View Sentry Mode Events on Tesla: A Step-by-Step Guide

Sentry Mode is a security feature available in Tesla cars that uses external cameras to detect potential threats and notify the car owner via the Tesla Mobile App. Once a threat is detected, Sentry Mode can also record the surroundings to provide evidence of any incidents.

To access the recordings of Sentry Mode events on a Tesla, the driver can navigate to Controls > Safety > Dashcam > Dashcam Clips. It is recommended to check these clips frequently, even if no potential threats are detected. This article will explore the different types of recordings that can be obtained from Tesla Sentry Mode.

Where Do I View Sentry Mode Clips

If you’ve received a notification from the Sentry Mode in your Tesla through the mobile app and you want to view the recording clips, you’ll need to know where to find them. Luckily, it’s not too difficult to locate them. Before we explore how to find the clips, let’s first discuss what you need to store the recordings on.

The first thing you need is a Dashcam, which is already installed in every Tesla car model. However, it’s important to ensure that it’s enabled. The second thing you need is a properly formatted USB drive. The clips are stored in the USB flash drive.

To view the recordings, you need to navigate to the Dashcam clips. To get there, follow these simple steps:

1. Open the Tesla app on your phone.
2. Tap on the “Controls” option at the bottom of the screen.
3. Scroll down and tap on “Safety & Security”.
4. Tap on “Sentry Mode”.
5. Tap on “View Saved Events”.

Once you’ve followed these steps, you’ll be able to see the saved clips from the Sentry Mode. If you want to delete the clips, navigate to “Controls”, then to the “Safety & Security” bar, and there you will find the “Dashcam” option. Click on “Delete Dashcam Clips”, and all the clips will be gone at once.

It’s important to note that if Sentry Mode is turned on, you won’t be able to view the clips. You’ll need to turn it off to access the clips. Additionally, if you want to silence the security alarm and audio system when the alarm is triggered, navigate to “Controls” > “Safety & Security” > “Disable Sentry Sounds”.

In conclusion, finding and viewing the Sentry Mode clips is a straightforward process. By following the above steps, you’ll be able to access the saved clips from the Sentry Mode on your Tesla’s external cameras.

How to Watch the Sentry Footage on Your Tesla

If you own a Tesla, you might be wondering how to view the Sentry Mode events on your car. Luckily, it is a straightforward process that can be done on all Tesla models. In this section, we will explain how to view Sentry Mode events on Model X and Model 3.

How to View Sentry Mode Events Model X

To view the Sentry footage on your Tesla Model X, you need to navigate to the Controls section on your touchscreen. From there, go to Safety and search for Sentry Mode. Once you find it, click on it, and you’ll find View Live Camera. This is how you can watch the footage. You can even watch them from your phone using the Tesla Mobile App.

The same method applies to the Tesla Model S. You don’t need a different one to view your Sentry Mode clips on Model S.

How to View Sentry Mode Events Model 3

For the Tesla Model 3, you can easily view the Sentry Mode events by clicking on the Dashcam icon on your Tesla touchscreen. This will display all of the clips that the Tesla Sentry Mode has recorded.

If you want to watch the clips from your phone, you need to follow the same method you need to do with Tesla Model X and Model S. Just navigate to Controls > Safety & Security > Sentry Mode > View Live Camera.

If you were also looking for how to view Sentry Mode events in Model Y, follow the same steps as the Model 3, and you’ll be able to view the clips.

In conclusion, viewing Sentry Mode events on your Tesla is an easy process that can be done on all Tesla models. Just follow the steps mentioned above, and you’ll be able to view the clips in no time.

Troubleshooting: Can’t View Sentry Mode Events

Tesla owners have reported issues with viewing their Sentry Mode events. If you cannot find your clips, it is possible that they were not recorded due to technical issues, or there may be other issues preventing them from displaying.

The first step in troubleshooting this issue is to ensure that you have updated both your car and mobile software. Navigate to Controls > Software to check for pending updates. If there are any, update the software. If there are no updates available, try reinstalling the app.

If the issue persists, it is recommended to contact Tesla Customer Support for further assistance. They may be able to provide additional troubleshooting steps or escalate the issue to their technical team.

It is also important to ensure that the USB drive is properly formatted and inserted into the car. Check that the TeslaCam folder is present and that the Sentry Clips are saved in the Saved Clips folder. If you are still unable to view recorded events, try downloading the Sentry Mode event report from the Tesla mobile app or the internal storage of the USB flash drive.

In the event of vandalism, damage, or theft, Sentry Mode will automatically record video and send a notification to the owner through the mobile app. If you are unable to view recorded events, it is recommended to check your notification history and contact Tesla Customer Support immediately.

Overall, if you are experiencing issues with viewing Sentry Mode events, try updating your software, checking the USB drive, and contacting Tesla Customer Support for assistance.

