Your Ford Expedition Remote Start Isn’t Working? Here’s Why!

Do you have a Ford Expedition that won’t start with the remote You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your Expedition up and running again.

Reasons Why Ford Expedition Remote Start Not Working

Here are the reasons:

Dead or Weak Battery

The most common reason for a Ford Expedition remote start not working is a dead or weak battery. The remote start system requires a good battery in order to function properly. If the battery is too weak, the remote start system may not be able to power up the vehicle’s engine.

Faulty Remote Start Module

The remote start module is a small computer that controls the remote start system. If the module is faulty, it may not be able to communicate with the vehicle’s computer or send the correct signals to start the engine.

Improper Installation

If the remote start system was not installed correctly, it may not work properly. This could be due to a number of factors, such as incorrect wiring, incorrect programming, or a faulty installation kit.

Interference from Other Devices

Some devices, such as wireless headphones, baby monitors, and cordless phones, can interfere with the remote start system. If you are experiencing interference, try turning off these devices and see if the remote start system starts working again.

Software Problems

The remote start system may also not work properly due to software problems. If you are experiencing problems with the remote start system, try updating the software to the latest version.

Physical Damage

The remote start system may not work properly if it has been damaged. This could be due to a collision, a flood, or other type of damage. If you suspect that the remote start system has been damaged, you should have it inspected by a qualified technician.

How to Troubleshoot: Ford Expedition Remote Start Not Working

Your Ford Expedition’s remote start is a convenient feature that allows you to start your vehicle from a distance, so it’s frustrating when it stops working. There are a few things you can check to troubleshoot the issue and get your remote start working again.

Step 1: Check the remote

The first thing you should do is check the remote itself. Make sure that the batteries are still good and that the remote is not damaged. You can also try pressing the buttons on the remote to see if they’re working properly.

Step 2: Check the vehicle

Next, you should check the vehicle itself. Make sure that the engine is off and that the doors are locked. You can also try pressing the start button on the vehicle to see if it works.

Step 3: Check the fuses

If the remote and the vehicle seem to be working properly, the next thing you should check is the fuses. The fuses for the remote start system are usually located in the fuse box under the hood. You can use a fuse tester to check the fuses and see if any of them are blown.

Step 4: Check the wiring

If the fuses are good, the next thing you should check is the wiring. The wiring for the remote start system is usually located under the hood and in the interior of the vehicle. You can use a voltmeter to check the wiring and see if there are any shorts or breaks.

Step 5: Take your vehicle to a mechanic

If you’ve checked the remote, the vehicle, the fuses, and the wiring and you still can’t figure out why your Ford Expedition’s remote start isn’t working, it’s time to take your vehicle to a mechanic. A mechanic can diagnose the problem and make the necessary repairs.

Conclusion

Your Ford Expedition’s remote start is a convenient feature, but it can be frustrating when it stops working. By following these troubleshooting steps, you can usually get your remote start working again. However, if you’re unable to fix the problem yourself, it’s best to take your vehicle to a mechanic.

Also Read: Ford Expedition Running Boards Not Working

FAQs: Ford Expedition Remote Start Not Working

Why is my Ford Expedition remote start not working?

There are a few possible reasons why your Ford Expedition remote start may not be working. Here are some of the most common causes:

The battery in your remote is dead: This is the most common cause of a remote start not working. Simply replace the battery and try again.

The remote is out of range: The remote start system uses a radio signal to communicate with your vehicle. If you’re too far away from your vehicle, the signal may not be strong enough to reach it. Try moving closer to your vehicle and try again.

The remote is damaged: If the remote is damaged, it may not be able to send a signal to your vehicle. Try using a different remote to see if that works.

The vehicle’s remote start system is malfunctioning: If the remote start system itself is malfunctioning, it may not be able to start your vehicle. You’ll need to take your vehicle to a dealership or qualified repair shop to have the system diagnosed and repaired.

How do I fix my Ford Expedition remote start?

If your Ford Expedition remote start is not working, you can try the following steps to fix it:

1. Check the battery in your remote: If the battery is dead, replace it and try again.
2. Move closer to your vehicle: If you’re too far away from your vehicle, the signal may not be strong enough to reach it. Try moving closer and try again.
3. Try using a different remote: If you have another remote that works with your vehicle, try using that one to see if it works.
4. Take your vehicle to a dealership or qualified repair shop: If the remote start system itself is malfunctioning, you’ll need to have it diagnosed and repaired by a professional.

What are the benefits of having a Ford Expedition remote start?

There are many benefits to having a Ford Expedition remote start, including:

Convenience: You can start your vehicle from anywhere within range of the remote, so you don’t have to get out in the cold or rain to warm it up.

Security: A remote start system can help deter theft, as it makes it more difficult for thieves to hot-wire your vehicle.

Fuel efficiency: A remote start system can help improve your fuel efficiency by allowing you to warm up your vehicle’s engine before you start driving.

How much does a Ford Expedition remote start cost?

The cost of a Ford Expedition remote start system varies depending on the features you choose. A basic system that simply starts your vehicle’s engine will typically cost around $200-$300. A more advanced system that includes features such as climate control and remote door locks can cost up to $1,000.

Where can I get a Ford Expedition remote start installed?

You can have a Ford Expedition remote start installed at a dealership, an authorized Ford service center, or an independent auto repair shop. The cost of installation will vary depending on the shop you choose and the features of the remote start system you select.