2007 Ford Expedition Heated Seats Not Working [You Should Try This]

Do your 2007 Ford Expedition heated seats not work You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple fix. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your heated seats working again. So if you’re ready to put an end to your chilly winter commutes, keep reading!

Why 2007 Ford Expedition Heated Seats Not Working

1. Faulty Seat Heater Element

The most common cause of a heated seat that is not working is a faulty seat heater element. The seat heater element is a metal strip that is embedded in the seat cushion and is heated by an electrical current. If the element is damaged or broken, it will not be able to generate heat and the seat will not warm up.

2. Faulty Seat Heater Control Switch

The seat heater control switch is responsible for turning the seat heater on and off. If the switch is faulty, it may not be able to send the electrical current to the seat heater element, or it may be sending the current at too low of a voltage. This will prevent the seat from warming up.

3. Faulty Seat Wiring

The seat heater element is connected to the vehicle’s electrical system by a set of wires. If these wires are damaged or corroded, they may not be able to properly conduct the electrical current to the seat heater element. This will prevent the seat from warming up.

4. Faulty Body Control Module (BCM)

The BCM is a computer that controls various electrical systems in the vehicle, including the heated seats. If the BCM is faulty, it may not be able to send the electrical current to the seat heater element. This will prevent the seat from warming up.

How to Troubleshoot: 2007 Ford Expedition Heated Seats Not Working

The heated seats in your 2007 Ford Expedition are a great way to stay warm on those cold winter days. However, if your heated seats are not working, it can be a major inconvenience. There are a few things that you can check to troubleshoot the problem and get your heated seats working again.

Step 1: Check the fuses

The first thing you should do is check the fuses for the heated seats. The fuses are located in the fuse box under the hood. There should be a fuse labeled Heated Seats or Seat Heater. Remove the fuse and inspect it for any damage. If the fuse is blown, replace it with a new one.

Step 2: Check the wiring

Once you have checked the fuses, you should check the wiring for the heated seats. The wiring is located under the seats. Look for any damaged or frayed wires. If you find any damaged wires, you will need to repair or replace them.

Step 3: Test the switch

The next step is to test the switch for the heated seats. The switch is located on the driver’s side of the center console. Turn the switch on and see if the heated seats come on. If the heated seats do not come on, you will need to replace the switch.

Step 4: Check the seat heater element

If the switch is working properly and the wiring is not damaged, the problem is likely with the seat heater element. The seat heater element is located in the seat cushion. You will need to remove the seat cushion to access the seat heater element. Once you have access to the seat heater element, you can test it with a multimeter. If the seat heater element is not working, you will need to replace it.

Conclusion

These are the steps that you can take to troubleshoot a problem with the heated seats in your 2007 Ford Expedition. If you are unable to fix the problem yourself, you can take your vehicle to a qualified mechanic.

Also Read: 2007 Ford Expedition Heater Not Working

FAQs: 2007 Ford Expedition Heated Seats Not Working

Why are my heated seats not working?

There are a few possible reasons why your heated seats may not be working.

The seat heater switch is turned off: Check to make sure that the seat heater switch is turned on. It is usually located on the center console or on the driver’s side door.

The seat heater fuse is blown: Check the fuse box for a blown fuse that may be responsible for the heated seats not working.

The seat heater wiring is damaged: The wiring for the heated seats can be damaged if the seats are bumped or if something heavy is placed on them. If the wiring is damaged, it will need to be repaired or replaced.

The seat heater element is defective: The seat heater element is the part that actually heats the seats. If the element is defective, it will need to be replaced.

How do I turn on the heated seats?

To turn on the heated seats, locate the seat heater switch. It is usually located on the center console or on the driver’s side door. The switch may have a picture of a seat with a heat wave coming off of it.

To turn on the heated seats, press the switch. The switch may have a number of different settings, such as low, medium, and high. You can choose the setting that you prefer.

How do I fix a blown seat heater fuse?

To fix a blown seat heater fuse, you will need to find the fuse box. The fuse box is usually located under the hood of the car.

Once you have found the fuse box, locate the fuse for the heated seats. The fuse may be labeled Heated Seats or Seat Heater.

To replace the fuse, remove the old fuse by carefully pulling it out of the fuse box. Then, insert the new fuse into the fuse box.

How do I repair damaged seat heater wiring?

To repair damaged seat heater wiring, you will need to locate the damaged wiring. The wiring may be located under the seats or in the door panels.

Once you have located the damaged wiring, you will need to repair it. You can repair the wiring by soldering it or by using a wire splice.

How do I replace a defective seat heater element?

To replace a defective seat heater element, you will need to remove the seat from the car. Once the seat is removed, you will need to locate the seat heater element. The seat heater element is usually located under the seat cushion.

To remove the seat heater element, you will need to carefully disconnect the electrical connectors. Then, you will need to remove the old seat heater element.

Once the old seat heater element is removed, you can install the new seat heater element. Be sure to reconnect the electrical connectors.

Finally, you can reinstall the seat in the car.