Tesla Model X Falcon Door Won’t Open: Troubleshooting Tips
If you own a Tesla Model X, you may have experienced the frustration of falcon doors that won’t open or get stuck halfway. This issue can be caused by a variety of factors, such as internal errors, GPS lock on latitude and longitude data, or sensor malfunctions.
Fortunately, there are some potential solutions you can try. One option is to use the FWD/MCU screen key, while another is to reset the Tesla or clean the b-pillar. Additionally, calibrating the Tesla may help resolve the issue. In this article, we will explore these methods in detail and provide step-by-step instructions to help you troubleshoot your falcon door woes.
Try These Solutions to Open Falcon Door (Tesla Model X)
If you are experiencing issues with your Tesla Model X Falcon Door, there are some solutions you can try to fix the problem. Below are some of the common issues and their corresponding fixes.
Issue 1: Tesla Model X Doors Not Opening All the Way
If your Tesla Model X door is not opening all the way, it might be due to a fresh GPS lock on geographic coordinate system (latitude + longitude) data. You can fix this issue by finding the FWD touchable button and clicking on it.
To fix this issue:
- Press the falcon door handle on the wide side (since it contains a sensor to open the door).
- Wait for the falcon door to release halfway.
- If you’re standing on the passenger side of the Tesla, look for the FWD physical button on the right-side b-pillar or MCU screen button. Then again, locate the same button on the driver’s side of Tesla on the left-side b-pillar or MCU screen button.
- Click on the located button for 5 – 8 seconds until you see the door uplifting to open fully.
- In the MCU screen, you’ll find a pop-up prompt that says ‘Fully Open at This Location’ bar. Hit on it to open the falcon door on the left or right side.
Warning: The falcon doors might not open if it senses obstacles on the front side. So, keep a safe distance when trying the above method.
Issue 2: Falcon Door Not Opening or Stuck
If your Falcon Door is not opening or is stuck, it might be due to overload or internal bugs. You can fix this issue by doing a basic system reset or cleaning leftover snow and water.
To fix this issue:
- Change your car into park mode.
- Hold and press the 2 scroll keys of the steering wheel for up to 10 – 15 seconds. During the procedure, you can kick the brake pedal.
- Leave the keys and pedal after the screen goes blank.
- Wait for 20 – 30 seconds to complete the reset procedure.
- Next, take a dry rag and brush to wipe out the snow that you can reach to remove these.
- Instead of using a door handle or key fob, open the falcon doors using the touchscreen as it will help the leftover snow or water to get out.
**Warning: **Do not open the front door (approximately 20°) or place obstacles or your finger as it can open/close by causing bodily damage.
Issue 3: Tesla Model X Falcon Door Not Opening at All
If your Tesla Model X Falcon Door is not opening at all, it might be due to the car sensing obstacles and getting confused by sensing you as an object. You can fix this issue by recalibrating the falcon doors using touchscreen settings.
To fix this issue:
- Before you start the Tesla Model X falcon door reset procedure, place your car in a safe zone with no obstacles.
- Close the 4 doors by clicking on the Lock button on the touchscreen that shows Tesla’s position.
- Click on the Tesla icon to go to the Quick Controls option.
- Then, press the Service > Calibrate Doors option.
- A prompt will pop open on the screen. Hold and click on the Calibrate Doors bar until the calibration is accomplished.
- Test the falcon doors if they work or not.
By following these solutions, you can fix most of the common issues with your Tesla Model X Falcon Door. If the issue still persists, you can contact Tesla support for further troubleshooting.
Wrap Up
In conclusion, if you encounter the issue of the Tesla Model X falcon door not opening, there are a few techniques you can try to fix it. By pressing the falcon door handle on the wide side, waiting for the door to release halfway, and using the physical button on the right-side b-pillar or MCU screen button, you may be able to resolve the issue. If these methods don’t work, it’s recommended to contact Tesla Care Service to replace the problematic parts. Remember to stay patient and not panic during the process. Additionally, there are helpful videos available online that can guide you through the process.
Frequently Asked Questions
How to Manually Open a Tesla Model X Falcon Door if it’s Not Responding?
If a Tesla Model X falcon door is not responding, it can be manually opened by pressing the falcon door handle on the wide side since it contains a sensor to open the door. If the door still does not open, the passenger side of the Tesla has a physical button on the right-side b-pillar or MCU screen button that can be used to release the door.
What Steps Should be Taken to Reset the Falcon Doors on a Tesla Model X?
To reset the falcon doors on a Tesla Model X, the following steps should be taken:
- Locate the Falcon Wing door control button on the dashboard.
- Press and hold the button until the doors begin to move.
- Once the doors have completed their cycle, release the button.
- Wait for the doors to fully close and latch before attempting to open them again.
Why Might a Falcon Door on a Tesla Model X Not Open Completely?
A falcon door on a Tesla Model X may not open completely due to an obstruction in the door’s path, a malfunctioning sensor, or a misaligned door. In some cases, the door may also be prevented from opening if the vehicle is parked on an incline.
What Could Cause a Tesla Model X Door to Not Unlock from the Outside?
A Tesla Model X door may not unlock from the outside due to a malfunctioning key fob, a dead battery in the key fob, or a faulty door lock actuator. In some cases, the issue may also be caused by a malfunctioning sensor or a misaligned door.
How Can an Obstruction be Cleared from a Tesla Model X Falcon Door Sensor?
To clear an obstruction from a Tesla Model X falcon door sensor, the following steps can be taken:
- Locate the sensor on the door.
- Use a soft cloth or brush to gently clean the sensor.
- Check for any objects that may be blocking the sensor’s path and remove them if necessary.
What Troubleshooting Methods can Resolve a Falcon Door Issue on a Tesla Model X?
If a falcon door issue is encountered on a Tesla Model X, the following troubleshooting methods can help to resolve the issue:
- Check for any obstructions in the door’s path and remove them if necessary.
- Inspect the door for any signs of damage or misalignment and address the issue if found.
- Reset the door using the Falcon Wing door control button on the dashboard.
- Manually open the door using the physical button on the b-pillar or MCU screen button.
- Contact Tesla customer support for further assistance if the issue persists.