2016 Ford Expedition Heater Not Working: Here’s the Fix!

Do you own a 2016 Ford Expedition and your heater isn’t working You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there is a fix.

In this guide, I’ll walk you through the steps to troubleshoot the problem and get your heater working again. I’ll also provide some tips on how to prevent this issue from happening in the future.

So if your 2016 Ford Expedition heater isn’t working, read on for help.

Reasons Why 2016 Ford Expedition Heater Not Working

Here are the reasons:

Low Coolant Level

Low coolant level can lead to insufficient heat in the heater core
resulting in poor or no heat from the vents.

Thermostat Malfunction

A malfunctioning thermostat can cause the engine to not reach the optimal temperature for the heater to produce warm air.

Heater Core Blockage

A blockage in the heater core can restrict the flow of hot coolant
leading to a lack of warm air from the vents.

Blend Door Actuator Failure

A faulty blend door actuator can prevent the proper mixing of hot and cold air
resulting in no heat from the heater.

How to Troubleshoot: 2016 Ford Expedition Heater Not Working

Symptoms of a 2016 Ford Expedition Heater Not Working

There are a few different symptoms that you may experience if your 2016 Ford Expedition heater is not working properly. These include:

The heater does not blow hot air.
The heater blows cold air even when the temperature is set to high.
The heater makes a strange noise when it is turned on.
The heater smells like burning plastic or rubber.
The heater is not blowing air at all.

If you are experiencing any of these symptoms, it is important to have your vehicle diagnosed by a qualified mechanic as soon as possible. A faulty heater can be dangerous, as it can make it difficult to stay warm in cold weather.

Possible Causes of a 2016 Ford Expedition Heater Not Working

There are a number of different things that could cause your 2016 Ford Expedition heater to stop working. These include:

A faulty thermostat.
A clogged heater core.
A faulty blower motor.
A faulty blend door actuator.
A faulty control module.

How to Troubleshoot a 2016 Ford Expedition Heater Not Working

If your 2016 Ford Expedition heater is not working, you can troubleshoot the problem yourself by following these steps:

1. Check the thermostat:
The thermostat is responsible for regulating the temperature of the coolant in your vehicle’s engine. If the thermostat is stuck open or closed, it can prevent the heater from working properly. To check the thermostat, you will need to remove it from the engine and test it with a thermometer.

2. Check the heater core:
The heater core is a radiator that is located in the passenger compartment of your vehicle. It is responsible for heating the air that is blown into the cabin. If the heater core is clogged, it will prevent the air from being heated properly. To check the heater core, you will need to remove it from the vehicle and flush it with water.3. Check the blower motor:
The blower motor is responsible for blowing air through the heater core. If the blower motor is faulty, it will not be able to blow air through the heater core and into the cabin. To check the blower motor, you will need to remove it from the vehicle and test it with a multimeter.

4. Check the blend door actuator:
The blend door actuator is responsible for controlling the flow of air through the heater core. If the blend door actuator is faulty, it will not be able to direct the air through the heater core and into the cabin. To check the blend door actuator, you will need to remove it from the vehicle and test it with a multimeter.

5. Check the control module:
The control module is responsible for sending signals to the heater core, blower motor, and blend door actuator. If the control module is faulty, it will not be able to properly control the operation of the heater. To check the control module, you will need to use a diagnostic scan tool.

How to Fix a 2016 Ford Expedition Heater Not Working

Once you have identified the cause of the problem, you can fix the 2016 Ford Expedition heater by following these steps:

1. Replace the thermostat:
If the thermostat is faulty, you will need to replace it with a new one.

2. Flush the heater core:
If the heater core is clogged, you will need to flush it with water to remove the debris.3. Replace the blower motor:
If the blower motor is faulty, you will need to replace it with a new one.

4. Replace the blend door actuator:
If the blend door actuator is faulty, you will need to replace it with a new one.

5. Replace the control module:
If the control module is faulty, you will need to replace it with a new one.

Preventing a 2016 Ford Expedition Heater from Not Working

There are a few things that you can do to prevent your 2016 Ford Expedition heater from not working:

Keep the coolant level in your vehicle topped off:
A low coolant level can cause the thermostat to stick open or closed, which can prevent the heater from working properly.

