How to clear engine light code
1. Turn the ignition to the ON position (II) without starting the engine.
2. Press and hold the gas pedal and the brake pedal at the same time.
3. While holding the pedals down, turn the ignition to the OFF position (0).
4. Release the pedals and wait 5 seconds.
5. Turn the ignition to the ON position (II) and start the engine.
How to clear a permanent engine code
1. Turn the ignition to the on position (without starting the engine).
2. Press and hold the gas pedal and the brake pedal at the same time.
3. While holding the pedals down, turn the ignition off and then back on.
4. Release the pedals.
5. The code should now be cleared.
The 8th character of a VIN identifies the engine code.
The engine code for a vehicle is typically found on a sticker located under the hood. The VIN number is also located on this sticker, but the engine code is a separate set of alphanumeric characters. The engine code is typically 5 or 6 characters long, and it may include letters or numbers.
The 8th and 9th characters in a VIN represent the engine code.
The 17th character of the VIN (Vehicle Identification Number) is the engine code.
The 8th, 9th, and 10th characters of a VIN represent the engine code.
The BMW engine code is located on a sticker on the front of the engine block.
Engine code readers can be plugged into the OBD-II port, which is located under the steering wheel on most vehicles.
No, a code reader cannot turn off the check engine light, but it can help you identify the problem.