2013 Ford Expedition Blower Motor Not Working? Fix It Today!

The blower motor in your 2013 Ford Expedition is responsible for circulating air through the cabin. When it stops working, it can be a major inconvenience. You may find yourself sweating and uncomfortable on hot days, or freezing on cold ones. In addition, the lack of airflow can make it difficult to see out the windshield, which can be dangerous.

If your 2013 Ford Expedition blower motor isn’t working, don’t despair. This is a common problem, and it can usually be fixed at home with a few simple tools. In this guide, we’ll walk you through the steps of troubleshooting and repairing your blower motor.

Reasons Why 2013 Ford Expedition Blower Motor Not Working

Here are the reasons:

Blower Motor Fuse

The blower motor fuse is a 20-amp fuse located in the under-hood fuse block. If the fuse is blown, it will need to be replaced.

Blower Motor Relay

The blower motor relay is a 40-amp relay located in the under-hood fuse block. If the relay is faulty, it will need to be replaced.

Blower Motor Control Module (BCM)

The blower motor control module (BCM) is a computer that controls the blower motor. If the BCM is faulty, it will need to be replaced.

Blower Motor

The blower motor is an electric motor that moves air through the vents. If the blower motor is faulty, it will need to be replaced.

How to Troubleshoot: 2013 Ford Expedition Blower Motor Not Working

Symptoms of a Blower Motor Problem

There are a few different symptoms that you may experience if your 2013 Ford Expedition blower motor is not working properly. These include:

The blower motor does not come on at all.
The blower motor only works on one speed.
The blower motor makes a loud noise.
The blower motor smells like burning plastic.

Causes of a Blower Motor Problem

There are a few different things that can cause a blower motor problem in a 2013 Ford Expedition. These include:

A blown fuse.
A bad blower motor resistor.
A bad blower motor.
A bad wiring harness.

How to Troubleshoot a Blower Motor Problem

To troubleshoot a blower motor problem in a 2013 Ford Expedition, you will need to:

1. Check the fuses.
2. Check the blower motor resistor.
3. Check the blower motor.
4. Check the wiring harness.

How to Fix a Blower Motor Problem

Once you have diagnosed the cause of the blower motor problem, you can fix it by:

Replacing the blown fuse.
Replacing the bad blower motor resistor.
Replacing the bad blower motor.
Replacing the bad wiring harness.

Preventing Blower Motor Problems

You can help prevent blower motor problems in your 2013 Ford Expedition by:

Keeping the interior of your vehicle clean.
Avoiding driving through deep water.
Having your vehicle serviced regularly.

By following these tips, you can help keep your 2013 Ford Expedition blower motor running smoothly for many years to come.

Also Read: 2013 Ford Expedition Heated And Cooled Seats Not Working

FAQs: 2013 Ford Expedition Blower Motor Not Working

Why is my 2013 Ford Expedition blower motor not working?

There are a few possible reasons why your 2013 Ford Expedition blower motor may not be working. Here are some of the most common causes:

A blown fuse: The blower motor fuse is located in the fuse box under the hood. Check the fuse to make sure it is not blown. If the fuse is blown, you will need to replace it.

A faulty blower motor resistor: The blower motor resistor controls the speed of the blower motor. If the resistor is faulty, it can cause the blower motor to not work at all or to only work at low speeds. You will need to replace the blower motor resistor.

A faulty blower motor: The blower motor itself may be faulty. If the blower motor is faulty, you will need to replace it.

A clogged air filter: A clogged air filter can restrict airflow to the blower motor, which can cause it to overheat and malfunction. You should check the air filter and replace it if it is dirty or clogged.

A problem with the wiring: The wiring to the blower motor may be damaged or corroded. This can cause the blower motor to not work properly. You will need to have the wiring checked and repaired or replaced.

How do I fix a blower motor in a 2013 Ford Expedition?

To fix a blower motor in a 2013 Ford Expedition, you will need to:

1. Locate the blower motor fuse. The fuse is located in the fuse box under the hood.
2. Remove the fuse.
3. Check the fuse to make sure it is blown. If the fuse is blown, you will need to replace it.
4. Locate the blower motor resistor. The blower motor resistor is located under the dashboard.
5. Remove the blower motor resistor.
6. Check the blower motor resistor to make sure it is faulty. If the resistor is faulty, you will need to replace it.
7. Reconnect the blower motor resistor.
8. Replace the fuse.
9. Turn on the car and test the blower motor.

What are the symptoms of a bad blower motor in a 2013 Ford Expedition?

The symptoms of a bad blower motor in a 2013 Ford Expedition may include:

The blower motor does not work at all.
The blower motor only works at low speeds.
The blower motor makes a loud noise.
The blower motor smells like burning plastic.
The blower motor is hot to the touch.

How much does it cost to replace a blower motor in a 2013 Ford Expedition?

The cost to replace a blower motor in a 2013 Ford Expedition will vary depending on the mechanic and the parts used. The average cost to replace a blower motor is between $100 and $200.

Can I replace the blower motor myself in a 2013 Ford Expedition?

Yes, you can replace the blower motor yourself in a 2013 Ford Expedition. However, it is a relatively involved job that requires some basic mechanical skills. If you are not comfortable working on your car, it is best to have the blower motor replaced by a qualified mechanic.