2000 Ford Expedition Rear Wiper Not Working [Quick Fixes]

Your 2000 Ford Expedition’s rear wiper is an important safety feature that helps to keep your rear window clear of water, snow, and debris. When the rear wiper isn’t working, it can be a major inconvenience. You may have trouble seeing behind you when backing up, and you could be at risk of an accident.

In this guide, we will walk you through the steps to troubleshoot a 2000 Ford Expedition rear wiper that is not working. We will cover common causes of the problem, as well as the steps to take to fix it. By the end of this guide, you will be able to get your rear wiper working again so that you can safely drive your Expedition.

Why 2000 Ford Expedition Rear Wiper Not Working

Wiring

– Check the wiring harness for damage or corrosion.
– Make sure the connectors are properly seated.
– Inspect the fuses for blown or damaged fuses.

Rear Wiper Motor

– Check the motor for power by using a multimeter.
– Inspect the motor for damage or wear.
– Replace the motor if necessary.

Rear Wiper Switch

– Check the switch for power by using a multimeter.
– Inspect the switch for damage or wear.
– Replace the switch if necessary.

Rear Wiper Blade

– Check the blade for wear or damage.
– Replace the blade if necessary.

2000 Ford Expedition Rear Wiper Not Working

Symptoms

There are a few different symptoms that may indicate that the rear wiper on your 2000 Ford Expedition is not working properly. These include:

The rear wiper does not move when you turn the switch on.
The rear wiper moves intermittently or slowly.
The rear wiper makes a grinding or squealing noise when it is turned on.
The rear wiper leaves streaks on the rear window.

Causes

There are a number of different things that could cause the rear wiper on your 2000 Ford Expedition to stop working. These include:

A faulty rear wiper motor.
A bad rear wiper switch.
A loose or corroded connection between the rear wiper motor and the switch.
A damaged rear wiper blade.

Diagnosis

To diagnose the problem with your 2000 Ford Expedition’s rear wiper, you will need to:

1. Turn on the rear wiper switch and observe the wiper.
2. Listen for any unusual noises coming from the rear wiper motor.
3. Check the connection between the rear wiper motor and the switch.
4. Remove the rear wiper blade and inspect it for damage.

Repair

Once you have diagnosed the problem with your 2000 Ford Expedition’s rear wiper, you can repair it by:

Replacing the rear wiper motor.
Replacing the rear wiper switch.
Repairing or replacing the connection between the rear wiper motor and the switch.
Replacing the rear wiper blade.

Prevention

You can help prevent problems with your 2000 Ford Expedition’s rear wiper by:

Keeping the rear wiper blades clean and in good condition.
Avoiding using the rear wiper on dry windows.
Inspecting the rear wiper motor and switch regularly for signs of wear or damage.

Conclusion

If your 2000 Ford Expedition’s rear wiper is not working properly, you can troubleshoot the problem and repair it yourself using the information in this article. If you are not comfortable doing this work yourself, you can take your vehicle to a qualified mechanic for repairs.

Also Read: 2000 Ford Expedition Turn Signal Not Working

FAQs: 2000 Ford Expedition Rear Wiper Not Working

Why is my 2000 Ford Expedition rear wiper not working?

There are a few possible reasons why your 2000 Ford Expedition rear wiper may not be working.

The wiper motor is not working: This is the most common cause of a rear wiper that is not working. The wiper motor is responsible for moving the wiper blades back and forth. If the motor is not working, the wiper blades will not move and the rear window will not be cleaned.

The wiper linkage is damaged: The wiper linkage is the part of the rear wiper system that connects the wiper motor to the wiper blades. If the linkage is damaged, it can prevent the wiper blades from moving properly.

The wiper switch is not working: The wiper switch is the part of the rear wiper system that controls the operation of the wiper motor. If the switch is not working, the wiper motor will not be activated and the wiper blades will not move.

The rear window washer fluid reservoir is empty: The rear window washer fluid reservoir is responsible for providing fluid to the rear wiper blades. If the reservoir is empty, the wiper blades will not be able to clean the rear window.

The rear window washer fluid nozzle is clogged: The rear window washer fluid nozzle is responsible for spraying fluid onto the rear window. If the nozzle is clogged, the fluid will not be able to reach the rear window and the wiper blades will not be able to clean it.

How do I fix a 2000 Ford Expedition rear wiper that is not working?

To fix a 2000 Ford Expedition rear wiper that is not working, you will need to identify the cause of the problem and then take the appropriate steps to fix it.

If the wiper motor is not working, you will need to replace the wiper motor. To do this, you will need to remove the old wiper motor and install a new one.

If the wiper linkage is damaged, you will need to replace the wiper linkage. To do this, you will need to remove the old wiper linkage and install a new one.

If the wiper switch is not working, you will need to replace the wiper switch. To do this, you will need to remove the old wiper switch and install a new one.

If the rear window washer fluid reservoir is empty, you will need to fill the reservoir with fluid. To do this, you will need to remove the cap from the reservoir and add fluid until the reservoir is full.

If the rear window washer fluid nozzle is clogged, you will need to clean the nozzle. To do this, you will need to remove the nozzle from the vehicle and use a small brush to clean out the nozzle.

How can I prevent my 2000 Ford Expedition rear wiper from not working?

There are a few things you can do to prevent your 2000 Ford Expedition rear wiper from not working.

Keep the wiper blades clean: Dirty wiper blades can cause the wiper motor to work harder than it needs to, which can eventually lead to the motor failing. To keep the wiper blades clean, you should wash them regularly with soap and water.

Replace the wiper blades when they are worn out: Worn out wiper blades can cause the wiper motor to work harder than it needs to, which can eventually lead to the motor failing. To prevent this, you should replace the wiper blades when they are worn out.

Use the rear wiper sparingly: The rear wiper is not necessary for driving in most conditions. Only use the rear wiper when it is necessary to clean the rear window.

Park in a sheltered area: Parking in a sheltered area can help to protect the rear wiper from damage. When you park, try to park in a spot that is protected from the sun, rain, and snow.

What are the symptoms of a 2000 Ford Expedition rear wiper that is not working?

There are a few symptoms that can indicate that your 2000 Ford Expedition rear wiper is not working.

The rear wiper blades do not move when the wiper switch is turned on.
The rear wiper blades do not move at the correct speed.
The rear wiper blades make a grinding or squealing noise when they are in use.
The rear wiper blades leave streaks on the rear window.

What are the dangers of driving a 2000 Ford Expedition with a rear wiper that is not working?