2017 Ford Expedition Backup Camera Not Working: Here’s the Fix

Your 2017 Ford Expedition’s backup camera is a valuable safety feature, but it can be frustrating when it stops working. There are a few common causes for this issue, and most of them are relatively easy to fix. In this guide, we’ll walk you through the steps to troubleshoot and repair your Expedition’s backup camera.

We understand how frustrating it can be when your backup camera isn’t working. Not only is it a safety hazard, but it can also be a major inconvenience. That’s why we’ve put together this guide to help you troubleshoot and repair the issue.

Reasons Why 2017 Ford Expedition Backup Camera Not Working

Here are the reasons:

Backup Camera Not Working

Backup camera is not plugged in properly:
Check the connection between the backup camera and the vehicle’s electrical system. Make sure that the connector is securely plugged into both the camera and the vehicle.

Backup camera is damaged:
The backup camera may be damaged if it was hit by something, such as a rock or a tree branch. If the camera is damaged, it will need to be replaced.

Backup camera fuse is blown:
The backup camera fuse may be blown if there was a sudden surge in power to the camera. Check the fuse box and replace the fuse if it is blown.

Backup camera wiring is damaged:
The backup camera wiring may be damaged if it was pinched or cut. If the wiring is damaged, it will need to be repaired or replaced.

Backup camera software is corrupted:
The backup camera software may be corrupted if the vehicle’s computer was updated incorrectly. In this case, the software will need to be reflashed.

2017 Ford Expedition Backup Camera Not Working

Symptoms

There are a few different symptoms that you may experience if your 2017 Ford Expedition backup camera is not working. These include:

The backup camera image does not appear on the infotainment screen when you shift into reverse.
The backup camera image is distorted or pixelated.
The backup camera image is not aligned properly with the rear of the vehicle.
The backup camera does not turn on automatically when you shift into reverse.
The backup camera turns on, but then turns off again shortly after.

Causes

There are a number of different things that could cause your 2017 Ford Expedition backup camera to stop working. These include:

A faulty backup camera.
A faulty backup camera wiring harness.
A faulty backup camera fuse.
A problem with the infotainment system.
A problem with the vehicle’s electrical system.

Troubleshooting

If your 2017 Ford Expedition backup camera is not working, you can troubleshoot the issue by following these steps:

1. Check the backup camera fuse:
The backup camera fuse is located in the vehicle’s fuse box. To check the fuse, remove it from the fuse box and inspect it for damage. If the fuse is blown, replace it with a new fuse of the same amperage.

2. Check the backup camera wiring harness:
The backup camera wiring harness connects the backup camera to the vehicle’s electrical system. To check the wiring harness, inspect it for damage or corrosion. If the wiring harness is damaged, you will need to replace it.3. Check the infotainment system:
The infotainment system is responsible for displaying the backup camera image on the screen. To check the infotainment system, turn on the vehicle and shift into reverse. If the backup camera image does not appear on the screen, you may need to reset the infotainment system.

4. Check the vehicle’s electrical system:
If the backup camera is not working and you have checked all of the other possible causes, you may have a problem with the vehicle’s electrical system. To troubleshoot this issue, you will need to take your vehicle to a qualified mechanic.

Repairing the Backup Camera

If you have determined that the backup camera is faulty, you will need to have it repaired or replaced. You can have the backup camera repaired by a qualified mechanic or you can replace it yourself. If you choose to replace the backup camera yourself, you can find replacement backup cameras online or at your local auto parts store.

Preventative Maintenance

There are a few things you can do to help prevent your 2017 Ford Expedition backup camera from malfunctioning. These include:

Keep the backup camera clean.
Avoid driving over bumps or potholes.
Avoid exposing the backup camera to extreme heat or cold.
If you notice any damage to the backup camera or the wiring harness, have it repaired or replaced as soon as possible.

By following these tips, you can help keep your 2017 Ford Expedition backup camera working properly for many years to come.

Also Read: 2017 Ford Expedition Blower Motor Not Working

2017 Ford Expedition Backup Camera Not Working FAQs

Why is my 2017 Ford Expedition backup camera not working?

There are a few possible reasons why your 2017 Ford Expedition backup camera may not be working. Here are some of the most common causes:

The camera is dirty: The backup camera is located on the rear of your vehicle, and it can easily get dirty from road grime, dust, and debris. If the camera is dirty, it may not be able to properly capture images. To clean the camera, use a soft cloth and some water. Be careful not to use any harsh chemicals or cleaners, as these can damage the camera.

The camera is damaged: The backup camera is a delicate piece of equipment, and it can be damaged if it is hit by something. If the camera is damaged, it will need to be replaced.

The camera cable is damaged: The backup camera cable is a long, thin cable that connects the camera to the vehicle’s computer. If the cable is damaged, it can cause the camera to stop working. If you suspect that the cable is damaged, you should have it inspected by a qualified technician.

The vehicle’s computer is not properly configured: The backup camera is controlled by the vehicle’s computer. If the computer is not properly configured, it may not be able to communicate with the camera. If you suspect that the computer is not properly configured, you should have it inspected by a qualified technician.

How do I fix my 2017 Ford Expedition backup camera?

If your 2017 Ford Expedition backup camera is not working, you can try the following steps to fix it:

1. Check the camera for dirt and debris: If the camera is dirty, clean it with a soft cloth and some water.
2. Check the camera for damage: If the camera is damaged, it will need to be replaced.
3. Check the camera cable for damage: If the cable is damaged, it will need to be replaced.
4. Have the vehicle’s computer inspected: If the computer is not properly configured, it may not be able to communicate with the camera.

If you are unable to fix the backup camera yourself, you should have it inspected by a qualified technician.

What are the symptoms of a bad backup camera?

If your 2017 Ford Expedition backup camera is bad, you may experience the following symptoms:

The camera image is blurry or distorted.
The camera image is not displayed at all.
The camera image freezes or flickers.
The camera makes a buzzing or humming noise.

If you experience any of these symptoms, you should have your backup camera inspected by a qualified technician.

How much does it cost to fix a 2017 Ford Expedition backup camera?

The cost of repairing a 2017 Ford Expedition backup camera can vary depending on the cause of the problem. If the camera is dirty, cleaning it will be free. If the camera is damaged, it will need to be replaced. The cost of replacing a backup camera can range from $100 to $300. If the camera cable is damaged, it will also need to be replaced. The cost of replacing a camera cable can range from $50 to $100. If the vehicle’s computer is not properly configured, it will need to be inspected and repaired. The cost of repairing a computer can range from $100 to $300.

How can I prevent my 2017 Ford Expedition backup camera from breaking?

There are a few things you can do to prevent your 2017 Ford Expedition backup camera from breaking:

Keep the camera clean: Dirt and debris can damage the camera lens, so it is important to keep the camera clean.

Avoid hitting the camera: The backup camera is a delicate piece of equipment, so it is important to avoid hitting it with anything.

Have the camera inspected regularly: If you notice any problems with the camera, have it inspected by a qualified technician.

By following these tips, you can help to prevent your 2017 Ford Expedition backup camera from breaking.