Volkswagen Auto Hold Not Working

As a certified Volkswagen service technician, I have seen firsthand the frustration and inconvenience that can be caused by a malfunctioning auto hold system. This guide is designed to help you quickly diagnose and resolve the issue so that you can get back on the road as soon as possible.

The auto hold system is designed to keep your vehicle stationary when you come to a stop, such as at a traffic light or in a long line of traffic. When the system is working properly, you can release the brake pedal and the vehicle will hold its position without rolling forward or backward. However, if the system malfunctions, the vehicle may roll forward or backward when you release the brake pedal. This can be dangerous and can lead to an accident.

The following steps will help you troubleshoot the issue and potentially resolve it.

1. Check the brake fluid level. The auto hold system uses brake fluid to operate. If the brake fluid level is low, the system may not be able to function properly.
2. Inspect the brake pads and rotors. If the brake pads are worn or the rotors are damaged, the auto hold system may not be able to apply enough pressure to the brakes to hold the vehicle stationary.
3. Check the wiring and connectors. The auto hold system is controlled by a computer. If there is a problem with the wiring or connectors, the system may not be able to function properly.
4. Perform a diagnostic test. If you have checked the brake fluid level, the brake pads and rotors, and the wiring and connectors and you still can’t resolve the issue, you may need to have a diagnostic test performed by a qualified Volkswagen technician.

Why Volkswagen Auto Hold Not Working

Brake fluid level low

If the brake fluid level is too low, the auto hold function will not work. This is because the brake fluid is needed to apply pressure to the brake pads and rotors, which is what stops the car. If the brake fluid level is too low, there will not be enough pressure to apply the brakes, and the auto hold function will not work.

Faulty brake light switch

The brake light switch is a switch that tells the car that the brakes are being applied. This switch is used by the auto hold function to determine when to engage and disengage the auto hold function. If the brake light switch is faulty, the car will not be able to tell that the brakes are being applied, and the auto hold function will not work.

Faulty brake control module

The brake control module is a computer that controls the brakes. This module is responsible for sending signals to the brake pads and rotors, which is what stops the car. If the brake control module is faulty, the car will not be able to stop properly, and the auto hold function will not work.

Faulty wiring

The auto hold function is controlled by a series of wires. If any of these wires are damaged or disconnected, the auto hold function will not work.

Software glitch

The auto hold function is controlled by software. If there is a glitch in the software, the auto hold function may not work properly.

How to Troubleshoot: Volkswagen Auto Hold Not Working

What is Volkswagen Auto Hold?

Volkswagen Auto Hold is a feature that helps to keep your car stationary when you’re stopped at a light or in traffic. It does this by applying the brakes automatically when you take your foot off the brake pedal. This can be a helpful feature in stop-and-go traffic, as it can prevent your car from rolling forward or backward.

What are the symptoms of a Volkswagen Auto Hold problem?

There are a few different symptoms that may indicate that your Volkswagen Auto Hold system is not working properly. These include:

The Auto Hold light on the dashboard is not illuminated when you put the car in park.
The brakes do not automatically apply when you take your foot off the brake pedal.
The car rolls forward or backward when you take your foot off the brake pedal.

How to troubleshoot a Volkswagen Auto Hold problem

If you’re experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself. Here are a few things you can check:

Check the brake fluid level. If the brake fluid level is low, it can cause the Auto Hold system to malfunction.
Check the brake pads and rotors. If the brake pads or rotors are worn, it can also cause the Auto Hold system to malfunction.
Check the ABS sensors. The ABS sensors can sometimes become dirty or damaged, which can cause the Auto Hold system to malfunction.

If you’ve checked all of these things and the problem persists, you’ll need to take your car to a Volkswagen dealer for further diagnosis and repair.

How to prevent Volkswagen Auto Hold problems

There are a few things you can do to help prevent Volkswagen Auto Hold problems:

Keep the brake fluid level topped off. A low brake fluid level can cause the Auto Hold system to malfunction.
Regularly inspect the brake pads and rotors. Worn brake pads or rotors can also cause the Auto Hold system to malfunction.
Have the ABS sensors cleaned or replaced as needed. Dirty or damaged ABS sensors can cause the Auto Hold system to malfunction.

By following these tips, you can help to keep your Volkswagen Auto Hold system working properly.

Next Post To Read: Volkswagen Backup Camera Not Working