2000 Ford Expedition Cruise Control Not Working [Quick And Easy Solutions]

Your 2000 Ford Expedition’s cruise control is a convenient feature that can help you save gas and reduce driver fatigue on long road trips. But when it stops working, it can be a major inconvenience.

In this guide, we’ll walk you through the steps to troubleshoot a 2000 Ford Expedition cruise control that’s not working. We’ll cover common causes of the problem, as well as how to diagnose and fix them.

We’ll also provide tips on how to prevent your cruise control from breaking down in the future.

So if your Expedition’s cruise control is acting up, read on for help!

Why 2000 Ford Expedition Cruise Control Not Working

Cruise Control Throttle Position Sensor

The cruise control throttle position sensor (TPS) is a potentiometer that sends a signal to the cruise control computer. The computer uses this signal to determine the current throttle position and adjust the cruise control speed accordingly. If the TPS is faulty, the cruise control will not work.

Cruise Control Brake Switch

The cruise control brake switch is a switch that tells the cruise control computer when the brakes are applied. If the brake switch is faulty, the cruise control will not work.

Cruise Control Bypass Switch

The cruise control bypass switch is a switch that allows the driver to temporarily override the cruise control. If the bypass switch is faulty, the cruise control will not work.

Cruise Control Computer

The cruise control computer is the electronic control unit that manages the cruise control system. If the computer is faulty, the cruise control will not work.

Cruise Control Wiring

The cruise control system is wired to the vehicle’s electrical system. If there is a problem with the wiring, the cruise control will not work.

How to Troubleshoot: 2000 Ford Expedition Cruise Control Not Working

The cruise control on your 2000 Ford Expedition is a convenient feature that can help you maintain a steady speed on long road trips. However, if your cruise control isn’t working, it can be a major inconvenience.

There are a few different things that could cause your cruise control to stop working. In this article, we’ll walk you through the steps to troubleshoot the problem and get your cruise control up and running again.

Troubleshooting Steps

1. Check the cruise control switch:
The first thing you should do is check the cruise control switch to make sure it’s turned on. The switch is located on the steering column, usually to the right of the steering wheel.

2. Check the cruise control fuse:
If the cruise control switch is turned on, the next step is to check the cruise control fuse. The fuse is located in the fuse box under the hood.
3. Check the cruise control actuator:
The cruise control actuator is a small motor that controls the throttle. It’s located under the hood, near the throttle body.

4. Check the cruise control wiring:
The cruise control system is controlled by a series of wires. These wires can become damaged over time, which can cause the cruise control to stop working.

5. Take your vehicle to a qualified mechanic:
If you’ve checked all of the above and your cruise control is still not working, it’s time to take your vehicle to a qualified mechanic. They will be able to diagnose the problem and make the necessary repairs.

Conclusion

The cruise control on your 2000 Ford Expedition is a valuable feature that can make long road trips more enjoyable. If your cruise control isn’t working, it can be a major inconvenience. However, by following the steps in this article, you can troubleshoot the problem and get your cruise control up and running again.

Additional Resources

[How to Use the Cruise Control on Your Ford Expedition](https://www.yourmechanic.com/article/how-to-use-the-cruise-control-on-your-ford-expedition)
[How to Troubleshoot a Cruise Control](https://www.caranddriver.com/how-to/a15136088/how-to-troubleshoot-a-cruise-control/)

Also Read: 2000 Ford Expedition Driver Window Not Working

FAQs: 2000 Ford Expedition Cruise Control Not Working

Why is my 2000 Ford Expedition cruise control not working?

There are a few possible reasons why your 2000 Ford Expedition cruise control may not be working.

The cruise control switch may be faulty: This is the most common cause of a cruise control not working. The switch can be tested by disconnecting the cruise control wiring harness from the switch and using a multimeter to check for continuity between the terminals. If there is no continuity, the switch will need to be replaced.

The cruise control actuator may be faulty: The actuator is the motor that controls the throttle valve. It can be tested by disconnecting the cruise control wiring harness from the actuator and using a multimeter to check for voltage at the terminals. If there is no voltage, the actuator will need to be replaced.

The cruise control computer may be faulty: The computer is the electronic control unit that regulates the cruise control system. It can be tested by disconnecting the cruise control wiring harness from the computer and using a multimeter to check for power and ground. If there is no power or ground, the computer will need to be replaced.

The cruise control wiring may be damaged: The cruise control wiring can be damaged due to corrosion, wear and tear, or a rodent infestation. It can be tested by inspecting the wiring for damage. If the wiring is damaged, it will need to be repaired or replaced.

How do I fix my 2000 Ford Expedition cruise control?

To fix your 2000 Ford Expedition cruise control, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it.

If the cruise control switch is faulty, you will need to replace it. To do this, you will need to remove the steering wheel and the cruise control switch. Once the switch is removed, you can install the new switch.

If the cruise control actuator is faulty, you will need to replace it. To do this, you will need to remove the throttle body and the cruise control actuator. Once the actuator is removed, you can install the new actuator.

If the cruise control computer is faulty, you will need to replace it. To do this, you will need to remove the instrument cluster and the cruise control computer. Once the computer is removed, you can install the new computer.

If the cruise control wiring is damaged, you will need to repair or replace it. To do this, you will need to inspect the wiring for damage and make the necessary repairs or replacements.

How can I prevent my 2000 Ford Expedition cruise control from breaking down?

There are a few things you can do to prevent your 2000 Ford Expedition cruise control from breaking down.

Regularly inspect the cruise control system for damage: Look for signs of corrosion, wear and tear, or a rodent infestation. If you see any damage, have it repaired or replaced as soon as possible.

Don’t use the cruise control on rough roads: The cruise control can be damaged if it is used on rough roads. If you have to use the cruise control on a rough road, use it at a low speed and avoid sudden acceleration or deceleration.

Don’t use the cruise control in stop-and-go traffic: The cruise control can be damaged if it is used in stop-and-go traffic. If you have to use the cruise control in stop-and-go traffic, use it at a low speed and be prepared to take your foot off the gas pedal if necessary.

What are the symptoms of a bad cruise control on a 2000 Ford Expedition?

There are a few symptoms that may indicate that your 2000 Ford Expedition cruise control is bad.

The cruise control will not engage:

The cruise control will not disengage:

The cruise control will not maintain a constant speed:

The cruise control will accelerate or decelerate suddenly:

The cruise control will make a buzzing or whining noise:

If you experience any of these symptoms, you should have your cruise control system inspected by a qualified mechanic.

What are the risks of driving with a bad cruise control on a 2000 Ford Expedition?

There are a few risks associated with driving with a bad cruise control on a 2000 Ford Expedition.

You could lose control of your vehicle: If the cruise