Your Ford Expedition Power Liftgate Won’t Close? Here’s Why!

There’s nothing more frustrating than trying to close your Ford Expedition’s power liftgate, only to have it fail to cooperate. Not only is it an inconvenience, but it can also be dangerous if you’re trying to load or unload cargo. If your Expedition’s power liftgate won’t close, there are a few things you can check to try to fix the problem. In this guide, we’ll walk you through the steps to troubleshoot the issue and get your liftgate working properly again.

We understand how frustrating this issue can be, so we’ll do our best to make the troubleshooting process as quick and easy as possible. With a little time and effort, you’ll be back to using your Expedition’s power liftgate in no time.

Reasons Why Ford Expedition Power Liftgate Won’T Close

Here are the reasons:

1. Faulty Liftgate Motor

The liftgate motor is responsible for powering the liftgate up and down. If the motor is faulty, it will not be able to move the liftgate and it will remain stuck in the open position.

2. Faulty Liftgate Switch

The liftgate switch is responsible for sending a signal to the liftgate motor to open or close the liftgate. If the switch is faulty, it will not be able to send the signal to the motor and the liftgate will not be able to move.

3. Faulty Liftgate Wiring

The liftgate wiring is responsible for sending power to the liftgate motor and switch. If the wiring is damaged, it will not be able to provide power to the motor and switch and the liftgate will not be able to move.

4. Faulty Liftgate Door Latch

The liftgate door latch is responsible for holding the liftgate closed. If the latch is faulty, it will not be able to hold the liftgate closed and it will pop open.

5. Obstructed Liftgate Mechanism

The liftgate mechanism can become obstructed by debris, snow, or ice. If the mechanism is obstructed, it will not be able to move the liftgate and it will remain stuck in the open position.

How to Troubleshoot: Ford Expedition Power Liftgate Won’t Close

1. Check Power Supply

If your Ford Expedition power liftgate won’t close
the first step is to check the power supply to the liftgate. Use a multimeter to test the voltage at the liftgate motor. Ensure that the power supply is within the manufacturer’s specified range. If the voltage is too low
it could indicate a problem with the power supply or wiring.

2. Inspect Liftgate Motor

Next
inspect the liftgate motor for any signs of damage or malfunction. Look for any visible damage to the motor or its wiring. Additionally
listen for any unusual noises when attempting to close the liftgate. If the motor appears to be damaged or is making unusual noises
it may need to be replaced.

3. Check Liftgate Control Module

The liftgate control module is responsible for controlling the operation of the power liftgate. Use a diagnostic scan tool to check for any fault codes related to the liftgate control module. If any fault codes are present
follow the manufacturer’s diagnostic procedures to identify and repair the issue.

4. Verify Liftgate Alignment

Improper liftgate alignment can cause the power liftgate to malfunction. Inspect the liftgate hinges
latch
and alignment to ensure that they are properly aligned. Misaligned components can prevent the liftgate from closing properly.

5. Reset Liftgate System

In some cases
a simple reset of the liftgate system can resolve the issue. Refer to the vehicle’s owner’s manual for the specific reset procedure for the power liftgate. This may involve manually closing the liftgate and resetting the liftgate control module.

6. Seek Professional Assistance

If the above troubleshooting steps do not resolve the issue
it is advisable to seek professional assistance from a qualified automotive technician. They will have the expertise and diagnostic tools necessary to identify and rectify the problem with the Ford Expedition power liftgate.
By following these troubleshooting steps
you can effectively diagnose and address the issue of a Ford Expedition power liftgate that won’t close.

Also Read: Ford Expedition Power Outlet Not Working

FAQs: Ford Expedition Power Liftgate Won’t Close

Why won’t my Ford Expedition power liftgate close?

There are a few possible reasons why your Ford Expedition power liftgate won’t close. Here are some of the most common:

The liftgate is obstructed: Make sure that there is nothing blocking the liftgate from closing, such as a bag or a child’s toy.

The liftgate is out of alignment: The liftgate may be out of alignment if it was hit by something or if it was not installed correctly.

The liftgate motor is faulty: The liftgate motor may be faulty if it is not working properly or if it is making a strange noise.

The liftgate control switch is faulty: The liftgate control switch may be faulty if it is not working properly or if it is making a strange noise.

How can I fix my Ford Expedition power liftgate?

If your Ford Expedition power liftgate won’t close, you can try the following solutions:

Check for obstructions: Make sure that there is nothing blocking the liftgate from closing.

Try resetting the liftgate: To reset the liftgate, press and hold the liftgate control switch for 10 seconds.

Have the liftgate inspected by a qualified technician: If you are unable to fix the liftgate yourself, you should have it inspected by a qualified technician.

What are the safety risks of a Ford Expedition power liftgate that won’t close?

There are a few safety risks associated with a Ford Expedition power liftgate that won’t close. Here are some of the most common:

The liftgate could open while the vehicle is in motion: This could cause the driver to lose control of the vehicle.

The liftgate could fall on someone while it is open: This could cause serious injury or death.

The liftgate could become stuck in the open position: This could prevent the driver from getting in or out of the vehicle.

What should I do if my Ford Expedition power liftgate won’t close?

If your Ford Expedition power liftgate won’t close, you should take the following steps:

Pull over to the side of the road in a safe location:

Turn off the engine and get out of the vehicle:

Check for obstructions: Make sure that there is nothing blocking the liftgate from closing.

Try resetting the liftgate: To reset the liftgate, press and hold the liftgate control switch for 10 seconds.

If the liftgate still won’t close, have it inspected by a qualified technician:

How much does it cost to fix a Ford Expedition power liftgate?

The cost of fixing a Ford Expedition power liftgate will vary depending on the cause of the problem. Here are some of the factors that may affect the cost:

The type of problem: The cost of fixing a power liftgate that is out of alignment will be different than the cost of fixing a power liftgate that has a faulty motor.

The location of the problem: The cost of fixing a power liftgate that is located in the front of the vehicle will be different than the cost of fixing a power liftgate that is located in the rear of the vehicle.

The labor costs: The labor costs will vary depending on the skill level of the technician who is performing the repairs.

Generally speaking, the cost of fixing a Ford Expedition power liftgate will range from $100 to $500. However, the cost could be higher if the problem is more serious.