Have your vehicle serviced regularly:
A regular maintenance schedule can help to identify and fix potential problems before they cause your heater to stop working.

Avoid driving through deep water:
Driving through deep

Also Read: 2016 Ford Expedition Remote Start Not Working

FAQs: 2016 Ford Expedition Heater Not Working

Why is my 2016 Ford Expedition heater not working?

There are a few possible reasons why your 2016 Ford Expedition heater might not be working. Here are some of the most common causes:

A faulty thermostat. The thermostat is responsible for regulating the temperature of the coolant in your engine. If the thermostat is stuck open or closed, it can prevent the coolant from flowing through the heater core, which will result in a lack of heat in the cabin.

A faulty coolant temperature sensor. The coolant temperature sensor sends a signal to the computer that tells it how hot the coolant is. If the sensor is faulty, the computer may not be able to properly regulate the temperature of the coolant, which can also lead to a lack of heat in the cabin.

A faulty heater core. The heater core is a radiator that is located inside the passenger compartment. It is responsible for transferring heat from the coolant to the air that flows through the cabin. If the heater core is clogged or damaged, it will not be able to transfer heat efficiently, which will result in a lack of heat in the cabin.

A faulty blend door actuator. The blend door actuator is responsible for controlling the flow of air through the heater core. If the actuator is faulty, it may not be able to properly direct the air through the heater core, which will result in a lack of heat in the cabin.

A faulty blower motor. The blower motor is responsible for blowing air through the heater core. If the blower motor is faulty, it will not be able to provide enough air to the heater core, which will result in a lack of heat in the cabin.

How do I fix my 2016 Ford Expedition heater?

The first step to fixing your 2016 Ford Expedition heater is to determine the cause of the problem. Once you have determined the cause, you can then take the appropriate steps to fix it. Here are some tips for fixing a 2016 Ford Expedition heater:

Check the thermostat: If the thermostat is stuck open or closed, it can prevent the coolant from flowing through the heater core, which will result in a lack of heat in the cabin. To check the thermostat, you will need to remove it from the engine and test it with a thermometer. If the thermostat is faulty, you will need to replace it.

Check the coolant temperature sensor: The coolant temperature sensor sends a signal to the computer that tells it how hot the coolant is. If the sensor is faulty, the computer may not be able to properly regulate the temperature of the coolant, which can also lead to a lack of heat in the cabin. To check the coolant temperature sensor, you will need to disconnect it from the computer and test it with a multimeter. If the sensor is faulty, you will need to replace it.

Check the heater core: The heater core is a radiator that is located inside the passenger compartment. It is responsible for transferring heat from the coolant to the air that flows through the cabin. If the heater core is clogged or damaged, it will not be able to transfer heat efficiently, which will result in a lack of heat in the cabin. To check the heater core, you will need to remove it from the vehicle and inspect it for damage. If the heater core is damaged, you will need to replace it.

Check the blend door actuator: The blend door actuator is responsible for controlling the flow of air through the heater core. If the actuator is faulty, it may not be able to properly direct the air through the heater core, which will result in a lack of heat in the cabin. To check the blend door actuator, you will need to disconnect it from the blend door and test it with a multimeter. If the actuator is faulty, you will need to replace it.

Check the blower motor: The blower motor is responsible for blowing air through the heater core. If the blower motor is faulty, it will not be able to provide enough air to the heater core, which will result in a lack of heat in the cabin. To check the blower motor, you will need to disconnect it from the battery and test it with a multimeter. If the blower motor is faulty, you will need to replace it.

What are some common symptoms of a 2016 Ford Expedition heater not working?

Here are some of the most common symptoms of a 2016 Ford Expedition heater not working:

No heat coming from the vents. This is the most obvious symptom of a faulty heater. If you do not feel any heat coming from the vents, even when the