2012 Ford Expedition Heated Seats Not Working [With Solution]

Do you own a 2012 Ford Expedition and are experiencing problems with your heated seats You’re not alone. This is a common issue that can be frustrating and inconvenient. But don’t worry, there is a fix! In this guide, I will walk you through the steps on how to troubleshoot and repair your heated seats. By the end of this guide, you’ll be back to enjoying your warm and toasty seats in no time.

Why 2012 Ford Expedition Heated Seats Not Working

Reasons or Causes

Faulty seat heater switch: The seat heater switch is a potentiometer that controls the amount of power that is sent to the seat heaters. If the switch is faulty, it may not be able to send the correct amount of power to the heaters, which will cause them to not work.

Faulty seat heater wiring: The seat heater wiring can become damaged or corroded over time, which can prevent the power from reaching the seat heaters.

Faulty seat heater element: The seat heater element is a heating element that is embedded in the seat. If the element is faulty, it will not be able to generate heat, which will cause the seat heaters not to work.

Blown seat heater fuse: The seat heater fuse is a small fuse that protects the seat heater circuit from overloads. If the fuse is blown, it will prevent power from reaching the seat heaters.

How to Troubleshoot: 2012 Ford Expedition Heated Seats Not Working

The heated seats in your 2012 Ford Expedition are a great way to stay warm on cold winter days. However, if your heated seats are not working, it can be a major inconvenience. There are a few things that you can check to troubleshoot the problem and get your heated seats working again.

Step 1: Check the fuses

The first thing you should do is check the fuses for the heated seats. The fuses are located in the fuse box under the hood. There should be a fuse labeled Heated Seats or Seat Heater. Remove the fuse and check it for a blown fuse. If the fuse is blown, replace it with a new fuse of the same amperage.

Step 2: Check the wiring

If the fuse is not blown, the next thing you should check is the wiring. The wiring for the heated seats runs from the fuse box to the seats. Inspect the wiring for any damage or corrosion. If you find any damage, repair or replace the wiring.

Step 3: Check the switch

The switch for the heated seats is located on the center console. Check the switch to make sure it is turned on. If the switch is turned on, but the heated seats are still not working, the switch may be defective. You can test the switch by using a multimeter to check for continuity.

Step 4: Check the seat heater elements

If the fuses, wiring, and switch are all good, the problem may be with the seat heater elements. The seat heater elements are located in the seats. You can test the seat heater elements by using a multimeter to check for continuity. If the seat heater elements are not working, they will need to be replaced.

Conclusion

If you have followed these steps and your heated seats are still not working, you may need to take your vehicle to a qualified mechanic for further diagnosis and repair.

Additional Tips

If you are not comfortable working on your vehicle, you should take it to a qualified mechanic.
When working on your vehicle, always wear safety glasses and gloves.
Make sure to disconnect the battery before working on the electrical system.
Keep in mind that the heated seats are a part of your vehicle’s electrical system. If you are not sure how to troubleshoot the problem, you should take your vehicle to a qualified mechanic.

Also Read: 2012 Ford Expedition Radio Display Not Working

FAQs: 2012 Ford Expedition Heated Seats Not Working

Why are my heated seats not working?

There are a few possible reasons why your heated seats may not be working. Here are some of the most common causes:

The seat heater fuse is blown: This is the most common cause of heated seats not working. To check the fuse, you will need to locate the fuse box in your vehicle. Once you have located the fuse box, you will need to find the fuse for the heated seats. The fuse is usually labeled Heated Seats or Seat Heater. If the fuse is blown, you will need to replace it with a new fuse of the same amperage.

The seat heater wiring is damaged: The wiring for the heated seats can be damaged if the seats are subjected to excessive force or if the wiring is pinched or frayed. If the wiring is damaged, you will need to have it repaired or replaced.

The seat heater element is defective: The seat heater element is the part of the seat that actually generates heat. If the element is defective, it will not be able to generate heat and the seats will not warm up. If the element is defective, you will need to have it replaced.

How do I fix my heated seats?

To fix your heated seats, you will need to determine the cause of the problem. Once you have determined the cause of the problem, you can take the appropriate steps to fix it.

If the fuse is blown, you can replace it with a new fuse of the same amperage. If the wiring is damaged, you will need to have it repaired or replaced. If the element is defective, you will need to have it replaced.

How much does it cost to fix heated seats?

The cost of fixing heated seats will vary depending on the cause of the problem. If the fuse is blown, it will only cost a few dollars to replace the fuse. If the wiring is damaged, it will cost more to repair or replace the wiring. If the element is defective, it will cost the most to replace the element.

Can I fix my heated seats myself?

In some cases, you may be able to fix your heated seats yourself. However, if the problem is with the wiring or the element, it is best to have the problem diagnosed and repaired by a qualified technician.

What should I do if my heated seats are still not working after I have fixed them?

If your heated seats are still not working after you have fixed them, you should take your vehicle to a qualified technician to have the problem diagnosed and repaired.