Your Ford Expedition Liftgate Isn’t Working? Here’s How to Fix It!

There’s nothing more frustrating than trying to open your Ford Expedition’s liftgate, only to find that the button isn’t working. This is a common problem, and it can be caused by a variety of issues. In this guide, we’ll walk you through the steps to troubleshoot the problem and get your liftgate working again.

We’ll start by discussing the different causes of a liftgate button that isn’t working. Then, we’ll give you step-by-step instructions on how to diagnose and fix the problem. We’ll also provide some tips on how to prevent this problem from happening in the future.

So if you’re tired of dealing with a liftgate button that doesn’t work, read on! We’ll help you get it fixed in no time.

Reasons Why Ford Expedition Liftgate Button Not Working

Here are the reasons:

Bad or damaged liftgate button

The liftgate button on a Ford Expedition may not work if the button itself is damaged or defective. This can be caused by wear and tear, or by a physical impact that damages the button. To check if the button is the problem, try pressing it multiple times and see if the liftgate responds. If the button does not work, it will need to be replaced.

Faulty wiring

The liftgate button on a Ford Expedition is connected to the liftgate by a wiring harness. If the wiring harness is damaged or corroded, it can prevent the button from sending a signal to the liftgate motor. To check if the wiring is the problem, use a voltmeter to check for voltage at the liftgate button. If there is no voltage, the wiring harness will need to be repaired or replaced.

Faulty liftgate motor

The liftgate on a Ford Expedition is powered by a motor. If the motor is damaged or defective, it will not be able to raise or lower the liftgate. To check if the motor is the problem, try to manually raise or lower the liftgate. If the liftgate does not move, the motor will need to be replaced.

Faulty liftgate control module

The liftgate on a Ford Expedition is controlled by a control module. If the control module is damaged or defective, it may not be able to send the correct signals to the liftgate motor. To check if the control module is the problem, use a diagnostic scan tool to check for any codes. If there are any codes, they will help you identify the problem.

How to Troubleshoot: Ford Expedition Liftgate Button Not Working

The liftgate button on your Ford Expedition is a convenient way to open and close the back of your vehicle. However, if the button stops working, it can be a major inconvenience. There are a few different things that could be causing the problem, and it’s important to troubleshoot the issue so that you can get the liftgate working again.

Possible Causes

There are a few different things that could be causing the liftgate button on your Ford Expedition to stop working. These include:

A faulty liftgate button
A faulty liftgate switch
A faulty wiring harness
A problem with the liftgate motor

Troubleshooting Steps

To troubleshoot the issue, you’ll need to first identify the cause of the problem. Here are the steps to take:

1. Check the liftgate button:
Start by checking the liftgate button to see if it’s stuck or damaged. If the button is stuck, you can try to free it by using a small amount of lubricant. If the button is damaged, you’ll need to replace it.

2. Check the liftgate switch:
The liftgate switch is located in the trunk of your vehicle. It’s a small, black box with two wires attached to it. To check the switch, you’ll need to use a multimeter to test the continuity of the wires. If the wires are not connected or if the switch is not working properly, you’ll need to replace it.3. Check the wiring harness:
The wiring harness connects the liftgate button and switch to the liftgate motor. To check the wiring harness, you’ll need to use a multimeter to test for any breaks or shorts in the wires. If the wiring harness is damaged, you’ll need to replace it.

4. Check the liftgate motor:
The liftgate motor is located in the rear of your vehicle. It’s a small, electric motor that powers the liftgate. To check the motor, you’ll need to use a multimeter to test the voltage and current going to the motor. If the motor is not getting power or if it’s not working properly, you’ll need to replace it.

How to Fix the Problem

Once you’ve identified the cause of the problem, you can fix it by following the steps below:

1. To fix a faulty liftgate button, you’ll need to remove the old button and install a new one:
To remove the old button, you’ll need to pry it off of the panel. To install the new button, you’ll need to line it up with the holes in the panel and press it down until it snaps into place.

2. To fix a faulty liftgate switch, you’ll need to remove the old switch and install a new one:
To remove the old switch, you’ll need to disconnect the wires from it. To install the new switch, you’ll need to connect the wires to it and then secure it in place.3. To fix a faulty wiring harness, you’ll need to repair or replace the damaged wires:
To repair the wires, you’ll need to strip the insulation off of the ends of the wires and then twist them together. To replace the wires, you’ll need to cut the old wires and then splice in new wires.

4. To fix a faulty liftgate motor, you’ll need to remove the old motor and install a new one:
To remove the old motor, you’ll need to disconnect the wires from it and then remove the bolts that hold it in place. To install the new motor, you’ll need to connect the wires to it and then secure it in place.

Conclusion

By following these steps, you can troubleshoot and fix the liftgate button on your Ford Expedition. If you’re having trouble completing any of these steps, you can always take your vehicle to a qualified mechanic for help.

Also Read: Ford Expedition Liftgate Won’T Open

FAQs: Ford Expedition Liftgate Button Not Working

Why is my Ford Expedition liftgate button not working?

There are a few possible reasons why your Ford Expedition liftgate button may not be working.

The button may be defective: If the button is physically damaged, it may not be able to properly send a signal to the liftgate motor.

The wiring to the button may be damaged: If the wiring is damaged, it may not be able to properly transmit the signal from the button to the liftgate motor.

The liftgate motor may be defective: If the liftgate motor is defective, it may not be able to properly raise or lower the liftgate.

The liftgate control module may be defective: The liftgate control module is responsible for sending signals to the liftgate motor. If the control module is defective, it may not be able to properly communicate with the liftgate motor.

How do I fix my Ford Expedition liftgate button?

To fix your Ford Expedition liftgate button, you will need to identify the cause of the problem.

If the button is defective, you will need to replace the button.

If the wiring to the button is damaged, you will need to repair or replace the wiring.

If the liftgate motor is defective, you will need to replace the liftgate motor.

If the liftgate control module is defective, you will need to replace the liftgate control module.

How can I prevent my Ford Expedition liftgate button from breaking?

There are a few things you can do to prevent your Ford Expedition liftgate button from breaking.

Be careful not to drop or damage the button: The button is a delicate piece of equipment, and it can easily be damaged if it is dropped or struck.

Don’t press the button too hard: The button doesn’t need to be pressed very hard to work. Pressing it too hard can damage the button.

Keep the button clean: Dirt and debris can build up on the button and prevent it from working properly.

What should I do if my Ford Expedition liftgate button is still not working after I have tried to fix it?

If you have tried to fix your Ford Expedition liftgate button and it is still not working, you should take your vehicle to a qualified repair shop. The technicians at the repair shop will be able to diagnose the problem and properly fix it.

Where can I find more information about Ford Expedition liftgate buttons?

You can find more information about Ford Expedition liftgate buttons on the following websites:

[Ford Motor Company website](https://www.ford.com/)
[AutoZone website](https://www.autozone.com/)
[NAPA Auto Parts website](https://www.napaonline.com/)