2019 Ford Expedition Liftgate Button Not Working: Here’s the Fix!

The liftgate button on your 2019 Ford Expedition is one of the most convenient features, but it can be frustrating when it stops working. There are a few common causes for this issue, and most of them are easy to fix. In this guide, we’ll walk you through the steps to troubleshoot the problem and get your liftgate button working again.

What’s the Problem

The liftgate button on your Expedition may not be working for a number of reasons. Here are some of the most common

The button is stuck. This can happen if something is blocking the button or if the button itself is damaged.
The wiring is damaged. The wiring that connects the liftgate button to the liftgate motor may be damaged, causing the button to not work.
The liftgate motor is faulty. The liftgate motor may be faulty, causing the liftgate to not open or close when you press the button.

How to Troubleshoot the Problem

To troubleshoot the problem, you’ll need to first identify the cause. Here are the steps to take

1. Inspect the liftgate button. Look for anything that might be blocking the button or causing it to stick. If you see anything, remove it and try the button again.
2. Check the wiring. Inspect the wiring that connects the liftgate button to the liftgate motor. Look for any damage or corrosion. If you see any damage, repair or replace the wiring.
3. Test the liftgate motor. Use a multimeter to test the liftgate motor. If the motor is not working, replace it.

Reasons Why 2019 Ford Expedition Liftgate Button Not Working

Here are the reasons:

1. Faulty liftgate button

The liftgate button may be faulty due to a loose connection, a broken wire, or a damaged switch. To test the liftgate button, you can use a multimeter to check for continuity between the button and the liftgate motor. If there is no continuity, the button is faulty and needs to be replaced.

2. Faulty liftgate motor

The liftgate motor may be faulty due to a bad bearing, a seized gear, or a burned-out winding. To test the liftgate motor, you can use a multimeter to check for continuity between the motor and the battery. If there is no continuity, the motor is faulty and needs to be replaced.

3. Faulty liftgate wiring

The liftgate wiring may be damaged due to a pinched wire, a broken wire, or a corrosion. To test the liftgate wiring, you can use a multimeter to check for continuity between the liftgate button and the liftgate motor. If there is no continuity, the wiring is faulty and needs to be repaired or replaced.

How to Troubleshoot: 2019 Ford Expedition Liftgate Button Not Working

The liftgate button on your 2019 Ford Expedition is a convenient way to open and close the back of your vehicle. However, if the button stops working, it can be a major inconvenience. There are a few things you can check to troubleshoot the issue and get your liftgate working again.

Step 1: Check the fuses

The first thing you should do is check the fuses for the liftgate. The fuses are located in the fuse box under the hood. There should be a fuse labeled Liftgate or Liftgate Control. Remove the fuse and check to see if it is blown. If the fuse is blown, replace it with a new one.

Step 2: Check the wiring

If the fuse is not blown, the next thing you should check is the wiring for the liftgate. The wiring is located in the tailgate itself. You can check the wiring for damage or corrosion. If you find any damage, you will need to repair or replace the wiring.

Step 3: Test the liftgate motor

If the wiring is not damaged, the next thing you should do is test the liftgate motor. The liftgate motor is located in the tailgate. You can test the motor by connecting a jumper wire between the positive and negative terminals of the motor. If the motor turns on, the motor is working properly. If the motor does not turn on, you will need to replace the motor.

Step 4: Reset the liftgate computer

If you have checked the fuses, wiring, and motor and the liftgate is still not working, you can try resetting the liftgate computer. To reset the liftgate computer, you will need to disconnect the battery for a few minutes. Once you have reconnected the battery, the liftgate computer should be reset.

Conclusion

If you have followed these steps and the liftgate is still not working, you will need to take your vehicle to a qualified mechanic. The mechanic will be able to diagnose the issue and make the necessary repairs.

Also Read: 2020 Ford Expedition Alarm Keeps Going Off

FAQs: 2019 Ford Expedition Liftgate Button Not Working

Why is my 2019 Ford Expedition liftgate button not working?

There are a few possible reasons why your 2019 Ford Expedition liftgate button may not be working.

The button may be stuck: Try pressing the button firmly and see if it works. If it does not, you may need to clean the button or replace it.

The button may be damaged: If the button is cracked or broken, it will need to be replaced.

The wiring to the button may be damaged: If the wiring is damaged, it will need to be repaired or replaced.

The liftgate motor may be damaged: If the liftgate motor is damaged, it will need to be replaced.

How do I fix my 2019 Ford Expedition liftgate button?

If your 2019 Ford Expedition liftgate button is not working, you can try the following steps to fix it:

1. Check the button: Make sure that the button is not stuck or damaged. If it is, you may need to clean the button or replace it.
2. Check the wiring: Inspect the wiring to the button for damage. If the wiring is damaged, you will need to repair or replace it.
3. Check the liftgate motor: If the liftgate motor is damaged, you will need to replace it.

How much does it cost to fix a 2019 Ford Expedition liftgate button?

The cost of fixing a 2019 Ford Expedition liftgate button will vary depending on the cause of the problem. If the button is stuck or damaged, it will typically cost between $50 and $100 to fix. If the wiring is damaged, it will typically cost between $100 and $200 to fix. If the liftgate motor is damaged, it will typically cost between $200 and $400 to fix.

Can I fix my 2019 Ford Expedition liftgate button myself?

In some cases, you may be able to fix your 2019 Ford Expedition liftgate button yourself. However, if the problem is more serious, such as a damaged wiring or liftgate motor, it is best to take your vehicle to a qualified mechanic.

What should I do if my 2019 Ford Expedition liftgate button is not working?

If your 2019 Ford Expedition liftgate button is not working, you should take the following steps:

1. Try to fix the problem yourself: If you are comfortable working on cars, you can try to fix the problem yourself by following the steps above.
2. Take your vehicle to a qualified mechanic: If you are not comfortable working on cars, or if you have tried to fix the problem yourself and it has not worked, you should take your vehicle to a qualified mechanic.