Look for loose or damaged wires, as well as corroded or burnt connectors.
2. Test the reverse light switch. To do this, you will need to disconnect the switch from the wiring harness and use a multimeter to check for continuity.
3. Replace the reverse light plug. If the wire harness and reverse light switch are both in good condition, the problem is likely with the reverse light plug itself. You can replace the plug by disconnecting the old one and connecting the new one.

Repair

To repair the reverse light plug on your 1991 Volkswagen Golf 2.0, you will need to:

1. Disconnect the negative battery terminal.
2. Remove the old reverse light plug.
3. Install the new reverse light plug.
4. Reconnect the negative battery terminal.

Prevention

To prevent the reverse light plug on your 1991 Volkswagen Golf 2.0 from malfunctioning, you can:

Keep the wire harness clean and free of debris.
Avoid exposing the wire harness to moisture.
Replace the reverse light plug if it is damaged.

Conclusion

The reverse light plug on a 1991 Volkswagen Golf 2.0 is a vital safety feature. If it is not working properly, it can be a dangerous situation. By following the steps in this article, you can troubleshoot and repair the problem quickly and easily.

FAQs: 1991 Volkswagen Golf 2.0 Reverse Light Plug Not Working

Why is my 1991 Volkswagen Golf 2.0 reverse light plug not working?

There are a few possible reasons why your 1991 Volkswagen Golf 2.0 reverse light plug may not be working.

The fuse is blown: Check the fuse box under the hood of your car and make sure that the fuse for the reverse lights is not blown. If the fuse is blown, you will need to replace it with a new one.

The wiring is damaged: The wiring for the reverse lights can be damaged if it is pinched, corroded, or frayed. Inspect the wiring carefully and make sure that it is in good condition. If the wiring is damaged, you will need to have it repaired or replaced.

The reverse light switch is faulty: The reverse light switch is a small switch that is located on the transmission. It tells the car’s electrical system to turn on the reverse lights when you put the car in reverse. If the reverse light switch is faulty, it will not be able to tell the car’s electrical system to turn on the reverse lights. You will need to have the reverse light switch replaced.

The reverse light bulb is burnt out: The reverse light bulb is a small bulb that is located in the rear of the car. If the reverse light bulb is burnt out, it will not be able to produce light. You will need to replace the reverse light bulb.

How do I check the fuse for the reverse lights on my 1991 Volkswagen Golf 2.0?

To check the fuse for the reverse lights on your 1991 Volkswagen Golf 2.0, follow these steps:

1. Open the hood of your car.
2. Locate the fuse box. The fuse box is usually located under the hood of your car, near the battery.
3. Find the fuse for the reverse lights. The fuse for the reverse lights is usually a 10 amp fuse.
4. Use a fuse tester to check the fuse. A fuse tester is a small device that you can use to check the condition of a fuse.
5. If the fuse is blown, replace it with a new one.

How do I check the wiring for the reverse lights on my 1991 Volkswagen Golf 2.0?

To check the wiring for the reverse lights on your 1991 Volkswagen Golf 2.0, follow these steps:

1. Turn off the car’s engine and open the hood.
2. Locate the wiring for the reverse lights. The wiring for the reverse lights is usually located in the rear of the car, near the trunk.
3. Inspect the wiring carefully for any damage. Look for signs of corrosion, fraying, or pinching.
4. If you find any damage to the wiring, repair or replace it as necessary.

How do I replace the reverse light switch on my 1991 Volkswagen Golf 2.0?

To replace the reverse light switch on your 1991 Volkswagen Golf 2.0, follow these steps:

1. Turn off the car’s engine and open the hood.
2. Locate the reverse light switch. The reverse light switch is a small switch that is located on the transmission.
3. Remove the two bolts that hold the reverse light switch in place.
4. Disconnect the electrical connector from the reverse light switch.
5. Remove the reverse light switch from the transmission.
6. Install the new reverse light switch.
7. Connect the electrical connector to the new reverse light switch.
8. Secure the reverse light switch with the two bolts.

How do I replace the reverse light bulb on my 1991 Volkswagen Golf 2.0?

To replace the reverse light bulb on your 1991 Volkswagen Golf 2.0, follow these steps:

1. Turn off the car’s engine and open the trunk.
2. Locate the reverse light bulb. The reverse light bulb is a small bulb that is located in the rear of the car, near the trunk.
3. Remove the two screws that hold the reverse light bulb in place.
4. Remove the reverse light bulb from the socket.
5. Install the new reverse light bulb.
6. Secure the reverse light bulb with the two screws.