Frequently Asked Questions (FAQs)

1. How to Retrieve Sentry Mode Footage?

To retrieve Sentry Mode footage, you need to ensure that the Dashcam is on and that you have inserted a USB flash drive into the USB port. Also, make sure that the Sentry Mode is turned on. All the footage is stored on the USB flash drive.

To retrieve the footage, connect the USB drive to a computer or laptop and copy the clips to them. This also frees up space on your USB flash drive.

2. Does Sentry Mode Work Without USB?

Yes, Sentry Mode works without a USB flash drive. However, the Dashcam must be enabled for the Sentry Mode to function. Without a USB drive, you cannot record any clips.

The Tesla Mobile App notifies you of any potential threats, and you can also get a live view from your camera. However, you cannot clip them unless you record your phone’s screen.

3. Will the Sentry Mode Drain Battery?

Technically, Sentry Mode will drain the battery. However, it won’t drain so much that your Tesla goes dead. If the battery charge falls below 20%, the Sentry Mode will automatically turn off.

It’s important to note that the Sentry Mode uses a considerable amount of power, especially if it is on for extended periods. Therefore, it is recommended to use the Sentry Mode with Premium Connectivity to ensure that the battery is not drained too much.

In summary, the Sentry Mode is a useful feature that helps deter potential threats to your parked Tesla. Retrieving Sentry Mode footage requires a USB flash drive, while the Dashcam must be enabled for the Sentry Mode to function. The Sentry Mode uses power and can drain the battery, but it automatically turns off when the battery charge falls below 20%.

Before We Leave

Before concluding this article, it is important to emphasize the significance of checking Sentry Mode clips if ever notified of suspicious activity. By following the steps outlined in this article, locating and viewing clips should no longer be a challenge. Always be vigilant and stay informed to ensure the utmost safety and security of your Tesla vehicle.

Frequently Asked Questions

How to Access Sentry Mode Footage from a Tesla Model Y?

To access Sentry Mode footage from a Tesla Model Y, follow these steps:

1. Insert a USB drive into the front USB port of the Model Y.
2. Enable Sentry Mode in the Security settings.
3. When Sentry Mode is triggered, the Model Y will record footage from its cameras onto the USB drive.
4. To access the footage, remove the USB drive from the Model Y and insert it into a computer.
5. The footage will be stored in a folder named “TeslaCam” on the USB drive.

What Steps are Needed to View Sentry Mode Events on a Tesla Model 3?

To view Sentry Mode events on a Tesla Model 3, follow these steps:

1. Unlock the Model 3 and ensure that it is parked.
2. Tap on the Tesla “T” logo at the top center of the touchscreen to open the main menu.
3. Scroll down and select “Sentry Mode” from the menu options.
4. On the Sentry Mode screen, you will see two options: “Enable” and “Disable”.
5. Tap on “Enable” to activate Sentry Mode.
6. When Sentry Mode is triggered, the Model 3 will record footage from its cameras.
7. To view the footage, navigate to Controls > Safety > Dashcam > Dashcam Viewer on the touchscreen.

Is it Possible to View Tesla Sentry Mode Recordings on My Phone?

Yes, it is possible to view Tesla Sentry Mode recordings on a phone. Follow these steps:

1. Download the Tesla app on your phone.
2. Log in to your Tesla account.
3. Tap on the “Controls” tab at the bottom of the screen.
4. Tap on “Security” and then “Sentry Mode”.
5. You will be able to view any Sentry Mode events that have been recorded by your Tesla.

Can I Disable Sentry Mode Viewing Notifications on My Tesla?

Yes, you can disable Sentry Mode viewing notifications on your Tesla. Follow these steps:

1. Tap on the Tesla “T” logo at the top center of the touchscreen to open the main menu.
2. Scroll down and select “Sentry Mode” from the menu options.
3. On the Sentry Mode screen, you will see two options: “Enable” and “Disable”.
4. Tap on “Disable” to deactivate Sentry Mode.
5. If you want to keep Sentry Mode activated but disable the notifications, go to Controls > Safety > Sentry Mode and turn off “Alarm” and “Display”.

How Do I Review Camera Footage Captured by Tesla’s Sentry Mode?

To review camera footage captured by Tesla’s Sentry Mode, follow these steps:

1. Insert a USB drive into the front USB port of the Tesla.
2. Enable Sentry Mode in the Security settings.
3. When Sentry Mode is triggered, the Tesla will record footage from its cameras onto the USB drive.
4. To review the footage, remove the USB drive from the Tesla and insert it into a computer.
5. The footage will be stored in a folder named “TeslaCam” on the USB drive.

Does Tesla’s Sentry Mode Continuously Record, or is it Motion-Activated?

Tesla’s Sentry Mode is motion-activated. When the Tesla detects motion or an impact, it will automatically start recording footage from its cameras. The footage will be saved onto a USB drive that is inserted into the front USB port of the Tesla.