2016 Ford Focus Oil Change Guide [Answered]

The 2016 Ford Focus requires 5 quarts of 5W-20 oil and a new oil filter. The oil change interval is 5,000 miles or 6 months, whichever comes first.

So 2016 Ford Focus Oil Change Guide?

2016 Ford Focus Oil Change Guide

What you need:

New oil filter (part number 5W-20)
5 quarts of new oil (part number 5W-20)
Oil drain pan
Funnel
Wrench
Rags

Steps:

1. Park your car on a level surface and turn off the engine. Allow the engine to cool down for a few minutes.
2. Locate the oil drain plug under the car. It is usually near the bottom of the oil pan.
3. Place the oil drain pan under the oil drain plug.
4. Use the wrench to loosen the oil drain plug. Allow all of the oil to drain out of the pan.
5. Retighten the oil drain plug.
6. Locate the oil filter on top of the engine. It is usually near the front of the engine.
7. Use the wrench to loosen the oil filter. Be careful not to spill any oil.
8. Apply a thin coat of new oil to the gasket of the new oil filter.
9. Screw on the new oil filter by hand until it is snug. Do not overtighten the oil filter.
10. Add 5 quarts of new oil to the engine. Use the dipstick to check the oil level. The oil level should be between the full and add marks on the dipstick.
11. Start the engine and let it run for a few minutes.
12. Turn off the engine and check for leaks.

2016 Ford Focus Oil Change Guide

When to Change Your Oil

The 2016 Ford Focus requires an oil change every 5,000 miles or 6 months, whichever comes first. However, if you drive in severe conditions, such as stop-and-go traffic or dusty roads, you may need to change your oil more often.

What Type of Oil Do I Need?

The 2016 Ford Focus requires 5W-20 synthetic oil. You can find this type of oil at most auto parts stores.

How to Change Your Oil

Changing your oil is a relatively simple task that you can do yourself. Here are the steps involved:

1. Park your car on a level surface and turn off the engine.
2. Engage the parking brake.
3. Locate the oil drain plug under the car.
4. Place a drain pan under the oil drain plug.
5. Use a wrench to loosen the oil drain plug.
6. Allow all of the oil to drain out of the engine.
7. Replace the oil drain plug and tighten it securely.
8. Locate the oil filler cap on the top of the engine.
9. Remove the oil filler cap.
10. Add 5 quarts of 5W-20 synthetic oil to the engine.
11. Replace the oil filler cap.
12. Start the engine and let it run for a few minutes.
13. Check the oil level on the dipstick. The oil level should be between the full and add marks.
14. If the oil level is low, add more oil until it reaches the full mark.

Tips for Changing Your Oil

Here are a few tips for changing your oil:

Use a high-quality oil filter. A good oil filter will help to keep your engine clean and running smoothly.
Make sure to dispose of the old oil and filter properly. Used oil can be harmful to the environment, so it’s important to recycle it or dispose of it at a hazardous waste facility.
Check your oil level regularly and add oil as needed. Keeping your oil level topped off will help to protect your engine from damage.

Conclusion

Changing your oil is an important part of maintaining your 2016 Ford Focus. By following these steps, you can easily change your oil and keep your car running smoothly.

Also Read: What Does The Gem Module Control On A 97 F150

2016 Ford Focus Oil Change Guide

How often should I change the oil in my 2016 Ford Focus?

Every 5,000 miles or 6 months, whichever comes first.

What type of oil do I need for my 2016 Ford Focus?

You will need 5W-20 synthetic oil.

How much oil do I need to change the oil in my 2016 Ford Focus?

You will need 4 quarts of oil.

Where can I get my oil changed for my 2016 Ford Focus?

You can get your oil changed at any local auto parts store or dealership.

What are the steps involved in changing the oil in my 2016 Ford Focus?

1. Park your vehicle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Engage the parking brake.
4. Locate the oil drain plug under the vehicle.
5. Place a drain pan under the oil drain plug.
6. Use a wrench to loosen the oil drain plug.
7. Allow all of the oil to drain out of the oil pan.
8. Replace the oil drain plug and tighten it securely.
9. Locate the oil filter on the engine.
10. Use an oil filter wrench to loosen the oil filter.
11. Apply a thin coat of new oil to the gasket of the new oil filter.
12. Screw on the new oil filter until it is snug.
13. Add new oil to the engine until the oil level reaches the full mark on the dipstick.
14. Start the engine and let it run for a few minutes.
15. Turn off the engine and check for any leaks.