2014 Ford Expedition: Heated Seats Not Working? Fix It Now!

Do your 2014 Ford Expedition heated seats not work You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, I’m here to help.

In this guide, I’ll walk you through the steps to troubleshoot the issue and get your heated seats working again. I’ll also provide some tips on how to prevent this problem from happening in the future.

So if you’re ready to get your heated seats back up and running, let’s get started!

Reasons Why 2014 Ford Expedition Heated Seats Not Working

Here are the reasons:

No power to heated seats

The most common cause of heated seats not working is a lack of power to the seats. This can be caused by a blown fuse, a faulty wiring harness, or a problem with the seat control module.
To check for a blown fuse, use a multimeter to test the fuse in the fuse box. If the fuse is blown, replace it with a fuse of the same amperage.
To check the wiring harness, inspect the wiring for damage or corrosion. If the wiring is damaged, repair or replace it as necessary.
To test the seat control module, use a diagnostic tool to scan for codes. If there are any codes related to the heated seats, the seat control module may need to be replaced.

Faulty heated seat switch

Another common cause of heated seats not working is a faulty heated seat switch. The heated seat switch is located on the driver’s or passenger’s seat and controls the power to the heated seats.
To test the heated seat switch, use a multimeter to test the switch for continuity. If the switch is not working properly, it will need to be replaced.

Faulty heated seat element

In some cases, the heated seat element itself may be faulty. The heated seat element is located in the seat cushion and generates heat to warm the seat.
To test the heated seat element, use a multimeter to test the element for continuity. If the element is not working properly, it will need to be replaced.

How to Troubleshoot: 2014 Ford Expedition Heated Seats Not Working

Symptoms

There are a few different symptoms that you may experience if the heated seats in your 2014 Ford Expedition are not working. These include:

The heated seats do not turn on at all.
The heated seats only turn on on one side.
The heated seats only turn on at a low temperature.
The heated seats turn on and off randomly.
The heated seats make a buzzing or humming noise.

Causes

There are a number of different things that could cause the heated seats in your 2014 Ford Expedition to stop working. These include:

A blown fuse.
A faulty switch.
A bad wiring harness.
A defective seat heater element.

Diagnosis

To diagnose the problem with your heated seats, you will need to:

1. Check the fuses.
2. Test the switch.
3. Check the wiring harness.
4. Test the seat heater element.

Repair

Once you have diagnosed the problem with your heated seats, you can repair it by:

1. Replacing the blown fuse.
2. Replacing the faulty switch.
3. Repairing the damaged wiring harness.
4. Replacing the defective seat heater element.

Prevention

To prevent your heated seats from malfunctioning, you can:

Avoid overloading the electrical system.
Avoid spilling liquids on the seats.
Keep the seats clean and free of dirt and debris.

Conclusion

If you are experiencing problems with the heated seats in your 2014 Ford Expedition, you can troubleshoot and repair the problem yourself using the information in this article. If you are not comfortable working on your vehicle, you can take it to a qualified mechanic for repairs.

Also Read: 2015 Ford Expedition Ac Fan Not Working

FAQs: 2014 Ford Expedition Heated Seats Not Working

Why aren’t my heated seats working?

There are a few possible reasons why your heated seats may not be working.

The seat heater switch is turned off: Make sure that the switch is turned to the On position.

The seat heater fuse is blown: Check the fuse box for a blown fuse that may be preventing the heated seats from working.

The seat heater wiring is damaged: The wiring that connects the heated seats to the car’s electrical system may be damaged, preventing power from reaching the seats.

The seat heater element is defective: The heated seat element may be defective, preventing it from generating heat.

How do I turn on the heated seats?

To turn on the heated seats, locate the seat heater switch on the center console. The switch is usually a rocker switch with two positions: On and Off.

To turn on the heated seats, move the switch to the On position. The seats will start to heat up.

You can adjust the temperature of the heated seats by moving the switch to the High or Low position.

How long do the heated seats stay on?

The heated seats will stay on for as long as the switch is in the On position. However, most vehicles have a timer that will automatically turn off the heated seats after a certain period of time (usually 10-15 minutes).

You can also turn off the heated seats manually by moving the switch to the Off position.

What should I do if my heated seats are not working?

If your heated seats are not working, you should first check the seat heater switch to make sure that it is turned on. You should also check the fuse box for a blown fuse.

If the seat heater switch and fuse are both working properly, you should have a mechanic check the wiring and seat heater element to determine the cause of the problem.

How much does it cost to fix heated seats?

The cost of fixing heated seats will vary depending on the cause of the problem. If the seat heater switch or fuse is blown, the cost of replacing them will be relatively inexpensive. However, if the wiring or seat heater element is damaged, the cost of repairs will be more expensive.

You can get an estimate of the cost of repairs from a mechanic.