Your Ford Expedition Running Boards Are Not Working? Here’s Why!

If your Ford Expedition’s running boards aren’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself with a little troubleshooting.

In this guide, I’ll walk you through the steps to diagnose and fix the problem. I’ll also provide some tips on how to prevent it from happening again. So if you’re ready to get your running boards working again, let’s get started!

Reasons Why Ford Expedition Running Boards Not Working

Here are the reasons:

1. Faulty Motor

The running boards may not be working due to a faulty motor
which can prevent the boards from extending or retracting properly.

2. Wiring Issues

Wiring problems
such as damaged or disconnected wiring
can also cause the running boards to malfunction.

3. Control Module Malfunction

A malfunctioning control module can disrupt the operation of the running boards
leading to issues with their functionality.

4. Fuse Problems

Issues with the fuses related to the running boards can also result in their failure to operate correctly.

How to Troubleshoot: Ford Expedition Running Boards Not Working

Your Ford Expedition’s running boards are an important safety feature, providing a convenient way to get in and out of the vehicle, especially when it’s raining or snowing. If your running boards are not working, it can be a real pain. But don’t worry, there are a few things you can check to troubleshoot the problem.

Step 1: Check the fuses

The first thing you should do is check the fuses for the running boards. The fuses are located in the fuse box under the hood. There should be a fuse labeled running boards or something similar. Remove the fuse and check to see if it is blown. If the fuse is blown, replace it with a new one.

Step 2: Check the wiring

Once you have checked the fuses, you should check the wiring for the running boards. The wiring is located under the running boards. Look for any damaged or frayed wires. If you find any damaged wires, you will need to replace them.

Step 3: Check the motor

If the wiring is in good condition, the next thing you should check is the motor. The motor is located under the running boards. You can access it by removing the running boards. Check the motor to make sure it is not damaged. If the motor is damaged, you will need to replace it.

Step 4: Check the control switch

If the motor and wiring are in good condition, the next thing you should check is the control switch. The control switch is located in the driver’s side door. Check the switch to make sure it is not damaged. If the switch is damaged, you will need to replace it.

Step 5: Reset the running boards

If you have checked all of the above and the running boards are still not working, you may need to reset them. To reset the running boards, follow these steps:

1. Turn off the ignition.
2. Press and hold the unlock button on the remote.
3. While holding the unlock button, turn the ignition on.
4. Hold the unlock button for 5 seconds.
5. Turn the ignition off.
6. Turn the ignition back on.

The running boards should now be reset. If they are still not working, you will need to take your vehicle to a qualified mechanic for further diagnosis.

Also Read: Ford Expedition Screen Not Working

FAQs: Ford Expedition Running Boards Not Working

Why aren’t my running boards working?

There are a few possible reasons why your running boards may not be working. Here are some of the most common causes:

The running boards are not properly connected to the vehicle: Make sure that the running boards are securely attached to the vehicle’s frame. If they are not, they may not be able to deploy or retract properly.

The running boards are damaged: If the running boards are damaged, they may not be able to function properly. Check for any cracks, tears, or other damage to the running boards. If they are damaged, you may need to have them repaired or replaced.

The running boards are not getting power: The running boards may not be getting power if the wiring is damaged or if the fuse has blown. Check the wiring and the fuse to make sure that they are in good condition.

The running boards are not programmed correctly: The running boards may not be programmed correctly if the vehicle’s computer has been reprogrammed or if the running boards have been replaced. You may need to have the running boards reprogrammed to make sure that they are working properly.

How do I fix my running boards?

The steps you need to take to fix your running boards will depend on the cause of the problem. Here are some general tips:

Check the connection between the running boards and the vehicle: Make sure that the running boards are securely attached to the vehicle’s frame. If they are not, you may need to tighten the bolts or screws that hold them in place.

Inspect the running boards for damage: Look for any cracks, tears, or other damage to the running boards. If they are damaged, you may need to have them repaired or replaced.

Check the wiring and the fuse: Make sure that the wiring is in good condition and that the fuse is not blown. If they are not, you may need to have them repaired or replaced.

Reprogram the running boards: If the running boards are not programmed correctly, you may need to have them reprogrammed. You can usually do this yourself by following the instructions in the owner’s manual.

How much does it cost to fix running boards?

The cost of fixing running boards will vary depending on the cause of the problem and the type of running boards you have. Here are some general cost estimates:

Replacing the wiring: $100-$200

Replacing the fuse: $5-$10

Repairing or replacing the running boards: $100-$500

Reprogramming the running boards: $50-$100

How can I prevent my running boards from breaking down?

There are a few things you can do to prevent your running boards from breaking down:

Keep the running boards clean and free of dirt and debris: Dirt and debris can build up on the running boards and cause them to rust or corrode.

Don’t overload the running boards: The running boards are not designed to support heavy loads. Overloading them can damage the running boards and make them more likely to break down.

Avoid driving over sharp objects: Sharp objects can damage the running boards, causing them to rust or corrode.

Park the vehicle carefully: When parking the vehicle, make sure that the running boards are not damaged by curbs or other objects.

What are the benefits of having running boards?

Running boards can provide a number of benefits, including:

Easy access to the vehicle: Running boards make it easier to get in and out of the vehicle, especially for people with limited mobility.

Improved safety: Running boards can help to prevent people from tripping or falling when getting in or out of the vehicle.

Added protection: Running boards can help to protect the vehicle’s body from damage, such as scratches and dents.

Aesthetic appeal: Running boards can add a stylish touch to the vehicle.