How to Remove a Tesla Wheel Cover in 3 Easy Steps!

To remove a Tesla wheel cover, you will need

– A flat head screwdriver
– A 10mm socket wrench
– A 19mm socket wrench

1. Place the car in park and set the parking brake.
2. Remove the lug nuts from the wheel using the 10mm socket wrench.
3. Pry up the center cap of the wheel cover using the flat head screwdriver.
4. Remove the 19mm bolt holding the wheel cover in place.
5. Lift up and remove the wheel cover.

So, How To Take Tesla Wheel Cover Off

To remove a Tesla wheel cover:

1. Place the car on a level surface.
2. Remove the lug nuts from the wheel.
3. Use a pry bar to pry the wheel cover up and off of the wheel.
4. Reinstall the lug nuts and lower the car.

How to Take Tesla Wheel Cover Off

Tools You Will Need

10mm socket wrench
12mm socket wrench
17mm socket wrench
Phillips head screwdriver
Flathead screwdriver
Rags
Penetrating oil

Step 1: Remove the Lug Nuts

1. Park your Tesla on a level surface.
2. Turn the lug nuts counterclockwise until they are loose.
3. Use the 10mm socket wrench to remove the lug nuts.
4. Place the lug nuts in a safe location so that you don’t lose them.

Step 2: Remove the Wheel Cover

1. Grab the wheel cover with both hands and pull it straight up.
2. The wheel cover may be difficult to remove, so you may need to use a little force.
3. Once the wheel cover is removed, set it aside.

Step 3: Remove the Lug Bolts

1. Use the 12mm socket wrench to remove the lug bolts.
2. Place the lug bolts in a safe location so that you don’t lose them.

Step 4: Remove the Hubcap

1. Grab the hubcap with both hands and pull it straight up.
2. The hubcap may be difficult to remove, so you may need to use a little force.
3. Once the hubcap is removed, set it aside.

Step 5: Remove the Wheel

1. Grab the wheel with both hands and lift it straight up.
2. The wheel may be heavy, so you may need to use a little force.
3. Once the wheel is removed, set it aside.

Step 6: Replace the Wheel Cover

1. Align the wheel cover with the lug bolts.
2. Press down on the wheel cover until it snaps into place.

Step 7: Replace the Lug Bolts

1. Insert the lug bolts into the wheel.
2. Use the 12mm socket wrench to tighten the lug bolts.
3. Tighten the lug bolts until they are snug.

Step 8: Replace the Lug Nuts

1. Insert the lug nuts into the wheel.
2. Use the 10mm socket wrench to tighten the lug nuts.
3. Tighten the lug nuts until they are snug.

Step 9: Re-torque the Lug Nuts

After driving your Tesla for 50 miles, you should re-torque the lug nuts to ensure that they are properly tightened.

Also Read: How To Tax Write Off A Tesla

FAQs: How to Take Tesla Wheel Cover Off

What tools do I need to remove Tesla wheel covers?

You will need a lug wrench, a T25 Torx driver, and a flathead screwdriver.

How do I remove the lug nuts on my Tesla?

1. Place the car on a level surface and apply the parking brake.
2. Loosen the lug nuts on each wheel by turning them counterclockwise with the lug wrench.
3. Remove the lug nuts completely and set them aside.

How do I remove the Tesla wheel cover?

1. Locate the two Torx screws on the inside of the wheel cover.
2. Use the T25 Torx driver to loosen and remove the two screws.
3. Pry up the edge of the wheel cover with a flathead screwdriver.
4. Carefully remove the wheel cover from the wheel.

How do I put the Tesla wheel cover back on?

1. Align the wheel cover with the wheel and press it down until it snaps into place.
2. Use the two Torx screws to secure the wheel cover to the wheel.
3. Tighten the lug nuts on each wheel by turning them clockwise with the lug wrench.

What are the benefits of removing Tesla wheel covers?

There are a few benefits to removing Tesla wheel covers:

Improved performance: Removing the wheel covers can improve the performance of your Tesla by reducing wind resistance.
Increased visibility: Removing the wheel covers can improve visibility by allowing you to see the brake calipers and rotors.
Customization: Removing the wheel covers can allow you to customize the look of your Tesla by adding different wheels or wheel caps.