How To Program Volkswagen Key Fob: (Get Answer)

How to Program a Volkswagen Key Fob

To program a Volkswagen key fob, you will need the following:

The Volkswagen key fob
The original Volkswagen car key
The Volkswagen vehicle

1. Insert the original Volkswagen car key into the ignition and turn it to the “On” position.
2. Press and hold the “Unlock” button on the key fob for 5 seconds.
3. While still holding the “Unlock” button, turn the ignition to the “Off” position.
4. Release the “Unlock” button and remove the key from the ignition.
5. The key fob should now be programmed.

How to Program a Volkswagen Key Fob

What You Will Need

Volkswagen key fob
Volkswagen vehicle
Volkswagen dealer programming device (optional)

Steps

1. Insert the Volkswagen dealer programming device into the OBD-II port of your vehicle.
2. Turn on the ignition of your vehicle.
3. Press and hold the Unlock button on the key fob for 5 seconds.
4. The LED on the key fob will flash quickly.
5. Release the Unlock button.
6. Press the Lock button on the key fob.
7. The LED on the key fob will flash slowly.
8. Press the Unlock button on the key fob.
9. The LED on the key fob will flash quickly again.
10. The key fob has been programmed.

Troubleshooting

If you are having trouble programming your Volkswagen key fob, there are a few things you can check.

Make sure that you are using the correct Volkswagen dealer programming device.
Make sure that the ignition of your vehicle is turned on.
Make sure that you are holding the Unlock button on the key fob for the correct amount of time.
Make sure that you are pressing the Lock and Unlock buttons on the key fob in the correct order.

If you are still having trouble programming your Volkswagen key fob, you can contact your local Volkswagen dealer for assistance.

You May Also Like to Read: How Many Miles Will A Volkswagen Jetta Last

FAQs: How to Program a Volkswagen Key Fob

What is a Volkswagen key fob?

A Volkswagen key fob is a small electronic device that is used to lock, unlock, and start your Volkswagen vehicle. It also contains a panic button that can be used to sound the car alarm.

How do I program a Volkswagen key fob?

To program a Volkswagen key fob, you will need the following:

The original Volkswagen key fob
The new Volkswagen key fob
The Volkswagen vehicle
The Volkswagen owner’s manual

1. Insert the original Volkswagen key fob into the ignition and turn it to the ON position.
2. Press the lock button on the original Volkswagen key fob three times.
3. Within 10 seconds, press the lock button on the new Volkswagen key fob three times.
4. The Volkswagen vehicle will honk the horn and the lights will flash to confirm that the new key fob has been programmed.

What if I lose my Volkswagen key fob?

If you lose your Volkswagen key fob, you will need to have it replaced. You can do this by taking your Volkswagen vehicle to a Volkswagen dealer or an authorized Volkswagen repair shop.

How much does it cost to program a Volkswagen key fob?

The cost of programming a Volkswagen key fob varies depending on the model of your vehicle. The average cost is between $50 and $100.

Can I program a Volkswagen key fob myself?

Yes, you can program a Volkswagen key fob yourself. However, it is important to follow the instructions carefully to ensure that the key fob is programmed correctly. If you are not comfortable programming the key fob yourself, you can take your Volkswagen vehicle to a Volkswagen dealer or an authorized Volkswagen repair shop.