Your Ford Expedition’s Blower Motor Isn’t Working? Here’s What to Do

Do you have a Ford Expedition with a blower motor that isn’t working You’re not alone. This is a common problem, and it can be incredibly frustrating. But don’t worry, there’s a good chance you can fix it yourself. In this guide, I’ll walk you through the steps to troubleshoot and repair a Ford Expedition blower motor. I’ll also provide some tips on how to prevent this problem from happening again. So if your blower motor is on the fritz, read on!

Reasons Why Ford Expedition Blower Motor Not Working

Here are the reasons:

Blower Motor Fuse

The blower motor fuse is a 15-amp fuse located in the under-hood fuse box. If the fuse is blown, the blower motor will not work. To check the fuse, remove it from the fuse box and use a multimeter to test for continuity. If the fuse is blown, replace it with a new one.

Blower Motor Relay

The blower motor relay is a small, cylindrical device located in the under-hood fuse box. If the relay is faulty, the blower motor will not work. To check the relay, remove it from the fuse box and use a multimeter to test for continuity. If the relay is faulty, replace it with a new one.

Blower Motor Control Circuit

The blower motor control circuit is a series of wires that runs from the blower motor switch to the blower motor. If there is a break in the circuit, the blower motor will not work. To check the circuit, use a multimeter to test for continuity between the blower motor switch and the blower motor. If there is a break in the circuit, repair or replace the damaged wire.

Blower Motor

The blower motor is a small electric motor that is responsible for blowing air through the vents in the vehicle. If the blower motor is faulty, it will not work. To check the blower motor, disconnect the electrical connector and use a multimeter to test for continuity between the two terminals. If the blower motor is faulty, replace it with a new one.

How to Troubleshoot: Ford Expedition Blower Motor Not Working

Symptoms of a Blower Motor Problem

There are a few different symptoms that can indicate that your Ford Expedition blower motor is not working properly. These include:

No air blowing from the vents:
This is the most obvious symptom, and it means that the blower motor is not turning on at all.

Weak or intermittent airflow:
If the blower motor is turning on, but the airflow is weak or intermittent, this could be a sign that the motor is not working properly.

A strange noise coming from the vents:
This could be a sign that the blower motor is bearing is failing.

A burning smell coming from the vents:
This could be a sign that the blower motor is overheating.

How to Troubleshoot a Blower Motor Problem

To troubleshoot a blower motor problem, you will need to:

1. Locate the blower motor:
The blower motor is located under the dashboard, on the passenger side of the vehicle.

2. Disconnect the electrical connector to the blower motor:
This will allow you to test the motor without having to worry about damaging it.3. Use a multimeter to test the blower motor:
Set the multimeter to the ohms setting and connect the leads to the terminals on the blower motor. If the motor is working properly, you should see a reading of between 0 and 5 ohms.

4. Replace the blower motor if it is not working properly:
If the blower motor is not working properly, you will need to replace it. You can purchase a replacement blower motor from your local auto parts store.

How to Replace a Blower Motor

To replace a blower motor, you will need:

A new blower motor
A Phillips head screwdriver
A Torx head screwdriver
A set of pliers

1. Locate the blower motor:
The blower motor is located under the dashboard, on the passenger side of the vehicle.

2. Disconnect the electrical connector to the blower motor:
This will allow you to remove the motor without having to worry about damaging it.3. Remove the screws that hold the blower motor in place:
There will be two Phillips head screws and two Torx head screws.

4. Remove the blower motor:
Carefully remove the blower motor from the vehicle.

5. Install the new blower motor:
Reverse the steps above to install the new blower motor.

6. Reconnect the electrical connector to the blower motor:
Make sure that the connector is securely connected to the motor.

7. Test the blower motor:
Turn on the ignition and turn the blower motor on. You should hear the motor turn on and the air should start blowing out of the vents.

Preventative Maintenance

You can help prevent blower motor problems by:

Keeping the interior of your vehicle clean. Dust and dirt can build up on the blower motor and cause it to overheat.
Having your vehicle serviced regularly. A qualified technician can inspect the blower motor and identify any potential problems.
Replacing the blower motor when it starts to show signs of wear and tear. Replacing the blower motor before it fails can help to prevent more serious problems from occurring.

By following these tips, you can help to keep your Ford Expedition’s blower motor working properly for years to come.

Also Read: Ford Expedition Bluetooth Not Working

FAQs: Ford Expedition Blower Motor Not Working

Why is my Ford Expedition blower motor not working?

There are a few possible reasons why your Ford Expedition blower motor may not be working. These include:

A blown fuse: The blower motor fuse is located in the fuse box under the hood. Check the fuse to make sure it is not blown. If it is blown, replace it with a new fuse of the same amperage.

A bad blower motor resistor: The blower motor resistor controls the speed of the blower motor. If the resistor is bad, it can cause the blower motor to not work at all or to only work on certain speeds. The blower motor resistor is located under the dashboard. To check the resistor, you will need to remove it from the vehicle. Once the resistor is removed, you can test it with a multimeter to see if it is bad.

A bad blower motor: The blower motor itself may be bad. To test the blower motor, you will need to remove it from the vehicle. Once the blower motor is removed, you can test it with a multimeter to see if it is bad.

A wiring problem: There may be a problem with the wiring to the blower motor. To check the wiring, you will need to trace the wiring from the fuse box to the blower motor. Once you have traced the wiring, you can look for any damaged or corroded wires.

How do I fix a blower motor in a Ford Expedition?

To fix a blower motor in a Ford Expedition, you will need to:

1. Locate the blower motor: The blower motor is located under the dashboard.
2. Remove the blower motor: To remove the blower motor, you will need to disconnect the electrical connectors and the air duct.
3. Test the blower motor: You can test the blower motor with a multimeter to see if it is bad.
4. Replace the blower motor: If the blower motor is bad, you will need to replace it with a new blower motor.
5. Reinstall the blower motor: Once you have replaced the blower motor, you will need to reinstall it in the vehicle.

How much does it cost to fix a blower motor in a Ford Expedition?

The cost of fixing a blower motor in a Ford Expedition will vary depending on the type of blower motor that needs to be replaced and the labor costs involved. The average cost to replace a blower motor in a Ford Expedition is between $100 and $200.

Can I drive my Ford Expedition without a blower motor?

You can drive your Ford Expedition without a blower motor, but it is not recommended. Without a blower motor, you will not have any heat or air conditioning in your vehicle. This can be dangerous in hot or cold weather. If you must drive your Ford Expedition without a blower motor, be sure to drive slowly and carefully.

What are the symptoms of a bad blower motor in a Ford Expedition?

The symptoms of a bad blower motor in a Ford Expedition may include:

The blower motor does not work at all.
The blower motor only works on certain speeds.
The blower motor makes a loud noise.
The blower motor smells like burning plastic.