2016 Ford Expedition: Remote Start Not Working? Fix It Now!

Your 2016 Ford Expedition’s remote start is a convenient feature that allows you to start the engine and warm up the car from the comfort of your home or office. However, when the remote start doesn’t work, it can be a major inconvenience. You may be left standing in the cold, waiting for your car to warm up, or you may even be late for work.

In this guide, we’ll walk you through the steps to troubleshoot a 2016 Ford Expedition remote start that isn’t working. We’ll cover everything from checking the battery in your remote to resetting the system. By the end of this guide, you’ll be able to get your remote start working again in no time.

Reasons Why 2016 Ford Expedition Remote Start Not Working

Here are the reasons:

Dead or Weak Battery

The most common reason for a remote start not working is a dead or weak battery. The remote start system requires a lot of power to operate, and if the battery is not up to the task, it will not be able to start the vehicle. To check the battery, use a voltmeter to measure the voltage. If the voltage is below 12.6 volts, the battery is too weak and needs to be replaced.

Faulty Remote Start Module

The remote start module is the electronic component that controls the remote start system. If the module is faulty, it will not be able to send the signal to the starter to start the vehicle. To check the module, you can use a diagnostic tool to scan for codes. If there are any codes related to the remote start system, the module is likely faulty and needs to be replaced.

Bad Starter Motor

The starter motor is the mechanical component that actually starts the engine. If the starter motor is faulty, it will not be able to turn the engine over and start the vehicle. To check the starter motor, you can use a voltmeter to measure the voltage at the starter motor terminals. If there is no voltage, the starter motor is likely faulty and needs to be replaced.

Improper Installation

If the remote start system was not installed correctly, it may not be working properly. To check the installation, you can consult the installation instructions for your particular vehicle. If the installation does not appear to be correct, you may need to have it reinstalled by a qualified technician.

How to Troubleshoot: 2016 Ford Expedition Remote Start Not Working

The 2016 Ford Expedition is a popular SUV that comes standard with a remote start feature. This feature allows you to start your vehicle from outside, so it’s warm or cool when you’re ready to get in. However, there are a few things that can go wrong with the remote start system, and if it’s not working, you may need to troubleshoot the issue.

Possible Causes

There are a few different things that could cause your 2016 Ford Expedition remote start not to work. Here are some of the most common causes:

Dead battery:

The most common cause of a remote start not working is a dead battery. If the battery in your key fob is low, it may not have enough power to send the signal to the vehicle. To check the battery, you can remove the key fob from your keychain and look for a small LED light. If the light is not lit, the battery is dead and needs to be replaced.

Weak signal:

Another common cause of a remote start not working is a weak signal. If there is something blocking the signal between the key fob and the vehicle, the remote start may not be able to work. Some common things that can block the signal include metal objects, buildings, and trees.

Faulty remote start module:

The remote start module is the part of the vehicle that receives the signal from the key fob and starts the engine. If the remote start module is faulty, it may not be able to receive the signal from the key fob or it may not be able to start the engine.

Faulty wiring:

The wiring between the key fob and the remote start module can become damaged or corroded, which can prevent the signal from being sent properly. If you suspect that the wiring is damaged, you should have it inspected by a qualified mechanic.

Troubleshooting Steps

If your 2016 Ford Expedition remote start is not working, you can try the following troubleshooting steps:

1. Check the battery in your key fob:
If the battery is dead, replace it with a new one.

2. Check the signal strength:
Move the key fob around and see if the remote start works from different locations. If the remote start works from some locations but not others, there may be something blocking the signal.3. Try resetting the remote start module:
To reset the remote start module, follow the instructions in your owner’s manual.

4. Have the remote start system inspected by a qualified mechanic:
If you have tried the troubleshooting steps above and the remote start still not working, you should have the system inspected by a qualified mechanic.

Conclusion

The 2016 Ford Expedition remote start is a convenient feature, but it can be frustrating when it’s not working. If you’re having trouble with your remote start, try the troubleshooting steps above. If you’re still having problems, you should have the system inspected by a qualified mechanic.

Also Read: 2016 Ford Expedition Steering Wheel Controls Not Working

FAQs: 2016 Ford Expedition Remote Start Not Working

Why is my 2016 Ford Expedition remote start not working?

There are a few possible reasons why your 2016 Ford Expedition remote start may not be working. Here are some of the most common causes:

The battery in your remote is dead: This is the most common cause of a remote start not working. Try replacing the battery in your remote and see if that fixes the problem.

The remote is out of range: The remote start system on your Ford Expedition has a maximum range of about 500 feet. If you’re trying to start your car from farther away than that, the remote may not be able to reach it.

The remote is not programmed correctly: If you recently purchased your Ford Expedition or had the remote start system installed, it’s possible that the remote is not programmed correctly. You can reprogram the remote yourself using the instructions in your owner’s manual, or you can take your car to a Ford dealer and have them reprogram it for you.

The remote start system is malfunctioning: If you’ve tried all of the above solutions and your remote start system is still not working, it’s possible that the system itself is malfunctioning. In this case, you’ll need to take your car to a Ford dealer to have the system repaired or replaced.

How do I fix my 2016 Ford Expedition remote start?

If your 2016 Ford Expedition remote start is not working, you can try the following solutions:

Check the battery in your remote: If the battery is dead, replace it with a new one.

Make sure the remote is within range of the car: The remote start system has a maximum range of about 500 feet. If you’re trying to start your car from farther away than that, the remote may not be able to reach it.

Reprogram the remote: If you recently purchased your Ford Expedition or had the remote start system installed, it’s possible that the remote is not programmed correctly. You can reprogram the remote yourself using the instructions in your owner’s manual, or you can take your car to a Ford dealer and have them reprogram it for you.

Have the remote start system repaired or replaced: If you’ve tried all of the above solutions and your remote start system is still not working, it’s possible that the system itself is malfunctioning. In this case, you’ll need to take your car to a Ford dealer to have the system repaired or replaced.

What are the symptoms of a bad remote start system?

There are a few symptoms that may indicate that your 2016 Ford Expedition remote start system is malfunctioning. These include:

The remote start button does not work.
The remote start system does not start the car.
The remote start system starts the car but then shuts it off again.
The remote start system starts the car but does not turn off the engine when you press the stop button.
The remote start system starts the car but does not lock the doors.

If you’re experiencing any of these symptoms, it’s possible that your remote start system is malfunctioning and needs to be repaired or replaced.

How much does it cost to fix a 2016 Ford Expedition remote start?

The cost of repairing or replacing a 2016 Ford Expedition remote start system will vary depending on the specific problem. The average cost of a remote start system repair is between $100 and $200. However, if the remote start system needs to be replaced, the cost can be as high as $500 or more.

Can I install a remote start system on my 2016 Ford Expedition myself?

It is possible to install a remote start system on your 2016 Ford Expedition yourself, but it is not recommended. The installation process is complex and requires specialized tools and knowledge. If you are not comfortable working on your car, it is best to have the remote start system installed by a qualified technician.

Here are some additional resources that you may find helpful:

[Ford Expedition Remote Start System](https://www.ford.com/support/how-tos/remote-start-system/)
[How to Install a Remote Start System](https://www.carid.com/articles/how-to-install-a-remote-start-system.html)
[Remote Start System Cost](