2017 Ford Expedition Sync Not Working: Here’s the Fix!

Do you own a 2017 Ford Expedition and are experiencing problems with your Sync system You’re not alone. This is a common issue that can be frustrating and inconvenient. But don’t worry, there is a solution.

In this guide, we will walk you through the steps to troubleshoot and fix your Sync system. We will cover everything from simple resets to more complex repairs. By the end of this guide, you will have your Sync system up and running again.

So if you’re ready to get started, let’s do it!

Reasons Why 2017 Ford Expedition Sync Not Working

Here are the reasons:

Possible Causes

Sync module failure: The sync module is the main computer that controls the infotainment system. If it fails, the entire system will be disabled.

Wiring issue: The sync module is connected to the vehicle’s electrical system by a series of wires. If any of these wires are damaged or disconnected, the sync module will not be able to communicate with the rest of the vehicle’s systems.

Software issue: The sync module’s software can become corrupted or outdated, which can cause it to malfunction.

Radio interference: The sync module can be affected by radio interference from other devices, such as cell phones or CB radios.

Other causes: There are a number of other potential causes of sync problems, such as a faulty battery or alternator, a loose connection, or a problem with the vehicle’s computer.

How to Troubleshoot: 2017 Ford Expedition Sync Not Working

Sync is a popular infotainment system that is found in many Ford vehicles. It allows drivers to control their music, navigation, and other features using voice commands or the touchscreen. However, Sync can sometimes malfunction, which can be a frustrating experience.

If your 2017 Ford Expedition Sync is not working, there are a few things you can do to troubleshoot the problem. In this article, we will walk you through the steps to diagnose and fix a Sync issue.

Step 1: Check the fuses

The first thing you should do is check the fuses for the Sync system. The fuses are located in the fuse box under the hood of your vehicle.

To check the fuses, you will need a fuse puller. You can find a fuse puller at most auto parts stores.

Once you have the fuse puller, open the fuse box and locate the fuses for the Sync system. The fuses are usually labeled SYNC or Audio.

Remove each fuse and inspect it for damage. If the fuse is blown, replace it with a new fuse of the same amperage.

Once you have replaced the fuses, start your vehicle and try to use Sync again. If the problem persists, move on to the next step.

Step 2: Reset Sync

If the fuses are not blown, you can try resetting Sync. To reset Sync, follow these steps:

1. Turn off the ignition.
2. Press and hold the Power button on the Sync system for 10 seconds.
3. Release the Power button.
4. Turn on the ignition.

Sync should now be reset. If the problem persists, move on to the next step.

Step 3: Update Sync

There may be a software update available for your Sync system. To check for an update, follow these steps:

1. Turn on the ignition.
2. Press the Settings button on the Sync system.
3. Select System.
4. Select Software Update.
5. Follow the on-screen instructions to check for an update.

If there is an update available, install it following the on-screen instructions.

Once the update is installed, start your vehicle and try to use Sync again. If the problem persists, move on to the next step.

Step 4: Take your vehicle to a dealer

If you have tried all of the above steps and Sync is still not working, you will need to take your vehicle to a dealer. The dealer will be able to diagnose the problem and repair it.

Conclusion

Sync is a great infotainment system, but it can sometimes malfunction. By following the steps in this article, you can troubleshoot most Sync issues. However, if you are unable to fix the problem yourself, you will need to take your vehicle to a dealer.

Also Read: 2017 Ford Expedition Touch Screen Not Working

FAQs: 2017 Ford Expedition Sync Not Working

Why is my 2017 Ford Expedition Sync not working?

There are a few possible reasons why your 2017 Ford Expedition Sync may not be working. Here are some of the most common causes:

The Sync system is not properly connected to your vehicle: Make sure that the Sync system is plugged into the correct port in your vehicle and that the connection is secure.

The Sync system is not updated to the latest software: Check to see if there is a software update available for your Sync system. You can do this by following the instructions in your owner’s manual.

The Sync system is experiencing a glitch: If you have tried the above solutions and your Sync system is still not working, you may need to reset the system. You can do this by following the instructions in your owner’s manual.

The Sync system is damaged: If you have tried all of the above solutions and your Sync system is still not working, it may be damaged. You will need to take your vehicle to a Ford dealer to have the Sync system repaired or replaced.

How do I reset my 2017 Ford Expedition Sync system?

To reset your 2017 Ford Expedition Sync system, follow these steps:

1. Turn off the ignition.
2. Press and hold the power button on the Sync system for 10 seconds.
3. The Sync system will turn off and then back on.
4. The Sync system will be reset.

How do I update my 2017 Ford Expedition Sync system?

To update your 2017 Ford Expedition Sync system, follow these steps:

1. Connect your vehicle to a Wi-Fi network.
2. Open the Sync system menu.
3. Select Settings.
4. Select System Updates.
5. Follow the on-screen instructions to update your Sync system.

What are the features of the 2017 Ford Expedition Sync system?

The 2017 Ford Expedition Sync system includes a variety of features, including:

Bluetooth connectivity
Voice control
Navigation
AppLink
SiriusXM Satellite Radio
HD Radio

How much does the 2017 Ford Expedition Sync system cost?

The 2017 Ford Expedition Sync system is included as standard equipment on all models.