Fix Your 2017 Ford Expedition Remote Start in 60 Seconds!

Do you own a 2017 Ford Expedition and are experiencing problems with the remote start If so, you’re not alone. This is a common issue that can be frustrating and inconvenient. But don’t worry, there is a solution. In this guide, we will walk you through the steps to troubleshoot the problem and get your remote start working again.

Reasons Why 2017 Ford Expedition Remote Start Not Working

Here are the reasons:

1. Dead battery

The most common reason for a remote start not working is a dead battery. If the battery is too low, the remote start will not be able to power the car’s computer and send the signal to start the engine.

2. Faulty remote start system

If the remote start system itself is faulty, it will not be able to send the signal to start the car’s engine. This could be due to a problem with the remote, the receiver, or the wiring.

3. Immobilizer system

If the immobilizer system is activated, it will prevent the car from starting even if the remote start system is working properly. This is a security feature that prevents unauthorized people from starting the car.

4. Transmission range

The remote start system may not work if the car is too far away from the transmitter. The transmitter needs to be within a certain range of the car in order to send the signal to start the engine.

5. Other electrical problems

There could be other electrical problems that are preventing the remote start system from working. These problems could include a bad fuse, a loose connection, or a short circuit.

How to Troubleshoot: 2017 Ford Expedition Remote Start Not Working

Your 2017 Ford Expedition’s remote start feature is a convenient way to warm up your vehicle on a cold day or cool it down on a hot one. However, if your remote start isn’t working, it can be a major inconvenience.

There are a few things that could be causing your remote start not to work. In this article, we’ll walk you through the steps to troubleshoot the problem and get your remote start working again.

Step 1: Check the battery in your remote

The first thing you should check is the battery in your remote. If the battery is low, it may not be able to send a strong enough signal to your vehicle’s computer.

To check the battery, remove the back cover of your remote. Inside, you’ll see a small battery. Use a coin to pry the battery out of its slot.

If the battery is corroded or damaged, replace it with a new one. Once you’ve installed the new battery, test your remote start to see if the problem is resolved.

Step 2: Check the range of your remote

The next thing you should check is the range of your remote. The remote start feature on your Expedition uses a radio signal to communicate with your vehicle’s computer. If you’re too far away from your vehicle, the signal may not be strong enough to reach.

To test the range of your remote, try starting your vehicle from different locations in your driveway. If you can’t start your vehicle from a distance of 50 feet or more, the problem may be with the range of your remote.

You can increase the range of your remote by moving it higher up. For example, try putting it on your dashboard or sun visor. You can also try aiming the remote directly at your vehicle’s antenna.

Step 3: Check the programming of your remote

If your remote start isn’t working, it may be because the remote is not programmed correctly.

To program your remote, you’ll need to follow the instructions in your Expedition’s owner’s manual. The process is usually very simple, but it can vary depending on the year and model of your vehicle.

If you’re not sure how to program your remote, you can take your vehicle to a Ford dealer. They can program your remote for you in a matter of minutes.

Step 4: Check the fuses in your Expedition

If your remote start isn’t working, it could be because a fuse has blown.

To check the fuses, open the fuse box in your Expedition. The fuse box is usually located under the hood or in the passenger compartment.

Each fuse is labeled with a number and a description. Find the fuse that’s labeled Remote Start or Remote Entry. Check the fuse to see if it’s blown. If the fuse is blown, replace it with a new one.

Once you’ve replaced the fuse, test your remote start to see if the problem is resolved.

Step 5: Take your Expedition to a Ford dealer

If you’ve tried all of the steps above and your remote start still isn’t working, it’s time to take your Expedition to a Ford dealer.

A Ford dealer can diagnose the problem and repair it quickly and efficiently.

Conclusion

Your 2017 Ford Expedition’s remote start feature is a convenient feature, but it can be frustrating when it’s not working. By following the steps in this article, you can troubleshoot the problem and get your remote start working again.

If you’re unable to fix the problem yourself, take your Expedition to a Ford dealer. They can diagnose the problem and repair it quickly and efficiently.

Also Read: 2017 Ford Expedition Sync Not Working

FAQs: 2017 Ford Expedition Remote Start Not Working

Why is my 2017 Ford Expedition remote start not working?

There are a few possible reasons why your 2017 Ford Expedition remote start may not be working. Here are some of the most common causes:

The battery in your remote is dead: This is the most common cause of a remote start not working. Check the battery in your remote and replace it if it is dead.

The remote is out of range: The remote start system has a limited range, so make sure that you are within range of your vehicle when you try to start it remotely.

The remote is not programmed correctly: The remote start system must be programmed to your vehicle’s specific VIN number. If the remote is not programmed correctly, it will not work.

The vehicle’s battery is dead: If the vehicle’s battery is dead, the remote start system will not be able to start the vehicle.

The vehicle’s starter is defective: If the vehicle’s starter is defective, it will not be able to start the vehicle, even if the remote start system is working properly.

How do I fix my 2017 Ford Expedition remote start?

If your 2017 Ford Expedition remote start is not working, there are a few things you can try to fix it. Here are some of the most common solutions:

Replace the battery in your remote: This is the most common solution to a remote start not working. If the battery in your remote is dead, replace it with a new battery and try starting your vehicle remotely again.

Move closer to your vehicle: The remote start system has a limited range, so make sure that you are within range of your vehicle when you try to start it remotely.

Reprogram the remote: If the remote start system is not programmed correctly, it will not work. To reprogram the remote, you will need to follow the instructions in your vehicle’s owner’s manual.

Charge the vehicle’s battery: If the vehicle’s battery is dead, the remote start system will not be able to start the vehicle. Charge the battery and try starting your vehicle remotely again.

Have the vehicle’s starter checked: If the vehicle’s starter is defective, it will not be able to start the vehicle, even if the remote start system is working properly. Have the starter checked by a qualified technician.

What are the benefits of having a remote start system on my 2017 Ford Expedition?

There are a number of benefits to having a remote start system on your 2017 Ford Expedition. Here are some of the most common benefits:

Convenience: A remote start system allows you to start your vehicle from anywhere within range of the remote. This can be a great convenience, especially on cold mornings or hot days.

Security: A remote start system can help to deter theft. If a thief sees that your vehicle is running, they are less likely to try to steal it.

Fuel efficiency: A remote start system can help to improve fuel efficiency. When you start your vehicle remotely, the engine warms up while it is still in park. This allows the engine to reach its optimal operating temperature more quickly, which can improve fuel efficiency.

Comfort: A remote start system can help to make your vehicle more comfortable. When you start your vehicle remotely, the cabin will be warm or cool (depending on your climate) by the time you get inside. This can be a great convenience, especially on cold or hot days.

How much does a remote start system cost for a 2017 Ford Expedition?

The cost of a remote start system for a 2017 Ford Expedition can vary depending on the type of system you choose. A basic system will typically cost around $200, while a more advanced system with features like climate control and smartphone integration can cost up to $500.

Where can I get a remote start system installed for my 2017 Ford Expedition?

You can get a remote start system installed for your 2017 Ford Expedition at a number of different locations. Some dealerships offer remote start installation services, as do many independent auto repair shops. You can also find remote start systems online and have them installed by a qualified technician.