Your Ford Expedition Key Fob Isn’t Working? Here’s How to Fix It!

Your Ford Expedition key fob is an essential part of your vehicle, allowing you to lock and unlock the doors, open the trunk, and start the engine. But what happens when your key fob stops working It can be a major inconvenience, causing you to be late for work or appointments. In this guide, we’ll troubleshoot the common issue of a . We’ll cover everything from simple fixes like replacing the battery to more complex issues like replacing the key fob itself. By the end of this guide, you’ll be able to get your key fob working again so you can get back to your busy life.

Reasons Why Ford Expedition Key Fob Not Working

Here are the reasons:

Dead Battery

The most common reason for a Ford Expedition key fob not working is a dead battery. The key fob battery is a small, round, flat battery that is located in the back of the key fob. To check the battery, you can remove the key fob cover and look for a small, round, flat battery. If the battery is corroded or has a low voltage, it will need to be replaced.

Faulty Key Fob

If the battery in the key fob is not the problem, the key fob itself may be faulty. To test the key fob, you can try to lock and unlock the doors with the key fob. If the key fob does not work, it will need to be replaced.

Interference

Another possible cause of a Ford Expedition key fob not working is interference from other electronic devices. This can be caused by devices such as cell phones, radios, or other key fobs. To test for interference, try moving the key fob away from other electronic devices and see if it starts working again.

Software Problems

In some cases, a Ford Expedition key fob may not work due to software problems. This can be caused by a software update or a problem with the vehicle’s computer. To fix this problem, you will need to take your vehicle to a Ford dealership and have the software updated.

How to Troubleshoot: Ford Expedition Key Fob Not Working

Your Ford Expedition key fob is an essential part of your vehicle. It allows you to lock and unlock the doors, open the trunk, and start the engine. If your key fob stops working, it can be a major inconvenience. There are a few things you can check to troubleshoot the problem and get your key fob working again.

Possible Causes

There are a few different things that could cause your Ford Expedition key fob to stop working. Here are some of the most common causes:

Dead battery:

The most common cause of a key fob not working is a dead battery. The battery in your key fob is a small, round, button cell battery. It’s usually located on the back of the key fob. To check the battery, you can use a voltmeter or a flashlight. If the battery is dead, you can replace it with a new one.

Damaged key fob:

If your key fob has been dropped or damaged, it could be damaged. This could prevent the key fob from communicating with your vehicle. To check for damage, look for cracks or breaks in the key fob. If you find any damage, you can try replacing the key fob.

Interference:

There are a few things that can cause interference with your key fob. This includes other electronic devices, such as cell phones and radios. It can also include metal objects, such as keys or coins. If you think there is interference, try moving your key fob away from other electronic devices or metal objects.

Software problem:

There could be a software problem with your vehicle’s computer. This could prevent the vehicle from recognizing your key fob. To check for a software problem, you can take your vehicle to a dealership or a qualified mechanic.

Troubleshooting Steps

Here are some steps you can take to troubleshoot the problem with your Ford Expedition key fob:

1. Check the battery:

The first thing you should do is check the battery in your key fob. If the battery is dead, you can replace it with a new one.

2. Inspect the key fob:

Next, you should inspect the key fob for damage. Look for cracks or breaks in the key fob. If you find any damage, you can try replacing the key fob.3. Move the key fob away from other electronic devices:

If you think there is interference with your key fob, try moving it away from other electronic devices. This includes cell phones, radios, and other key fobs.

4. Take your vehicle to a dealership or a qualified mechanic:

If you have tried all of the above steps and your key fob is still not working, you can take your vehicle to a dealership or a qualified mechanic. They can check for a software problem or other issues.

Prevention

There are a few things you can do to prevent your Ford Expedition key fob from stopping working:

Replace the battery regularly:

The battery in your key fob should be replaced every two to three years. This will help to ensure that the battery doesn’t die unexpectedly.

Be careful not to damage the key fob:

Avoid dropping or damaging your key fob. This could prevent the key fob from working properly.

Keep the key fob away from other electronic devices:

Keep your key fob away from other electronic devices, such as cell phones and radios. This will help to prevent interference.

Conclusion

Your Ford Expedition key fob is an essential part of your vehicle. If your key fob stops working, it can be a major inconvenience. There are a few things you can check to troubleshoot the problem and get your key fob working again. If you have tried all of the above steps and your key fob is still not working, you can take your vehicle to a dealership or a qualified mechanic.

Also Read: Ford Expedition Key Won’T Turn

FAQs: Ford Expedition Key Fob Not Working

Why is my Ford Expedition key fob not working?

There are a few reasons why your Ford Expedition key fob may not be working. Here are some of the most common causes:

The battery is dead: The most common reason for a key fob to stop working is a dead battery. To check the battery, look for a small, round, metal button on the back of the key fob. If the button is sunken in, the battery is probably dead and needs to be replaced.

The key fob is damaged: If the key fob is dropped or damaged, it may stop working. If you think the key fob is damaged, you can try replacing it.

The key fob is out of range: The key fob communicates with your car using a radio signal. If you’re too far away from your car, the key fob may not work. Try moving closer to your car and see if that fixes the problem.

The car’s receiver is not working: The car’s receiver is the part of the car that receives the signal from the key fob. If the receiver is not working, the key fob will not work. If you think the receiver is not working, you can take your car to a dealer or a qualified mechanic to have it checked.

How do I fix a Ford Expedition key fob that is not working?

If your Ford Expedition key fob is not working, you can try the following solutions:

Replace the battery: If the battery is dead, replacing it will usually fix the problem. You can find replacement batteries at most auto parts stores.

Reset the key fob: If the key fob is damaged or out of range, you can try resetting it. To reset the key fob, follow the instructions in your owner’s manual.

Take your car to a dealer or a qualified mechanic: If you think the problem is with the car’s receiver, you can take your car to a dealer or a qualified mechanic to have it checked.

How do I program a new Ford Expedition key fob?

To program a new Ford Expedition key fob, you will need the following:

The new key fob
The old key fob
The vehicle’s owner’s manual

To program the key fob, follow the instructions in your owner’s manual.

What are the symptoms of a bad Ford Expedition key fob?

There are a few symptoms that may indicate that your Ford Expedition key fob is bad. These symptoms include:

The key fob doesn’t work at all.
The key fob works intermittently.
The key fob works only when you’re close to your car.
The key fob works only when you’re facing your car.
The key fob works only when you’re pressing a certain button.

If you’re experiencing any of these symptoms, it’s possible that your key fob is bad and needs to be replaced.

How much does it cost to replace a Ford Expedition key fob?

The cost of replacing a Ford Expedition key fob varies depending on the type of key fob you need. A basic key fob can cost around $50, while a more advanced key fob with features like remote start can cost around $100. You can find replacement key fobs at most auto parts stores.