2012 Ford Expedition Dvd Player Not Working [Fixed]

Do you have a 2012 Ford Expedition with a DVD player that isn’t working You’re not alone. This is a common problem, and there are a few things you can do to troubleshoot the issue and get your DVD player working again.

In this guide, we’ll walk you through the steps to troubleshoot a 2012 Ford Expedition DVD player that isn’t working. We’ll cover everything from checking the fuses to replacing the DVD player itself.

By the end of this guide, you’ll have a good understanding of the problem and how to fix it. So if your 2012 Ford Expedition DVD player isn’t working, read on for help!

Why 2012 Ford Expedition Dvd Player Not Working

No Power to DVD Player

The DVD player fuse is blown.
The DVD player wiring is damaged.
The DVD player is not receiving power from the car’s electrical system.

DVD Player Malfunction

The DVD player is not reading discs.
The DVD player is skipping or freezing.
The DVD player is displaying an error message.

Other Causes

The car’s entertainment system is in a different mode (e.g., radio, CD player).
The car’s entertainment system is not properly connected to the car’s electrical system.
The car’s entertainment system is outdated and needs to be upgraded.

How to Troubleshoot: 2012 Ford Expedition DVD Player Not Working

Your 2012 Ford Expedition’s DVD player is an important entertainment feature, but it can be frustrating when it stops working. There are a few common reasons why this might happen, and fortunately, most of them are easy to fix. In this article, we’ll walk you through the steps to troubleshoot a 2012 Ford Expedition DVD player that’s not working.

Step 1: Check the fuses

The first thing you should do is check the fuses for the DVD player. The fuses are located in the fuse box under the hood. There are two fuses that you need to check: the Radio/DVD fuse and the AMP fuse.

To check a fuse, use a fuse tester or a multimeter. If the fuse is blown, replace it with a new fuse of the same amperage.

Step 2: Check the wiring

Once you’ve checked the fuses, you should check the wiring for the DVD player. The wiring is located in the passenger-side kick panel.

To check the wiring, look for any damaged or frayed wires. If you find any damage, repair or replace the wires as needed.

Step 3: Reset the DVD player

If the fuses and wiring are okay, you can try resetting the DVD player. To do this, turn off the ignition and disconnect the negative battery terminal for 10 seconds. Then, reconnect the battery terminal and turn on the ignition.

Step 4: Update the firmware

If the DVD player is still not working, you can try updating the firmware. The firmware is the software that controls the DVD player. To update the firmware, you’ll need to download the latest firmware from Ford’s website and follow the instructions on the website to install it.

Step 5: Take it to a mechanic

If you’ve tried all of the steps above and the DVD player is still not working, you’ll need to take it to a mechanic. The mechanic will be able to diagnose the problem and repair the DVD player.

Conclusion

Troubleshooting a 2012 Ford Expedition DVD player that’s not working can be a frustrating experience, but it’s usually not too difficult to fix. By following the steps in this article, you should be able to get your DVD player working again in no time.

Also Read: 2012 Ford Expedition Heated And Cooled Seats Not Working

Frequently Asked Questions about 2012 Ford Expedition DVD Player Not Working

1. Why is my 2012 Ford Expedition DVD player not working?

There could be several reasons for this issue
including a faulty DVD player unit
electrical problems
or issues with the connections. It’s best to have a professional diagnose the specific cause.

2. How can I troubleshoot the DVD player in my 2012 Ford Expedition?

You can start by checking the connections and ensuring that the power supply is working properly. It’s also helpful to inspect the DVD player unit for any visible damage. If the issue persists
seeking professional assistance is recommended.

3. Can I replace the DVD player in my 2012 Ford Expedition myself?

While it’s possible to replace the DVD player yourself
it’s important to have the necessary technical knowledge and tools. If you’re unsure
it’s best to have a professional handle the replacement to avoid causing further damage.

4. What are common signs of a failing DVD player in a 2012 Ford Expedition?

Common signs include the DVD player not powering on
not accepting discs
or producing distorted audio/video output. Any unusual noises or error messages may also indicate a problem.

5. How much does it cost to repair a malfunctioning DVD player in a 2012 Ford Expedition?

The cost of repair can vary depending on the specific issue and the labor rates in your area. It’s advisable to consult with a qualified mechanic or automotive technician to obtain an accurate estimate for the repair.