Unlock the Secret: Remove Tesla Hubcaps in Seconds!

To remove a Tesla hubcap, you will need

– A flathead screwdriver
– A 10mm socket wrench
– A 17mm socket wrench

1. Park your car on a level surface.
2. Remove the lug nuts from the wheel using the 10mm socket wrench.
3. Use the flathead screwdriver to pry off the center cap.
4. Remove the 17mm bolts holding the hubcap in place.
5. Lift off the hubcap.

So, How To Take Tesla Hubcaps Off

To remove a Tesla hubcap, you will need a flathead screwdriver and a 10mm socket wrench.

1. Locate the lug nuts on the wheel and loosen them with the 10mm socket wrench.
2. Pry up the center cap of the hubcap with the flathead screwdriver.
3. Pull the hubcap off of the wheel.

How to Take Tesla Hubcaps Off

Tools Needed

17mm socket wrench
10mm socket wrench
Phillips head screwdriver
Flathead screwdriver
Rag

Step 1: Remove the Lug Nuts

1. Park your Tesla in a safe location.
2. Turn the lug nuts counterclockwise until they are loose.
3. Use the 17mm socket wrench to remove the lug nuts.
4. Place the lug nuts in a safe location.

Step 2: Remove the Center Cap

1. Use the flathead screwdriver to pry up the center cap.
2. Be careful not to damage the center cap.
3. Remove the center cap.

Step 3: Remove the Hubcap

1. Use the 10mm socket wrench to loosen the lug nuts on the hubcap.
2. Use the Phillips head screwdriver to remove the screws on the hubcap.
3. Remove the hubcap.

Step 4: Clean the Hubcap

1. Use the rag to clean the hubcap.
2. Be sure to remove all dirt, debris, and grease.

Step 5: Reinstall the Hubcap

1. Reinstall the hubcap in the opposite order of removal.
2. Tighten the lug nuts and screws securely.
3. Test the hubcap to make sure it is installed correctly.

Also Read: How To Take Tesla Off Valet Mode

FAQs on How to Take Tesla Hubcaps Off

How do I remove Tesla hubcaps?

To remove Tesla hubcaps, you will need:

A flathead screwdriver
A rubber mallet
A pair of pliers

1. Remove the lug nuts from the wheels.
2. Use the flathead screwdriver to pry up the center cap.
3. Use the rubber mallet to tap on the hubcap until it pops off.
4. Use the pliers to remove the clips that hold the hubcap in place.

What tools do I need to remove Tesla hubcaps?

You will need a flathead screwdriver, a rubber mallet, and a pair of pliers to remove Tesla hubcaps.

How long does it take to remove Tesla hubcaps?

It takes about 5 minutes to remove Tesla hubcaps.

Can I remove Tesla hubcaps without tools?

It is not possible to remove Tesla hubcaps without tools.

What happens if I drive with Tesla hubcaps off?

Driving with Tesla hubcaps off can damage the wheels and can be dangerous.