2011 Ford Expedition Radio Display Not Working [Easy Troubleshooting]

Do you own a 2011 Ford Expedition and are experiencing issues with the radio display If so, you are not alone. This is a common problem that can be frustrating and inconvenient. However, there is a simple fix. In this guide, I will walk you through the steps on how to troubleshoot and repair the radio display on your 2011 Ford Expedition.

Why 2011 Ford Expedition Radio Display Not Working

No power to the radio

The fuse for the radio may be blown.
The radio antenna may be disconnected or damaged.
The radio may be in protect mode.
The radio may need to be reset.

Radio display is dim or unreadable

The radio display may be dirty.
The radio display may be damaged.
The radio display may need to be replaced.

Radio display is distorted or pixelated

The radio display may be damaged.
The radio display may need to be replaced.

Radio display is blank

The radio display may be damaged.
The radio display may need to be replaced.

How to Troubleshoot: 2011 Ford Expedition Radio Display Not Working

The radio display in your 2011 Ford Expedition is an important part of the vehicle’s infotainment system. It provides you with information about the radio station you’re listening to, the current song playing, and the time. If the radio display isn’t working, it can be a major inconvenience.

There are a few different things that could cause the radio display to stop working. In this article, we’ll walk you through the steps to troubleshoot the problem and get your radio display working again.

Step 1: Check the fuses

The first thing you should do is check the fuses for the radio display. The fuses are located in the fuse box under the hood of your Expedition.

To check the fuses, you’ll need a fuse puller. You can find a fuse puller at any auto parts store.

Once you have the fuse puller, open the fuse box and locate the fuses for the radio display. The fuses are usually labeled radio or audio.

Remove each fuse and inspect it for damage. If the fuse is blown, replace it with a new fuse of the same amperage.

Once you’ve replaced the fuse, try turning on the radio display. If the radio display is still not working, move on to the next step.

Step 2: Check the wiring

The next thing you should do is check the wiring for the radio display. The wiring for the radio display is located in the dashboard of your Expedition.

To check the wiring, you’ll need a multimeter. You can find a multimeter at any hardware store.

Once you have the multimeter, turn on the power to your Expedition.

Use the multimeter to check the voltage at the connector for the radio display. The voltage should be between 12 and 14 volts.

If the voltage is not within the specified range, there is a problem with the wiring. You will need to have the wiring repaired by a qualified technician.

Once the wiring is repaired, try turning on the radio display. If the radio display is still not working, move on to the next step.

Step 3: Reset the radio display

The next thing you should do is reset the radio display. To reset the radio display, you’ll need to follow the instructions in your Expedition’s owner’s manual.

Once you’ve reset the radio display, try turning it on. If the radio display is still not working, move on to the next step.

Step 4: Take your Expedition to a qualified technician

If you’ve tried all of the steps above and the radio display is still not working, you’ll need to take your Expedition to a qualified technician. The technician will be able to diagnose the problem and fix it.

Conclusion

The radio display in your 2011 Ford Expedition is an important part of the vehicle’s infotainment system. If the radio display isn’t working, it can be a major inconvenience.

By following the steps in this article, you can troubleshoot the problem and get your radio display working again. If you’re unable to fix the problem yourself, you’ll need to take your Expedition to a qualified technician.

Also Read: 2012 Ford Expedition Dvd Player Not Working

FAQs: 2011 Ford Expedition Radio Display Not Working

Why is my 2011 Ford Expedition radio display not working?

There are a few possible reasons why your 2011 Ford Expedition radio display may not be working.

The fuse for the radio may be blown: Check the fuse box in the engine compartment and make sure that the fuse for the radio is not blown. If it is blown, replace it with a new fuse of the same amperage.

The radio may be in need of a software update: Check the Ford website to see if there is a software update available for your radio. If there is, download and install the update.

The radio may be damaged: If the radio is damaged, it will need to be repaired or replaced.

How do I reset my 2011 Ford Expedition radio display?

To reset your 2011 Ford Expedition radio display, follow these steps:

1. Turn off the ignition.
2. Press and hold the following buttons simultaneously:

Power

Tune Up

Source
3. While holding these buttons, turn on the ignition.
4. Keep holding the buttons until the radio display resets.

How do I turn off the clock on my 2011 Ford Expedition radio display?

To turn off the clock on your 2011 Ford Expedition radio display, follow these steps:

1. Press the Menu button.
2. Use the Volume or Tune Up buttons to scroll to the Settings menu.
3. Press the Enter button.
4. Use the Volume or Tune Up buttons to scroll to the Clock option.
5. Press the Enter button.
6. Use the Volume or Tune Up buttons to toggle the Clock option off.

How do I change the time on my 2011 Ford Expedition radio display?

To change the time on your 2011 Ford Expedition radio display, follow these steps:

1. Press the Menu button.
2. Use the Volume or Tune Up buttons to scroll to the Settings menu.
3. Press the Enter button.
4. Use the Volume or Tune Up buttons to scroll to the Clock option.
5. Press the Enter button.
6. Use the Volume or Tune Up buttons to change the hour.
7. Press the Enter button.
8. Use the Volume or Tune Up buttons to change the minute.
9. Press the Enter button.

How do I change the radio station on my 2011 Ford Expedition radio display?

To change the radio station on your 2011 Ford Expedition radio display, follow these steps:

1. Press the Tune Up or Down buttons to scroll through the available radio stations.
2. Press the Enter button to select a radio station.
3. To listen to a different band of radio stations, press the Band button.