How to Remove a Tesla Emblem in 30 Seconds!

To remove a Tesla emblem, you will need a flathead screwdriver and a hairdryer.

1. Heat the emblem with the hairdryer until it is warm to the touch.
2. Insert the flathead screwdriver under the emblem and gently pry it up.
3. Continue prying up until the emblem is completely removed.

So, How To Take Off Tesla Emblem

How to Take Off a Tesla Emblem

To remove a Tesla emblem, you will need a flathead screwdriver and a hairdryer.

1. Heat the emblem with the hairdryer for about 30 seconds.
2. Use the flathead screwdriver to pry up one corner of the emblem.
3. Continue prying around the emblem until it pops off.
4. Use the screwdriver to remove the adhesive residue from the car.

How to Take Off a Tesla Emblem

Tools Needed

Small flathead screwdriver
Hair dryer
Goo Gone or other adhesive remover

Instructions

1. Preheat the emblem:
Use a hair dryer to heat the emblem for a few minutes. This will soften the adhesive and make it easier to remove.

2. Use a flathead screwdriver to pry up the emblem:
Start at one corner and gently pry up the emblem. Be careful not to damage the paint.3. Apply adhesive remover to the residue:
Once the emblem is removed, apply adhesive remover to the residue. Let the adhesive remover sit for a few minutes, then wipe it away with a cloth.

Tips

If the emblem is stuck on tightly, you can use a heat gun instead of a hair dryer. Be careful not to use too much heat, as you could damage the paint.
If you have trouble removing the emblem, you can try using a dental floss. Wrap the floss around the emblem and pull it up.
Be careful not to damage the paint when removing the emblem. If you do damage the paint, you can repair it with a touch-up paint kit.

Warnings

Do not use excessive force when removing the emblem. You could damage the paint or the emblem.
Do not use sharp objects to remove the emblem. You could damage the paint or the emblem.
Do not use chemicals that are not specifically designed for removing adhesive. You could damage the paint or the emblem.

Also Read: How To Take Off Tesla Headrest

FAQs on How to Take Off Tesla Emblem

How do I remove the Tesla emblem from my car?

To remove the Tesla emblem from your car, you will need:

A flathead screwdriver
A heat gun or hair dryer
Goo Gone or another adhesive remover

1. Preheat the emblem with a heat gun or hair dryer: This will soften the adhesive and make it easier to remove.
2. Use a flathead screwdriver to pry up the edges of the emblem: Be careful not to damage the paint.
3. Apply adhesive remover to the remaining adhesive: Let it sit for a few minutes, then wipe it away with a cloth.
4. Wash the area with soap and water to remove any remaining residue:

What if the emblem is stuck?

If the emblem is stuck, you can try using a stronger adhesive remover, such as WD-40 or acetone. Be careful not to use too much, as these products can damage the paint.

Can I remove the emblem without damaging the paint?

Yes, you can remove the emblem without damaging the paint if you follow the steps carefully. Be sure to use a heat gun or hair dryer on a low setting and to pry up the edges of the emblem carefully.

What if I damage the paint?

If you damage the paint, you can try to repair it with a touch-up kit. If the damage is extensive, you may need to take your car to a body shop for repairs.

Can I replace the emblem if I damage it?

Yes, you can replace the emblem if you damage it. You can purchase a replacement emblem from a Tesla dealership or online.