Volkswagen Push To Start Not Working

As a certified Volkswagen technician, I understand the frustration and inconvenience that can come with a malfunctioning push-to-start system. Not only is it a safety hazard, but it can also be a major inconvenience. That’s why I’ve put together this troubleshooting guide to help you quickly diagnose and resolve the issue.

In this guide, I’ll walk you through the steps to troubleshoot a push-to-start system that’s not working. I’ll start by explaining the basics of the system and then I’ll go over the most common causes of failure. Finally, I’ll provide you with a step-by-step guide to help you troubleshoot the issue and get your vehicle back up and running.

By the end of this guide, you’ll have a better understanding of how the push-to-start system works and you’ll be able to troubleshoot any problems that you may encounter.

Why Volkswagen Push To Start Not Working

Dead Battery

The most common reason for a Volkswagen push to start not working is a dead battery. If the battery is too low, the car will not be able to start and the push to start button will not work. To check the battery, use a voltmeter to measure the voltage. If the voltage is below 12 volts, the battery needs to be replaced.

Faulty Push to Start Button

Another possible cause of a Volkswagen push to start not working is a faulty push to start button. The button may be stuck, damaged, or not making good contact with the car’s computer. To check the push to start button, try pressing it multiple times. If the button does not work, it will need to be replaced.

Faulty Wiring

The wiring between the push to start button and the car’s computer can also be a cause of a Volkswagen push to start not working. If the wiring is damaged or corroded, it can prevent the signal from being sent from the button to the computer. To check the wiring, inspect it for damage or corrosion. If the wiring is damaged, it will need to be repaired or replaced.

Faulty Computer

In rare cases, the computer in a Volkswagen car can be the cause of a push to start not working. If the computer is not sending the signal to start the car, the push to start button will not work. To check the computer, a Volkswagen technician will need to use a diagnostic tool to scan the system for errors. If the computer is faulty, it will need to be replaced.

How to Troubleshoot: Volkswagen Push to Start Not Working

Your Volkswagen’s push-to-start system is a convenient way to start your car without having to take your keys out of your pocket. However, if your push-to-start system isn’t working, it can be a major inconvenience.

There are a few things that could be causing your push-to-start system to not work. In this article, we’ll walk you through the steps to troubleshoot the problem and get your car started again.

Step 1: Check the battery

The first thing you should check is the battery. If the battery is low, it may not have enough power to start the car. You can check the battery by using a voltmeter. If the battery voltage is below 12 volts, it needs to be replaced.

Step 2: Check the starter relay

The starter relay is a small electrical switch that sends power to the starter motor. If the starter relay is faulty, it can prevent the starter motor from turning over the engine. You can check the starter relay by using a multimeter. If the multimeter shows that the starter relay is not getting power, it needs to be replaced.

Step 3: Check the starter motor

The starter motor is the component that actually turns over the engine. If the starter motor is faulty, it won’t be able to start the car. You can check the starter motor by using a multimeter. If the multimeter shows that the starter motor is not getting power, it needs to be replaced.

Step 4: Check the ignition switch

The ignition switch is a mechanical switch that sends power to the starter motor. If the ignition switch is faulty, it won’t be able to start the car. You can check the ignition switch by using a multimeter. If the multimeter shows that the ignition switch is not getting power, it needs to be replaced.

Step 5: Check the wiring

The wiring between the battery, starter relay, starter motor, and ignition switch is critical for the push-to-start system to work properly. If any of the wires are damaged or disconnected, it can prevent the system from working. You can check the wiring by visually inspecting it for damage. If you find any damage, you’ll need to repair or replace the wires.

Step 6: Reset the push-to-start system

In some cases, the push-to-start system may not be working properly because it needs to be reset. You can reset the push-to-start system by following the instructions in your vehicle’s owner’s manual.

Conclusion

If you’ve followed these steps and your push-to-start system still isn’t working, you’ll need to take your car to a qualified mechanic for further diagnosis and repairs.

Additional Tips

If you’re having trouble starting your car, try using the key to start it instead of the push-to-start button. This will help you determine if the problem is with the push-to-start system or with the car’s engine.
If you’re having trouble starting your car in cold weather, try warming up the car for a few minutes before trying to start it. This will help the battery and starter motor work more efficiently.
If you’re having trouble starting your car after it’s been sitting for a long time, try disconnecting the battery for a few minutes and then reconnecting it. This will reset the car’s electrical system and may help the push-to-start system work properly.

Next Post To Read: Volkswagen Radiator Fan Not Working