How to Remove Tesla Aero Caps Without Damaging Your Car

To remove Tesla Aero Caps
1. Place car on a level surface.
2. Remove lug nuts and wheel.
3. Pry cap off with a flathead screwdriver.
4. Replace wheel and lug nuts.

So, How To Take Off Tesla Aero Caps

To remove the Aero caps from your Tesla, follow these steps:

1. Park your car in a well-lit area.
2. Remove the lug nuts from the wheel using a lug wrench.
3. Lift the car off the ground using a jack.
4. Place a wheel chock behind the opposite wheel to prevent the car from rolling.
5. Remove the Aero cap by pulling it straight up.
6. Replace the lug nuts and lower the car.
7. Reinstall the wheel.

How to Take Off Tesla Aero Caps

What are Tesla Aero Caps?

Tesla Aero Caps are aerodynamic wheel covers that are designed to reduce drag and improve fuel efficiency. They are made of a lightweight composite material and are attached to the wheels with clips.

Why Would I Want to Take Off My Tesla Aero Caps?

There are a few reasons why you might want to take off your Tesla Aero Caps.

To improve performance:
Removing the Aero Caps can improve the performance of your Tesla by reducing drag. This can result in a slight increase in acceleration and top speed.

To improve handling:
Removing the Aero Caps can also improve the handling of your Tesla by reducing the amount of lift that is generated at high speeds. This can make your Tesla feel more stable and planted on the road.

To improve looks:
Some people simply prefer the look of a Tesla without the Aero Caps. If you are one of these people, then removing the Aero Caps is a great way to give your Tesla a more customized look.

How to Take Off Tesla Aero Caps

To take off your Tesla Aero Caps, you will need the following tools:

A flathead screwdriver
A Phillips head screwdriver

1. Park your Tesla in a safe location and set the parking brake:

2. Open the trunk and remove the spare tire cover:
3. Locate the two clips that hold the Aero Caps in place:
The clips are located on the inside of the wheel well, near the top of the wheel.

4. Use a flathead screwdriver to pry open the clips:

5. Carefully remove the Aero Caps from the wheels:

Tips for Removing Tesla Aero Caps

Be careful not to damage the Aero Caps or the wheels when removing them.
If the clips are difficult to pry open, you can use a heat gun or hair dryer to warm them up. This will make them easier to remove.
If you are unable to remove the Aero Caps yourself, you can take your Tesla to a Tesla service center and they will be able to remove them for you.

Conclusion

Taking off your Tesla Aero Caps is a relatively simple process that can be completed in a few minutes. By following the steps in this article, you can easily remove the Aero Caps and enjoy the benefits of improved performance, handling, and looks.

Also Read: How To Take Off Tesla Charger

FAQs on How to Take Off Tesla Aero Caps

How do I remove Tesla aero caps?

To remove Tesla aero caps, you will need:

A flathead screwdriver
A pair of pliers

1. Start by removing the center cap. This is usually held in place by a small Phillips head screw.
2. Once the center cap is removed, you will see two small plastic tabs on the inside of the aero cap.
3. Use the flathead screwdriver to pry up these tabs.
4. Once the tabs are pried up, you can use the pliers to grip the aero cap and pull it off.

What tools do I need to remove Tesla aero caps?

You will need a flathead screwdriver and a pair of pliers to remove Tesla aero caps.

How long does it take to remove Tesla aero caps?

It should take about 5 minutes to remove Tesla aero caps.

Can I remove Tesla aero caps without tools?

It is possible to remove Tesla aero caps without tools, but it is much more difficult. You will need to use your fingernails or a similar sharp object to pry up the tabs on the inside of the aero cap. This can be very difficult and may damage the aero cap.

Are Tesla aero caps reusable?

Yes, Tesla aero caps are reusable. Once you have removed them, you can simply put them back on your Tesla.