Your Ford Expedition Liftgate Won’t Open? Here’s How to Fix It!
Your You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there are a few simple troubleshooting steps you can take to fix the problem.
In this guide, I’ll walk you through the process of diagnosing and fixing a Ford Expedition liftgate that won’t open. I’ll also provide some tips on how to prevent this problem from happening in the future.
So if your liftgate is stuck, don’t despair. Just follow these steps and you’ll be back on the road in no time.
Reasons Why Ford Expedition Liftgate Won’T Open
Here are the reasons:
Electrical Problems
Faulty liftgate actuator
Faulty liftgate wiring
Faulty liftgate control module
Faulty body control module
Mechanical Problems
Jammed liftgate latch
Broken liftgate cable
Broken liftgate strut
Damaged liftgate hinges
How to Troubleshoot: Ford Expedition Liftgate Won’t Open
The liftgate on your Ford Expedition is a convenient feature that allows you to easily load and unload cargo. However, if the liftgate won’t open, it can be a major inconvenience. There are a few things you can check to troubleshoot the problem and get the liftgate working again.
Possible Causes
There are a few different things that could cause the liftgate on your Ford Expedition to stop working. Here are some of the most common causes:
A faulty liftgate switch:
The liftgate switch is responsible for sending a signal to the liftgate motor to open and close. If the switch is faulty, it may not be sending the correct signal, which could prevent the liftgate from opening.
A faulty liftgate motor:
The liftgate motor is responsible for actually opening and closing the liftgate. If the motor is faulty, it may not be able to move the liftgate properly.
A faulty liftgate wiring harness:
The liftgate wiring harness connects the liftgate switch and motor to the vehicle’s electrical system. If the wiring harness is damaged or corroded, it may not be able to properly transmit signals between the switch and motor.
A faulty liftgate control module:
The liftgate control module is responsible for coordinating the operation of the liftgate switch, motor, and wiring harness. If the control module is faulty, it may not be able to properly control the liftgate.
Troubleshooting Steps
To troubleshoot the problem with your Ford Expedition’s liftgate, you will need to perform a series of steps. Here are the steps to troubleshoot a liftgate that won’t open:
1. Inspect the liftgate switch:
First, you will need to inspect the liftgate switch to see if it is faulty. To do this, locate the liftgate switch on the inside of the liftgate. The switch is usually a small, black button. Press the button and see if the liftgate motor engages. If the liftgate motor does not engage, the switch is likely faulty.
2. Inspect the liftgate motor:
If the liftgate switch is not faulty, you will need to inspect the liftgate motor. To do this, locate the liftgate motor on the inside of the liftgate. The motor is usually a small, black box. Disconnect the electrical connector from the motor. Use a multimeter to check the resistance of the motor windings. If the resistance is infinite, the motor is likely faulty.3. Inspect the liftgate wiring harness:
If the liftgate switch and motor are not faulty, you will need to inspect the liftgate wiring harness. To do this, locate the liftgate wiring harness on the inside of the liftgate. The wiring harness is usually a black, plastic tube. Inspect the wiring harness for damage or corrosion. If the wiring harness is damaged or corroded, it will need to be replaced.
4. Inspect the liftgate control module:
If the liftgate switch, motor, and wiring harness are not faulty, you will need to inspect the liftgate control module. To do this, locate the liftgate control module on the inside of the liftgate. The control module is usually a small, black box. Disconnect the electrical connector from the control module. Use a multimeter to check the voltage at the control module connector. If the voltage is not present, the control module is likely faulty.
Replacing Parts
If you determine that a part is faulty, you will need to replace it. Here are the steps to replace a faulty liftgate switch, motor, or wiring harness:
1. Disconnect the battery:
Before you begin any repairs, you will need to disconnect the battery to prevent any electrical shorts.
2. Remove the old part:
To remove the old part, you will need to remove the screws or clips that hold it in place.3. Install the new part:
To install the new part, you will need to reverse the steps you took to remove the old part.
4. Reconnect the battery:
Once the new part is installed, you can reconnect the battery.
Conclusion
By following these steps, you can troubleshoot and repair a liftgate that won’t open on your Ford Expedition. If you are unable to fix the problem yourself, you can take your vehicle to a qualified auto repair shop.
Also Read: Ford Expedition Power Folding Mirrors Not Working
FAQs: Ford Expedition Liftgate Won’t Open
Why won’t my Ford Expedition liftgate open?
There are a few possible reasons why your Ford Expedition liftgate won’t open. Here are some of the most common:
The liftgate is stuck: This can happen if the liftgate is frozen, if there is something blocking it, or if the liftgate motor is not working properly.
The liftgate is not unlocked: Make sure that the liftgate is unlocked before you try to open it.
The liftgate is in the wrong position: The liftgate may not open if it is not in the correct position. Make sure that the liftgate is fully closed before you try to open it.
The liftgate is damaged: If the liftgate is damaged, it may not open properly. You may need to have the liftgate repaired or replaced.
How do I fix a stuck Ford Expedition liftgate?
If your Ford Expedition liftgate is stuck, there are a few things you can try to fix it. Here are some steps:
1. Check to see if the liftgate is frozen: If the liftgate is frozen, you can try to thaw it with a hair dryer or by pouring warm water over it.
2. Check to see if there is anything blocking the liftgate: If there is something blocking the liftgate, you can try to remove it.
3. Check to see if the liftgate motor is working properly: You can do this by trying to open the liftgate with the key fob or by using the interior button. If the liftgate motor does not work, you may need to have it repaired or replaced.
4. Try to manually open the liftgate: If you can manually open the liftgate, you may need to have the liftgate linkage adjusted.
How do I unlock a Ford Expedition liftgate?
To unlock a Ford Expedition liftgate, you can use the key fob or the interior button. Here are the steps:
1. With the key fob in your hand, press the lock button twice: The liftgate will unlock and you will hear a chime.
2. Press the interior button on the liftgate: The liftgate will unlock and you will hear a chime.
How do I open a Ford Expedition liftgate in the wrong position?
If your Ford Expedition liftgate is in the wrong position, you can try to open it by following these steps:
1. Press the interior button on the liftgate: The liftgate will move slightly and you will hear a chime.
2. Press the interior button again: The liftgate will open fully and you will hear a chime.
How do I fix a damaged Ford Expedition liftgate?
If your Ford Expedition liftgate is damaged, you may need to have it repaired or replaced. Here are some things to consider when deciding whether to repair or replace the liftgate:
The cost of repair vs. replacement: The cost of repairing a liftgate can vary depending on the severity of the damage. The cost of replacing a liftgate can also vary depending on the make and model of your vehicle.
The availability of replacement parts: If you need to replace your liftgate, you will need to make sure that you can find a replacement part that is compatible with your vehicle.
The amount of time it will take to repair or replace the liftgate: Repairing a liftgate can take several hours, while replacing a liftgate can take several days.
Once you have considered these factors, you can decide whether to repair or replace your Ford Expedition liftgate.