Your Ford Expedition’s Heated Seats Aren’t Working? Here’s Why!

Do your Ford Expedition’s heated seats not work You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself.

In this guide, I’ll walk you through the steps to troubleshoot the issue and get your heated seats working again. I’ll also provide some tips on how to prevent this problem from happening in the future.

So if your Ford Expedition’s heated seats aren’t working, read on for help!

Reasons Why Ford Expedition Heated Seats Not Working

Here are the reasons:

Blown Fuse

A common cause of heated seat failure is a blown fuse. The heated seat system has a dedicated fuse
and if it’s blown
the seats won’t heat up.

Heating Element Failure

The heating elements in the seats can fail over time
leading to a loss of heat. This can be due to wear and tear or a manufacturing defect.

Faulty Temperature Control Module

The temperature control module regulates the heat output in the seats. If it malfunctions
the heated seats may not work properly.

Wiring Issues

Faulty or damaged wiring can disrupt the flow of electricity to the heated seats
causing them to malfunction. It’s essential to check the wiring for any signs of damage or corrosion.

Seat Switch Malfunction

The seat heating controls or switches can fail
preventing the system from activating. This can be due to wear
damage
or electrical issues within the switch.

How to Troubleshoot: Ford Expedition Heated Seats Not Working

Your Ford Expedition’s heated seats are a great way to stay warm on those cold winter days. But what happens when they stop working? Don’t worry, you can usually fix the problem yourself with a few simple steps.

In this article, we’ll show you how to troubleshoot a Ford Expedition with heated seats that are not working. We’ll cover everything from checking the fuses to replacing the seat heater elements.

Step 1: Check the fuses

The first thing you should do is check the fuses for the heated seats. The fuses are located in the fuse box under the hood.

To access the fuse box, open the hood and locate the fuse panel. The fuse panel is usually located on the driver’s side of the engine compartment.

Once you’ve located the fuse panel, look for the fuses that are labeled Heated Seats or Seat Heaters. There will be two fuses, one for the driver’s seat and one for the passenger seat.

Check the fuses to make sure they are not blown. If a fuse is blown, replace it with a new fuse of the same amperage.

Step 2: Check the wiring

If the fuses are not blown, the next step is to check the wiring for the heated seats.

The wiring for the heated seats is located under the seats. To access the wiring, you’ll need to remove the seats.

Once you’ve removed the seats, you can inspect the wiring for any damage. Look for broken wires, loose connections, or corrosion.

If you find any damage, repair the wiring as needed.

Step 3: Replace the seat heater elements

If you’ve checked the fuses and wiring and the heated seats still aren’t working, the next step is to replace the seat heater elements.

The seat heater elements are located in the seats. To access the seat heater elements, you’ll need to remove the seats.

Once you’ve removed the seats, you can remove the seat heater elements. The seat heater elements are usually held in place with clips.

Once you’ve removed the seat heater elements, you can install new ones. Make sure the new seat heater elements are the same size and type as the old ones.

Conclusion

By following these steps, you can usually troubleshoot a Ford Expedition with heated seats that are not working. If you’re not comfortable working on your vehicle, you can always take it to a qualified mechanic.

Also Read: Ford Expedition Heater Not Working

FAQs: Ford Expedition Heated Seats Not Working

Why aren’t my Ford Expedition heated seats working?

There are a few possible reasons why your Ford Expedition heated seats might not be working.

The seats may not be turned on: Make sure that the heated seat switch is turned to the On position.

The seats may not be receiving power: Check the fuse box to make sure that the fuse for the heated seats is not blown.

The heated seat elements may be damaged: If the heated seat elements are damaged, they will need to be replaced.

The wiring to the heated seats may be damaged: If the wiring to the heated seats is damaged, it will need to be repaired or replaced.

How do I turn on the heated seats in my Ford Expedition?

To turn on the heated seats in your Ford Expedition, follow these steps:

1. Press the On button on the heated seat switch.
2. Use the up and down arrows on the switch to select the desired seat temperature.
3. Press the On button again to turn on the heated seats.

How do I know if my Ford Expedition heated seats are working?

You can tell if your Ford Expedition heated seats are working by feeling the seats. If the seats are warm, then the heated seats are working.

You can also check the heated seat indicator light on the dashboard. If the light is on, then the heated seats are working.

How do I fix my Ford Expedition heated seats that are not working?

If your Ford Expedition heated seats are not working, you can try to fix them yourself or take them to a mechanic.

To fix the heated seats yourself, you will need to:

1. Locate the fuse box.
2. Find the fuse for the heated seats.
3. Check the fuse to make sure that it is not blown.
4. If the fuse is blown, replace it with a new fuse.
5. Reconnect the wiring to the heated seats.
6. Turn on the heated seats and test them to make sure that they are working.

If you are not comfortable fixing the heated seats yourself, you can take your vehicle to a mechanic. The mechanic will be able to diagnose the problem and fix the heated seats.

How much does it cost to fix Ford Expedition heated seats that are not working?

The cost of fixing Ford Expedition heated seats that are not working will vary depending on the cause of the problem.

If the problem is a blown fuse, the cost to fix it will be around $5.

If the problem is a damaged heated seat element, the cost to replace it will be around $100.

If the problem is damaged wiring, the cost to repair or replace it will vary depending on the extent of the damage.

Overall, the cost of fixing Ford Expedition heated seats that are not working can range from $5 to $100.