How to Remove Tesla Wheel Caps in 3 Easy Steps

To remove a Tesla wheel cap, you will need a flathead screwdriver. First, locate the center cap emblem. There will be a small hole in the center of the emblem. Insert the screwdriver into the hole and pry up on the emblem. The emblem should pop off, revealing the lug nuts. Use the lug wrench to loosen and remove the lug nuts. Lift off the wheel and remove the wheel cap.

How to Remove Tesla Wheel Caps in 3 Easy Steps

1. Locate the wheel cap removal tool:
This tool is typically located in the center console of the vehicle.

2. Insert the tool into the small hole in the center of the wheel cap:

3. Twist the tool clockwise until the wheel cap pops off:

Note:
If the wheel cap is difficult to remove, you can try using a hair dryer to heat it up slightly. This will make the plastic more pliable and easier to remove.

How to Take Off Tesla Wheel Cap

Step 1: Gather your tools

To remove a Tesla wheel cap, you will need the following tools:

A lug wrench
A flathead screwdriver
A rubber mallet

Step 2: Locate the lug nuts

The lug nuts on a Tesla are located on the center of the wheel. There are five lug nuts per wheel, and they are all the same size.

Step 3: Loosen the lug nuts

Use the lug wrench to loosen the lug nuts on the wheel. Turn the lug wrench counterclockwise until the lug nuts are loose enough to remove by hand.

Step 4: Remove the lug nuts

Once the lug nuts are loose, you can remove them by hand. Use the flathead screwdriver to pry the lug nuts off of the wheel.

Step 5: Remove the wheel cap

Once the lug nuts are removed, you can remove the wheel cap. Use the flathead screwdriver to pry the wheel cap off of the wheel.

Step 6: Replace the wheel cap

To replace the wheel cap, simply reverse the steps above. Put the wheel cap back on the wheel and tighten the lug nuts.

Also Read: How To Turn Autopilot On Tesla

FAQs on How to Take Off Tesla Wheel Caps

How do I remove a Tesla wheel cap?

To remove a Tesla wheel cap, you will need a coin and a flathead screwdriver.

1. Insert the coin into the small hole in the center of the wheel cap.
2. Use the flathead screwdriver to pry up the wheel cap.
3. Continue prying up the wheel cap until it pops off.

What size coin do I need to remove a Tesla wheel cap?

You will need a dime to remove a Tesla wheel cap.

Can I use a different type of coin to remove a Tesla wheel cap?

No, you cannot use a different type of coin to remove a Tesla wheel cap. You must use a dime.

What if I can’t get the wheel cap to pop off?

If you can’t get the wheel cap to pop off, you can try using a different coin or a different screwdriver. You can also try applying more pressure to the screwdriver.

What should I do with the wheel cap after I remove it?

You can store the wheel cap in a safe place until you are ready to put it back on. You can also sell the wheel cap if you no longer want it.