2016 Ford Expedition: Heated Seats Not Working? Fix It Now!

Do you own a 2016 Ford Expedition and your heated seats aren’t working You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there is a fix! In this guide, I’ll walk you through the steps to troubleshoot the issue and get your heated seats working again. So, if you’re ready to get back to enjoying your warm, toasty seats, keep reading!

Reasons Why 2016 Ford Expedition Heated Seats Not Working

Here are the reasons:

No power to the heated seats

The most common cause of heated seats not working is a lack of power to the seats. This can be caused by a blown fuse, a faulty wiring harness, or a problem with the seat control module.
To check for a blown fuse, consult your vehicle’s owner’s manual for the fuse location. Remove the fuse and inspect it for a blown element. If the fuse is blown, replace it with a new one of the same amperage.
To check the wiring harness, use a multimeter to check for continuity between the seat control module and the seats. If there is no continuity, the wiring harness is faulty and will need to be replaced.
To check the seat control module, use a diagnostic tool to scan for codes. If there are any codes related to the heated seats, the seat control module is likely faulty and will need to be replaced.

Faulty heated seat switch

Another common cause of heated seats not working is a faulty heated seat switch. The heated seat switch is responsible for sending power to the seats. If the switch is faulty, it will not be able to send power to the seats, and they will not heat up.
To check the heated seat switch, use a multimeter to check for continuity between the switch and the seat control module. If there is no continuity, the switch is faulty and will need to be replaced.

Faulty heated seat element

In rare cases, the heated seat element itself can be faulty. The heated seat element is what actually generates the heat for the seats. If the element is faulty, it will not be able to generate heat, and the seats will not heat up.
To check the heated seat element, use a multimeter to check for continuity between the element and the seat control module. If there is no continuity, the element is faulty and will need to be replaced.

How to Troubleshoot: 2016 Ford Expedition Heated Seats Not Working

The heated seats in your 2016 Ford Expedition are a great way to stay warm on those cold winter days. However, if your heated seats are not working, it can be a real inconvenience. There are a few things that you can check to troubleshoot the problem and get your heated seats working again.

Step 1: Check the fuse

The first thing you should check is the fuse for the heated seats. The fuse box is located under the hood of your Expedition. There should be a fuse labeled Heated Seats or Seat Heater. Remove the fuse and check to see if it is blown. If the fuse is blown, you will need to replace it with a new one.

Step 2: Check the wiring

Once you have checked the fuse, you should check the wiring for the heated seats. The wiring for the heated seats is located under the seats. You will need to remove the seats to access the wiring. Inspect the wiring for any damage or corrosion. If you find any damage, you will need to repair or replace the wiring.

Step 3: Check the switch

The next thing you should check is the switch for the heated seats. The switch is located on the center console of your Expedition. Inspect the switch for any damage or corrosion. If you find any damage, you will need to replace the switch.

Step 4: Check the control module

If you have checked all of the above and your heated seats are still not working, the problem may be with the control module. The control module is located under the dash of your Expedition. You will need to have a qualified technician diagnose and repair the control module.

Conclusion

These are the steps that you can take to troubleshoot the problem of your 2016 Ford Expedition heated seats not working. If you are unable to fix the problem yourself, you can take your vehicle to a qualified technician for diagnosis and repair.

Also Read: 2016 Ford Expedition Heater Not Working

FAQs: 2016 Ford Expedition Heated Seats Not Working

Why aren’t my heated seats working?

There are a few possible reasons why your heated seats may not be working. Here are some of the most common causes:

The seat heater switch is turned off: Make sure that the switch is turned on and that the temperature is set to a high enough level.

The seat heater fuse is blown: Check the fuse box for a blown fuse that may be causing the problem.

The seat heater wiring is damaged: The wiring for the seat heaters can be damaged if the seats are subjected to excessive wear and tear. If the wiring is damaged, it will need to be repaired or replaced.

The seat heater element is defective: The seat heater element can become defective over time. If the element is defective, it will need to be replaced.

How do I turn on the heated seats in my 2016 Ford Expedition?

To turn on the heated seats in your 2016 Ford Expedition, follow these steps:

1. Press the Climate Control button on the dashboard.
2. Use the Temperature and Fan Speed controls to set the desired temperature and fan speed.
3. Press the Heated Seats button to turn on the heated seats.
4. Use the Seat Heater controls to set the desired temperature for the heated seats.

How do I fix a blown fuse in my 2016 Ford Expedition?

To fix a blown fuse in your 2016 Ford Expedition, follow these steps:

1. Open the fuse box. The fuse box is located under the dashboard on the driver’s side.
2. Find the fuse that is blown. The blown fuse will be blackened or melted.
3. Remove the blown fuse by using the fuse puller.
4. Replace the blown fuse with a new fuse that has the same amperage rating.

How do I repair damaged seat heater wiring in my 2016 Ford Expedition?

To repair damaged seat heater wiring in your 2016 Ford Expedition, follow these steps:

1. Locate the damaged wiring. The damaged wiring will be frayed or broken.
2. Strip the ends of the damaged wiring.
3. Solder the ends of the damaged wiring together.
4. Cover the soldered joint with electrical tape.

How do I replace a defective seat heater element in my 2016 Ford Expedition?

To replace a defective seat heater element in your 2016 Ford Expedition, follow these steps:

1. Remove the seat from the vehicle.
2. Remove the old seat heater element.
3. Install the new seat heater element.
4. Reinstall the seat in the vehicle.