Unlock Your Tesla’s Style: Remove Hubcaps in Minutes!

To remove the hubcaps from a Tesla Model 3, you will need a flathead screwdriver.

1. Place the flathead screwdriver between the hubcap and the wheel rim.
2. Pry up on the hubcap until it pops off.
3. Repeat for the other hubcaps.

So, How To Take Hubcaps Off Tesla Model 3

To remove the hubcaps from a Tesla Model 3, you will need:

– A flathead screwdriver
– A 10mm socket wrench

1. Place the flathead screwdriver under the center cap and pry up.
2. Remove the center cap.
3. Place the 10mm socket wrench on the lug nut and turn counterclockwise until the lug nut is loose.
4. Repeat steps 3 and 4 for each lug nut.
5. Pull the hubcap off of the wheel.

How to Take Hubcaps Off Tesla Model 3

Tools Needed

10mm socket
Wrench
Penetrating oil
Rag

Steps

1. Park your Tesla Model 3 on a flat surface.
2. Turn off the car and allow it to cool down.
3. Put on your safety glasses.
4. Locate the hubcap removal tool. It is located in the trunk of your Tesla Model 3.
5. Apply penetrating oil to the hubcap bolts.
6. Wait a few minutes for the penetrating oil to work its way into the threads of the bolts.
7. Use the 10mm socket and wrench to loosen the hubcap bolts.
8. Remove the hubcap bolts.
9. Use the hubcap removal tool to pry the hubcap off of the wheel.
10. Repeat steps 5-9 for each hubcap.

Tips

If the hubcap bolts are stuck, you can apply heat to them with a hair dryer or heat gun.
Be careful not to damage the hubcap or the wheel when prying the hubcap off.
If you are unable to remove the hubcaps, you can take your Tesla Model 3 to a Tesla service center.

Also Read: How To Take Off A Tesla Tire

FAQs: How to Take Hubcaps Off Tesla Model 3

How do I remove the hubcaps on my Tesla Model 3?

To remove the hubcaps on your Tesla Model 3, follow these steps:

1. Park your car on a level surface:
2. Apply the parking brake:
3. Remove the lug nuts from the wheel using a lug wrench:
4. Place a wheel chock behind the opposite wheel to prevent the car from rolling:
5. Use a hubcap tool to pry the hubcaps off the wheels:

What tools do I need to remove the hubcaps on my Tesla Model 3?

To remove the hubcaps on your Tesla Model 3, you will need the following tools:

A lug wrench
A hubcap tool
A wheel chock

Can I remove the hubcaps on my Tesla Model 3 without a hubcap tool?

It is possible to remove the hubcaps on your Tesla Model 3 without a hubcap tool, but it is more difficult. You can use a flathead screwdriver or a pry bar to pry the hubcaps off the wheels, but you risk damaging the hubcaps or the wheels.

What happens if I drive with the hubcaps off my Tesla Model 3?

Driving with the hubcaps off your Tesla Model 3 can damage the wheels. The lug nuts are exposed to the elements and can rust, and the wheels can be damaged if they come into contact with road debris.

How can I keep my Tesla Model 3 hubcaps from coming off?

To keep your Tesla Model 3 hubcaps from coming off, you can take the following steps:

Tighten the lug nuts to the proper torque specification.
Use a wheel lock to prevent the lug nuts from being removed.
Avoid driving over potholes or other obstacles that could damage the hubcaps.