Volkswagen Jetta Push Start Not Working [Fix It Now!]

There’s nothing more frustrating than trying to start your Volkswagen Jetta and the push-button start doesn’t work. You push and push, but nothing happens. You’re late for work, and you’re starting to sweat.

If you’re experiencing this issue, you’re not alone. It’s a common problem with Volkswagen Jettas, and there are a few things you can do to try to fix it. In this guide, I’ll walk you through the troubleshooting process, so you can get your Jetta back up and running as soon as possible.

Reasons Why Volkswagen Jetta Push Start Not Working

Dead or Weak Battery

The most common reason for a Volkswagen Jetta push start not working is a dead or weak battery. If the battery is too low, it will not be able to provide enough power to start the car. You can check the battery voltage with a voltmeter. If the voltage is below 12 volts, the battery needs to be replaced.

Faulty Push Start Button

The push start button is a small electronic switch that sends a signal to the car’s computer to start the engine. If the button is faulty, it will not be able to send the signal and the car will not start. You can test the push start button by disconnecting the battery and then reconnecting it. If the car starts, the button is faulty and needs to be replaced.

Faulty Ignition Switch

The ignition switch is a mechanical switch that connects the battery to the car’s starter motor. If the ignition switch is faulty, it will not be able to connect the battery to the starter motor and the car will not start. You can test the ignition switch by turning the key to the On position. If the car does not start, the ignition switch is faulty and needs to be replaced.

Faulty Starter Motor

The starter motor is an electric motor that turns the engine over and starts it. If the starter motor is faulty, it will not be able to turn the engine over and the car will not start. You can test the starter motor by connecting a jumper cable from the battery to the starter motor. If the starter motor does not turn the engine over, the starter motor is faulty and needs to be replaced.

Also Read: Volkswagen Jetta Windshield Wipers Not Working

How to Troubleshoot: Volkswagen Jetta Push Start Not Working

The Volkswagen Jetta is a popular compact car that is known for its reliability and fuel efficiency. However, like any other car, the Jetta can experience problems from time to time. One common problem that Jetta owners may encounter is a push-start that is not working. This can be a frustrating problem, as it can make it difficult to start the car. However, there are a few things that you can check to troubleshoot the problem and get your Jetta up and running again.

Possible Causes

There are a few possible causes for a Volkswagen Jetta push-start not working. These include:

A dead battery:
This is the most common cause of a push-start not working. If the battery is too low, it will not have enough power to start the car.

A faulty starter motor:
The starter motor is responsible for turning the engine over and starting it. If the starter motor is faulty, it will not be able to start the car.

A bad ignition switch:
The ignition switch is responsible for sending power to the starter motor. If the ignition switch is faulty, it will not be able to start the car.

A loose or corroded connection:
The electrical system in your Jetta is made up of a series of wires and connectors. If one of these connections is loose or corroded, it can prevent power from reaching the starter motor and cause the push-start not to work.

How to Troubleshoot

To troubleshoot a Volkswagen Jetta push-start not working, you will need to:

1. Check the battery:
The first thing you should do is check the battery to make sure it is not dead. You can do this by using a voltmeter to check the battery’s voltage. If the battery’s voltage is below 12 volts, it is too low and will need to be replaced.

2. Check the starter motor:
If the battery is not the problem, you will need to check the starter motor. You can do this by connecting a jumper cable from the battery to the starter motor. If the starter motor does not turn over, it is faulty and will need to be replaced.3. Check the ignition switch:
If the starter motor turns over but the car does not start, you will need to check the ignition switch. You can do this by disconnecting the ignition switch from the wiring harness and using a voltmeter to check for power. If there is no power at the ignition switch, it is faulty and will need to be replaced.

4. Check for loose or corroded connections:
If the ignition switch is not the problem, you will need to check for loose or corroded connections in the electrical system. You can do this by visually inspecting the wires and connectors. If you find any loose or corroded connections, you will need to repair or replace them.

Conclusion

By following these steps, you can troubleshoot a Volkswagen Jetta push-start not working and get your car up and running again. If you are unable to troubleshoot the problem yourself, you can take your car to a qualified Volkswagen dealer or repair shop for assistance.

FAQs: Volkswagen Jetta Push Start Not Working

Why is my Volkswagen Jetta push start not working?

There are a few possible reasons why your Volkswagen Jetta push start may not be working. Here are some of the most common causes:

The battery is dead: The most common reason for a push start not working is a dead battery. If your battery is low on power, it may not be able to provide enough voltage to start the engine.

The starter is bad: The starter is a motor that turns the engine over and starts it. If the starter is bad, it will not be able to turn the engine over and start it.

The ignition switch is bad: The ignition switch is a switch that sends power to the starter. If the ignition switch is bad, it will not be able to send power to the starter and start the engine.

The wiring is damaged: The wiring that connects the battery to the starter and the starter to the ignition switch can be damaged. If the wiring is damaged, it will not be able to send power to the starter and start the engine.

How do I fix my Volkswagen Jetta push start?

To fix your Volkswagen Jetta push start, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix it:

If the battery is dead, you will need to jump-start the car. To do this, you will need another car with a working battery. Connect the positive terminal of the jumper cables to the positive terminal of the dead battery and the negative terminal of the jumper cables to the negative terminal of the good battery. Once the batteries are connected, start the good car and let it run for a few minutes. Then, try to start the dead car.

If the starter is bad, you will need to replace it. To do this, you will need to remove the old starter and install a new one.

If the ignition switch is bad, you will need to replace it. To do this, you will need to remove the old ignition switch and install a new one.

If the wiring is damaged, you will need to repair or replace the damaged wiring. To do this, you will need to identify the damaged wiring and repair or replace it.

What are the symptoms of a Volkswagen Jetta push start not working?

There are a few symptoms that may indicate that your Volkswagen Jetta push start is not working. These symptoms include:

The engine does not start when you press the push start button.
The engine starts and then dies immediately.
The engine starts but runs rough.
The engine makes a clicking noise when you try to start it.

What can I do if my Volkswagen Jetta push start is not working?

If your Volkswagen Jetta push start is not working, there are a few things you can do. Here are some of your options:

Take your car to a mechanic: A mechanic can diagnose the problem and fix it for you.

Try to fix the problem yourself: If you are handy with cars, you may be able to fix the problem yourself. There are a number of resources available online that can help you troubleshoot and fix the problem.

Purchase a replacement push start: If the push start is not worth fixing, you can purchase a replacement push start. There are a number of different push starts available on the market, so you can find one that fits your needs and budget.

How much does it cost to fix a Volkswagen Jetta push start?

The cost of fixing a Volkswagen Jetta push start will vary depending on the cause of the problem. If the battery is dead, it will cost around $50 to replace it. If the starter is bad, it will cost around $200 to replace it. If the ignition switch is bad, it will cost around $100 to replace it. If the wiring is damaged, it will cost around $50 to repair or replace it.