2014 Gmc Sierra Oil Change Guide [Explored]

The 2014 GMC Sierra requires 5 quarts of 5W-30 oil and a new oil filter every 3,000 miles or 3 months. You can find the oil drain plug on the bottom of the engine, and the oil filter is located on the top of the engine.

So 2014 Gmc Sierra Oil Change Guide?

2014 GMC Sierra Oil Change Guide

Oil type:

5W-30 synthetic blend

Oil filter:

Wix 51951

Oil capacity:

6 quarts

Torque:

27 ft-lbs

1. Park the vehicle on a level surface.
2. Engage the parking brake.
3. Remove the oil drain plug and allow the oil to drain completely.
4. Replace the oil drain plug and tighten to 27 ft-lbs.
5. Remove the oil filter.
6. Apply a thin coat of new oil to the gasket of the new oil filter.
7. Hand-tighten the oil filter until it is snug.
8. Add 6 quarts of new oil to the engine.
9. Start the engine and let it run for a few minutes.
10. Check the oil level and add more oil if necessary.
11. Turn off the engine and check for leaks.

2014 GMC Sierra Oil Change Guide

What You Need

New oil filter (see your owner’s manual for the correct size)
Oil drain pan
Funnel
5 quarts of 5W-30 oil (or the type specified in your owner’s manual)
Wrench
Rags

How to Change the Oil

1. Park your Sierra on a level surface. Turn off the engine and let it cool down. Engage the parking brake.
2. Locate the oil drain plug on the bottom of the oil pan. It is usually a 17mm bolt.
3. Place the oil drain pan under the oil drain plug.
4. Use the wrench to loosen the oil drain plug. Allow all of the oil to drain out of the oil pan.
5. Replace the oil drain plug and tighten it securely.
6. Locate the oil filter on the top of the engine. It is usually a black cylindrical object with a 17mm hex head.
7. Use the wrench to loosen the oil filter. Be careful not to spill any oil.
8. Apply a thin coat of new oil to the gasket of the new oil filter.
9. Screw the new oil filter onto the oil filter housing until it is snug. Do not overtighten.
10. Add 5 quarts of new oil to the oil filler hole on the top of the engine.
11. Use the dipstick to check the oil level. The oil level should be between the full and add marks on the dipstick.
12. Start the engine and let it run for a few minutes.
13. Turn off the engine and check for leaks.

Tips

Make sure to use the correct type of oil for your Sierra. The type of oil is usually listed in your owner’s manual.
Be careful not to spill any oil when draining the oil pan or changing the oil filter.
Wipe up any spills with rags.
Dispose of the old oil and oil filter properly.
Check the oil level regularly and add oil as needed.
Change the oil and oil filter according to the maintenance schedule in your owner’s manual.

Also Read: Acura Mdx Bluetooth Not Working

2014 GMC Sierra Oil Change Guide – FAQs

How often should I change the oil in my 2014 GMC Sierra?

Every 5,000 miles or 6 months, whichever comes first.

What type of oil do I need for my 2014 GMC Sierra?

You will need 5W-30 full synthetic oil.

How much oil do I need for an oil change in my 2014 GMC Sierra?

You will need 6 quarts of oil.

Where can I get an oil change for my 2014 GMC Sierra?

You can get an oil change at any local auto repair shop or dealership.

How much does an oil change cost for a 2014 GMC Sierra?

The average cost of an oil change for a 2014 GMC Sierra is $35-$50.