2017 Ford Expedition: How to Fix a Broken Backup Camera

2017 Ford Expedition Backup Camera Not Working

Your 2017 Ford Expedition’s backup camera is a valuable safety feature, helping you to see behind you when backing up. But what happens when the camera stops working It can be a frustrating and even dangerous situation.

In this guide, we’ll walk you through the steps to troubleshoot a 2017 Ford Expedition backup camera that is not working. We’ll cover everything from checking the fuses to replacing the camera itself. By the end of this guide, you’ll be able to get your backup camera up and running again.

Reasons Why 2017 Ford Expedition Back Up Camera Not Working

Here are the reasons:

Back up camera fuse blown

The most common cause of a back up camera not working is a blown fuse.
To check the fuse, look in the fuse box under the hood.
The fuse for the back up camera is usually labeled Camera or Backup Camera.
If the fuse is blown, replace it with a new fuse of the same amperage.

Back up camera wiring damaged

The back up camera wiring can be damaged if the vehicle is in an accident.
The wiring can also be damaged if it is pinched or rubbed against a sharp object.
To check the wiring, look for any damage or signs of corrosion.
If the wiring is damaged, it will need to be repaired or replaced.

Back up camera module malfunction

The back up camera module can malfunction if it is subjected to too much heat or moisture.
The module can also malfunction if it is not properly installed.
To check the module, connect a diagnostic tool to the vehicle and check for any codes.
If there are any codes, they will help you identify the problem.

Back up camera screen malfunction

The back up camera screen can malfunction if it is damaged or if the connection is loose.
To check the screen, look for any damage or signs of corrosion.
If the screen is damaged, it will need to be replaced.
If the connection is loose, reconnect it and see if the problem is resolved.

How to Troubleshoot: 2017 Ford Expedition Backup Camera Not Working

Your 2017 Ford Expedition’s backup camera is a valuable safety feature that helps you see behind your vehicle when backing up. If your backup camera is not working, it can be a major inconvenience. This guide will help you troubleshoot the problem and get your backup camera working again.

Possible Causes

There are a number of possible causes for a 2017 Ford Expedition backup camera not working. Some of the most common causes include:

A loose or damaged wiring harness: The backup camera wiring harness is located behind the rear bumper. If the wiring harness is loose or damaged, it can cause the backup camera to stop working.

A faulty backup camera module: The backup camera module is located in the rear of the vehicle. If the backup camera module is faulty, it can also cause the backup camera to stop working.

A faulty backup camera display: The backup camera display is located in the rearview mirror. If the backup camera display is faulty, it can also cause the backup camera to stop working.

Troubleshooting Steps

To troubleshoot the problem with your 2017 Ford Expedition backup camera, follow these steps:

1. Check the wiring harness: First, check the wiring harness behind the rear bumper to make sure it is not loose or damaged. If the wiring harness is loose, reconnect it. If the wiring harness is damaged, you will need to have it repaired or replaced.

2. Check the backup camera module: Next, check the backup camera module in the rear of the vehicle. To do this, you will need to remove the rear bumper cover. Once you have removed the rear bumper cover, you will be able to access the backup camera module. Inspect the backup camera module for any signs of damage. If the backup camera module is damaged, you will need to have it repaired or replaced.3. Check the backup camera display: Finally, check the backup camera display in the rearview mirror. To do this, you will need to remove the rearview mirror. Once you have removed the rearview mirror, you will be able to access the backup camera display. Inspect the backup camera display for any signs of damage. If the backup camera display is damaged, you will need to have it repaired or replaced.

Resetting the Backup Camera

If you have checked the wiring harness, backup camera module, and backup camera display and you are still having problems, you can try resetting the backup camera. To reset the backup camera, follow these steps:

1. Turn off the ignition.
2. Disconnect the negative battery terminal.
3. Wait for 10 seconds.
4. Reconnect the negative battery terminal.
5. Turn on the ignition.

The backup camera should now be reset. If the backup camera is still not working, you will need to have it repaired or replaced.

Contacting a Mechanic

If you are unable to troubleshoot the problem with your 2017 Ford Expedition backup camera, you should contact a mechanic. A mechanic will be able to diagnose the problem and repair or replace the necessary parts.

Also Read: 2017 Ford Expedition Backup Camera Not Working

FAQs: 2017 Ford Expedition Backup Camera Not Working

Why is my 2017 Ford Expedition backup camera not working?

There are a few possible reasons why your 2017 Ford Expedition backup camera may not be working. Here are a few of the most common causes:

The camera is damaged: If the camera itself is damaged, it will not be able to produce a clear image. This could be caused by a physical impact, such as a rock hitting the camera, or by water damage.

The camera cable is damaged: The camera cable is responsible for sending the video signal from the camera to the display screen. If the cable is damaged, the camera will not be able to produce a clear image.

The camera is not properly connected: The camera must be properly connected to the vehicle’s electrical system in order to work properly. If the camera is not connected correctly, it will not be able to produce a clear image.

The camera is not turned on: The camera must be turned on in order to produce a clear image. If the camera is not turned on, it will not work.

How do I fix my 2017 Ford Expedition backup camera?

To fix your 2017 Ford Expedition backup camera, you will need to identify the cause of the problem. Once you have identified the cause, you can take the necessary steps to fix it. Here are some tips on how to fix a 2017 Ford Expedition backup camera:

Check the camera for damage: If the camera is damaged, you will need to replace it.

Check the camera cable for damage: If the cable is damaged, you will need to replace it.

Check the camera connection: Make sure that the camera is properly connected to the vehicle’s electrical system.

Turn on the camera: Make sure that the camera is turned on.

What are the symptoms of a bad 2017 Ford Expedition backup camera?

There are a few symptoms that you may notice if your 2017 Ford Expedition backup camera is bad. Here are a few of the most common symptoms:

The camera does not produce a clear image: The image may be blurry, pixelated, or distorted.

The camera is not working at all: The camera may not turn on, or it may turn on but not produce an image.

The camera is flashing: The camera may flash on and off, or it may flash a warning message.

How much does it cost to fix a 2017 Ford Expedition backup camera?

The cost of fixing a 2017 Ford Expedition backup camera will vary depending on the cause of the problem. If the camera is damaged, you will need to replace it. The cost of a new camera will typically range from $100 to $200. If the camera cable is damaged, you will need to replace it. The cost of a new cable will typically range from $50 to $100. If the camera is not properly connected, you will need to have a mechanic reconnect it. The cost of this service will typically range from $50 to $100.

What can I do to prevent my 2017 Ford Expedition backup camera from breaking?

There are a few things you can do to prevent your 2017 Ford Expedition backup camera from breaking. Here are a few tips:

Park carefully: When backing up, be sure to park slowly and carefully. This will help to avoid damaging the camera.

Avoid objects: When backing up, be sure to avoid objects that could damage the camera. This includes trees, poles, and other vehicles.

Keep the camera clean: Be sure to keep the camera clean by wiping it down with a dry cloth. This will help to prevent dirt and debris from building up on the camera and causing damage.