2017 Ford Expedition Key Fob Not Working: 5 Ways to Fix It

Do you have a 2017 Ford Expedition whose key fob isn’t working You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a fix.

In this guide, I’ll walk you through the steps to troubleshoot and fix a 2017 Ford Expedition key fob that’s not working. I’ll cover everything from simple fixes like replacing the battery to more complex repairs like reprogramming the key fob.

So if you’re ready to get your key fob working again, let’s get started.

Reasons Why 2017 Ford Expedition Key Fob Not Working

Here are the reasons:

Dead battery

The most common reason for a key fob not working is a dead battery. The key fob battery is a small, round, flat battery that is located inside the key fob. To check the battery, open the key fob and look for a small, round, flat battery. If the battery is bulging, leaking, or corroded, it needs to be replaced.

Damaged key fob

Another common reason for a key fob not working is damage to the key fob itself. The key fob can be damaged if it is dropped, submerged in water, or exposed to extreme heat or cold. If the key fob is damaged, it may need to be replaced.

Interference from other devices

In some cases, a key fob may not work properly due to interference from other devices. This can be caused by other electronic devices that use the same frequency as the key fob, such as a wireless router or baby monitor. If you think interference may be the cause of the problem, try moving the key fob away from other electronic devices.

Software problem

In rare cases, a key fob may not work properly due to a software problem. This can happen if the key fob’s software is corrupted or outdated. If you think a software problem may be the cause of the problem, you can try resetting the key fob or updating the software.

How to Troubleshoot: 2017 Ford Expedition Key Fob Not Working

Your 2017 Ford Expedition key fob is an essential part of your vehicle. It allows you to lock and unlock the doors, start the engine, and open the tailgate. If your key fob stops working, you may be left stranded.

There are a few things you can check to troubleshoot the problem. First, make sure that the batteries in the key fob are not dead. If they are, replace them with new batteries.

If the batteries are not the problem, you may need to reprogram the key fob. This is a relatively simple process that can be done at home.

How to Check the Batteries

To check the batteries in your key fob, follow these steps:

1. Remove the key fob from your keychain.
2. Locate the battery compartment on the back of the key fob.
3. Use a small coin or flathead screwdriver to pry open the battery compartment.
4. Remove the old batteries.
5. Insert two new batteries, making sure that the positive and negative terminals are aligned correctly.
6. Close the battery compartment.

How to Reprogram the Key Fob

To reprogram the key fob, follow these steps:

1. Insert the key fob into the ignition and turn it to the ON position.
2. Press and hold the lock button on the key fob for five seconds.
3. The car’s horn will honk and the lights will flash to confirm that the key fob has been programmed.
4. Remove the key fob from the ignition.

Troubleshooting Tips

If you have tried the above steps and your key fob is still not working, there may be a more serious problem. Here are a few troubleshooting tips:

Check the fuses in your vehicle’s fuse box. If a fuse is blown, replace it with a new fuse.
Try resetting the vehicle’s computer. This can be done by disconnecting the battery for a few minutes and then reconnecting it.
Take your vehicle to a qualified mechanic for diagnosis and repair.

Conclusion

Your 2017 Ford Expedition key fob is an important part of your vehicle. If it stops working, you may be left stranded. By following the steps in this article, you can troubleshoot the problem and get your key fob working again.

Also Read: 2017 Ford Expedition Remote Start Not Working

Frequently Asked Questions about 2017 Ford Expedition Key Fob Not Working

1. Why is my 2017 Ford Expedition key fob not working?

The key fob may not be working due to a dead battery. Try replacing the battery to see if that resolves the issue. If the problem persists
there may be a fault with the key fob itself
and it may need to be reprogrammed or replaced.

2. How can I reprogram my 2017 Ford Expedition key fob?

To reprogram your key fob
you may need to follow specific steps outlined in your vehicle’s manual. Typically
the process involves entering a programming mode in the vehicle and then following a sequence of button presses on the key fob to sync it with the car’s system.

3. What should I do if my 2017 Ford Expedition key fob is lost or stolen?

If your key fob is lost or stolen
it’s essential to take immediate action to secure your vehicle. Contact a Ford dealership or a qualified automotive locksmith to have the key fob deactivated from your vehicle’s system and get a replacement fob if necessary.

4. Can a damaged key fob cause other issues with my 2017 Ford Expedition?

A damaged key fob may not directly cause other issues with your vehicle
but it can lead to inconvenience and potential security concerns. It’s best to address key fob problems promptly to ensure smooth operation of your vehicle’s locking and security system.

5. Is it possible to fix a malfunctioning 2017 Ford Expedition key fob on my own?

Some key fob issues
such as battery replacement or reprogramming
can be addressed by following the instructions in your vehicle’s manual. However
more complex problems may require professional assistance from a Ford dealership or an automotive locksmith.