Volkswagen Remote Not Working

As a certified Volkswagen service technician, I have seen firsthand the frustration and inconvenience that can come with a malfunctioning Volkswagen remote. A non-functional remote can make it difficult to access your vehicle, which can lead to missed appointments, lateness for work, and other inconveniences.

This guide will walk you through the steps to troubleshoot and potentially resolve the issue of a malfunctioning Volkswagen remote. The steps outlined in this guide are designed to be completed by the vehicle owner, and do not require any special tools or equipment.

By following the steps in this guide, you can help to restore functionality to your Volkswagen remote and get back to enjoying your vehicle.

Why Volkswagen Remote Not Working

Dead battery

The most common reason for a Volkswagen remote not working is a dead battery. The remote uses a small battery to power the transmitter, and if the battery dies, the remote will not be able to send a signal to the car. To check the battery, look for a small, round, flat battery in the back of the remote. If the battery is bulging or corroded, it needs to be replaced.

Weak signal

Another common reason for a Volkswagen remote not working is a weak signal. The remote uses a radio signal to communicate with the car, and if there is too much interference, the signal can be blocked. This can happen if you are in a city with a lot of tall buildings, or if you are near a large metal object. To improve the signal, try moving the remote closer to the car, or try standing in a different location.

Faulty remote

In some cases, the remote itself may be faulty. This can happen if the remote is dropped or damaged, or if the internal components are worn out. If you think the remote is faulty, you can try replacing the battery or taking it to a dealership for repairs.

Faulty key fob receiver

The key fob receiver is a small electronic device in the car that receives the signal from the remote. If the key fob receiver is faulty, it will not be able to receive the signal from the remote, and the remote will not work. If you think the key fob receiver is faulty, you can take the car to a dealership for repairs.

How to Troubleshoot: Volkswagen Remote Not Working

Your Volkswagen remote is an essential part of your car, allowing you to lock and unlock the doors, open the trunk, and start the engine. But what happens when your remote stops working?

There are a few common reasons why a Volkswagen remote might not work. In this article, we’ll walk you through the steps to troubleshoot the problem and get your remote working again.

Step 1: Check the battery

The most common reason for a Volkswagen remote not working is a dead battery. To check the battery, open the cover on the back of the remote and look for a small, round battery. If the battery is corroded or has leaked, it will need to be replaced.

To replace the battery, you will need a small Phillips head screwdriver. First, remove the cover on the back of the remote. Then, use the screwdriver to loosen the two screws that hold the battery in place. Carefully remove the old battery and replace it with a new one. Make sure that the positive side of the battery is facing up.

Once you have replaced the battery, close the cover on the back of the remote. Test the remote to make sure that it is working properly.

Step 2: Check the key fob antenna

The key fob antenna is a small metal rod that is located on the back of the remote. This antenna helps the remote communicate with your car. If the antenna is damaged or dirty, it can interfere with the signal and cause the remote to not work.

To check the antenna, look for any damage to the metal rod. If the antenna is damaged, you will need to replace the remote.

To clean the antenna, use a soft cloth to gently wipe it down. Be careful not to damage the antenna.

Step 3: Reset the remote

If the battery and antenna are in good condition, you may need to reset the remote. To reset the remote, follow these steps:

1. Turn off the ignition.
2. Press and hold the lock button on the remote for 5 seconds.
3. Release the lock button.
4. Turn on the ignition.

The remote should now be reset. Test the remote to make sure that it is working properly.

Step 4: Take your car to a dealership

If you have tried all of the above steps and your remote is still not working, you may need to take your car to a dealership. The dealership will be able to diagnose the problem and repair the remote.

Conclusion

Your Volkswagen remote is an important part of your car. If your remote stops working, it can be a real inconvenience. By following the steps in this article, you can troubleshoot the problem and get your remote working again.

If you have tried all of the above steps and your remote is still not working, you may need to take your car to a dealership. The dealership will be able to diagnose the problem and repair the remote.

Next Post To Read: Volkswagen Remote Start App Not Working